Actuator failure detection and isolation using generalized momenta
暂无分享,去创建一个
[1] Hassan Hammouri,et al. Observer-based approach to fault detection and isolation for nonlinear systems , 1999, IEEE Trans. Autom. Control..
[2] Paul M. Frank,et al. Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy: A survey and some new results , 1990, Autom..
[3] Guangjun Liu. Control of robot manipulators with consideration of actuator performance degradation and failures , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).
[4] M. Spong. Modeling and Control of Elastic Joint Robots , 1987 .
[5] Joseph R. Cavallaro,et al. A dynamic fault tolerance framework for remote robots , 1995, IEEE Trans. Robotics Autom..
[6] Paul M. Frank,et al. Observer-based supervision and fault detection in robots using nonlinear and fuzzy logic residual evaluation , 1996, IEEE Trans. Control. Syst. Technol..
[7] Bernd Freyermuth. An approach to model based fault diagnosis of industrial robots , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.
[8] Alessandro De Luca,et al. Stabilization of an underactuated planar 2R manipulator , 2000 .
[9] Bruno Siciliano,et al. Modeling and Control of Robot Manipulators , 1995 .
[10] Alberto Isidori,et al. A geometric approach to nonlinear fault detection and isolation , 2000, IEEE Trans. Autom. Control..
[11] Ian D. Walker,et al. Fault detection for robot manipulators with parametric uncertainty: a prediction error based approach , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).
[12] Ian D. Walker,et al. Observer-based fault detection for robot manipulators , 1997, Proceedings of International Conference on Robotics and Automation.