Performance Analysis of a Boost Converter with Components Losses

A theoretical study of a conventional boost converter is presented. Based on the real behavior of the components, two models of the boost converter are introduced: one dealing only with losses through inductor and capacitor and another taking into account switching losses in addition to resistive ones. From these two models, the detailed analytical expressions of both voltage gain factor and conversion efficiency are established taking into account the losses through parasitic resistances and switching losses. The behavior of the converter is then analyzed for each model by simulation for the voltage gain factor and the conversion efficiency.

[1]  X. Ruan,et al.  Non-isolated high step-up DC–DC converter adopting auxiliary capacitor and coupled inductor , 2018 .

[2]  Michel Aillerie,et al.  New Topology of Photovoltaic Microinverter based on Boost converter , 2017 .

[3]  Mohd Amran Mohd Radzi,et al.  A current and future study on non-isolated DC–DC converters for photovoltaic applications , 2013 .

[4]  Tsorng-Juu Liang,et al.  Loss analysis and optimized design of DC-DC converter for battery module , 2017, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia).

[5]  I. Batarseh,et al.  Power losses estimation platform for power converters , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[6]  V. Agarwal,et al.  A novel, high efficiency, high gain, front end DC-DC converter for low input voltage solar photovoltaic applications , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[7]  Frede Blaabjerg,et al.  Analysis of loss distribution of Conventional Boost, Z-source and Y-source Converters for wide power and voltage range , 2017 .

[8]  Keng Wu.  Power Converters with Digital Filter Feedback Control , 2016 .

[9]  Byamakesh Nayak,et al.  Control analysis and experimental verification of a practical dc–dc boost converter , 2015 .

[10]  Andrej Sarjaš,et al.  FPGA-based control of a DC-DC boost converter , 2015 .

[11]  Reshmi C Variath,et al.  A review of module inverter topologies suitable for photovoltaic systems , 2010, 2010 Conference Proceedings IPEC.

[12]  Om Prakash Mahela,et al.  Comprehensive overview of grid interfaced solar photovoltaic systems , 2017 .

[13]  Haibing Hu,et al.  A single stage micro-inverter based on a three-port flyback with power decoupling capability , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[14]  Yu Tang,et al.  A high step-up voltage gain DC/DC converter for the micro-inverter , 2013, 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA).

[15]  J.A. Ferreira,et al.  Methods for experimental assessment of component losses to validate the converter loss model , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[16]  Shuhui Li,et al.  Integrating photovoltaic and power converter characteristics for energy extraction study of solar PV systems , 2011 .

[17]  Robert W. Erickson,et al.  Fundamentals of Power Electronics , 2001 .

[18]  Dong-Hyun Lee,et al.  A study on the loss model and characteristic comparison of three-level converter and full-bridge converter through the conduction loss analysis of power devices , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[19]  E Duran,et al.  A High Flexibility DC Load for Fuel Cell and Solar Arrays Power Sources Based on DC-DC Converters , 2011, IDEAS 2011.

[20]  Marian K. Kazimierczuk,et al.  Pulse-Width Modulated DC-DC Power Converters , 2008 .

[21]  Keng C. Wu.  Pulse width modulated DC/DC converters , 1997 .

[22]  R. Rajesh,et al.  A comprehensive review of photovoltaic systems , 2015 .

[23]  Razman Ayop,et al.  Design of boost converter based on maximum power point resistance for photovoltaic applications , 2018 .

[24]  Nikolay Hinov,et al.  Comparative loss analysis of boost and synchronous boost DC-DC converters , 2017, 2017 XXVI International Scientific Conference Electronics (ET).

[25]  K. Takao,et al.  Power loss design platform for high output power density converters , 2007, 2007 European Conference on Power Electronics and Applications.

[26]  Janis Zakis,et al.  Impact of Component Losses on the Efficiency of a New Quasi-Z-Source-Based Dual Active Bridge , 2013, DoCEIS.

[27]  M. Kesraoui,et al.  Maximum power point tracker of wind energy conversion system , 2011 .

[28]  Stefan Daraban,et al.  Low cost single stage micro-inverter with MPPT for grid connected applications , 2013 .

[29]  Wuhua Li,et al.  A Review of Non-Isolated High Step-Up DC/DC Converters in Renewable Energy Applications , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[30]  Quan Li,et al.  A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations , 2008, IEEE Transactions on Power Electronics.

[31]  Abdullah Abusorrah,et al.  Stability of a boost converter fed from photovoltaic source , 2013 .