Comparative evaluation of bidirectional buck-type PFC converter systems for interfacing residential DC distribution systems to the smart grid

This paper discusses three-phase bidirectional high-power factor mains interfaces for application in smart-houses featuring a local DC distribution grid. The DC grid demanded power can be supplied by local DC generators, such as renewable power sources, and/or by the public three-phase AC mains, which gives the option of feeding back power into the mains in case of a low local power consumption. In order to generate a local 400V DC bus, bidirectionally connected to the European three-phase low voltage AC mains rated at 400V line-to-line, buck-type converter topologies are required. Several possible converter concepts are initially presented and further comparatively evaluated based on the following performance indices: total required semiconductor chip area, overall efficiency, overall passive components volume, and required EMI filter damping. As result of the comprehensive evaluation, the Bidirectional 3rd Harmonic Injection Active Filter Type Rectifier with DC/DC Output Stage is identified as most advantageous topology for the realization of a bidirectional buck-type PFC rectifier in the considered power range of 5 to 10 kW.

[1]  T. Friedli,et al.  Swiss rectifier — A novel three-phase buck-type PFC topology for Electric Vehicle battery charging , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[2]  A. Pratt,et al.  Evaluation of 400V DC distribution in telco and data centers to improve energy efficiency , 2007, INTELEC 07 - 29th International Telecommunications Energy Conference.

[3]  Tomonobu Senjyu,et al.  Optimal operation method for DC smart-house with smart grid considering forecasted error , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[4]  T. Friedli,et al.  Towards a 99% Efficient Three-Phase Buck-Type PFC Rectifier for 400-V DC Distribution Systems , 2012, IEEE Transactions on Power Electronics.

[5]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[6]  J.W. Kolar,et al.  Comprehensive Design of a Three-Phase Three-Switch Buck-Type PWM Rectifier , 2007, IEEE Transactions on Power Electronics.

[7]  Keiichi Hirose,et al.  Development of 400 Vdc power distribution system and 400 Vdc output rectifier , 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

[8]  J. Biela,et al.  Core Losses Under the DC Bias Condition Based on Steinmetz Parameters , 2012, IEEE Transactions on Power Electronics.

[9]  N. Burany,et al.  Safe control of four-quadrant switches , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[10]  M. Jantsch,et al.  Inverters with three phase output and without electrolyte capacitor for improved lifetime, efficiency and costs of grid connected systems , .

[11]  T. Friedli,et al.  A Semiconductor Area Based Assessment of AC Motor Drive Converter Topologies , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[12]  Seung-Ki Sul,et al.  A new circuit design and control to reduce input harmonic current for a three-phase ac machine drive system having a very small dc-link capacitor , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[13]  Johann W. Kolar,et al.  Comparison of the chip area usage of 2-level and 3-level voltage source converter topologies , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[14]  Johann W. Kolar,et al.  The essence of three-phase PFC rectifier systems , 2011, 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC).

[15]  J.W. Kolar,et al.  Novel Three-Phase AC–AC Sparse Matrix Converters , 2007, IEEE Transactions on Power Electronics.

[16]  J. W. Kolar,et al.  Hybrid Active Third-Harmonic Current Injection Mains Interface Concept for DC Distribution Systems , 2013, IEEE Transactions on Power Electronics.