Condition-Based Production Planning: Adjusting Production Rates to Balance Output and Failure Risk

Problem Definition: Many production systems deteriorate over time as a result of load and stress caused by production. The deterioration rate of these systems typically depends on the production ra...

[1]  Viliam Makis,et al.  Reliability estimation of a system subject to condition monitoring with two dependent failure modes , 2016 .

[2]  Zhiqiang Lu,et al.  Integrated production and preventive maintenance scheduling for a single machine with failure uncertainty , 2015, Comput. Ind. Eng..

[3]  Xiao Liu,et al.  Condition-based maintenance for continuously monitored degrading systems with multiple failure modes , 2013 .

[4]  Yisha Xiang,et al.  A review on condition-based maintenance optimization models for stochastically deteriorating system , 2017, Reliab. Eng. Syst. Saf..

[5]  W. Rudin.  Principles of mathematical analysis , 1964 .

[6]  H. Zhang,et al.  Optimal and Hierarchical Controls in Dynamic Stochastic Manufacturing Systems: A Survey , 2002, Manuf. Serv. Oper. Manag..

[7]  Francesco Martinelli,et al.  Manufacturing Systems With a Production Dependent Failure Rate: Structure of Optimality , 2010, IEEE Transactions on Automatic Control.

[8]  Francesco Martinelli,et al.  Optimality of a Two-Threshold Feedback Control for a Manufacturing System With a Production Dependent Failure Rate , 2007, IEEE Transactions on Automatic Control.

[9]  Burak Kazaz,et al.  The impact of process deterioration on production and maintenance policies , 2013, Eur. J. Oper. Res..

[10]  Izak Duenyas,et al.  Integrated maintenance and production control of a deteriorating production system , 2002 .

[11]  Bram de Jonge,et al.  Optimizing block-based maintenance under random machine usage , 2018, Eur. J. Oper. Res..

[12]  Tiedo Tinga,et al.  The influence of practical factors on the benefits of condition-based maintenance over time-based maintenance , 2017, Reliab. Eng. Syst. Saf..

[13]  Izak Duenyas,et al.  Optimal Pricing, Production, and Inventory for New Product Diffusion Under Supply Constraints , 2014, Manuf. Serv. Oper. Manag..

[14]  J. George Shanthikumar,et al.  COMBINED PRODUCTION AND MAINTENANCE SCHEDULING FOR A MULTIPLE‐PRODUCT, SINGLE‐ MACHINE PRODUCTION SYSTEM , 2009 .

[15]  Rezg Nidhal,et al.  Joint optimisation of maintenance and production policies considering random demand and variable production rate , 2012 .

[16]  Francesco Martinelli.  Control of manufacturing systems with a two-value, production-dependent failure rate , 2005, Autom..

[17]  Mustapha Nourelfath,et al.  Integrated load distribution and production planning in series-parallel multi-state systems with failure rate depending on load , 2012, Reliab. Eng. Syst. Saf..

[18]  Yingning Qiu,et al.  Monitoring wind turbine gearboxes , 2013 .

[19]  Tieling Zhang,et al.  Condition Based Maintenance and Operation of Wind Turbines , 2015 .

[20]  El-Kébir Boukas,et al.  Robust production and maintenance planning in stochastic manufacturing systems , 1995, IEEE Trans. Autom. Control..

[21]  Lisa M. Maillart,et al.  Reassessing Tradeoffs Inherent to Simultaneous Maintenance and Production Planning , 2012 .

[22]  M. Caramanis,et al.  Production control of manufacturing systems with production rate-dependent failure rates , 1994, IEEE Trans. Autom. Control..

[23]  Jan M. van Noortwijk,et al.  A survey of the application of gamma processes in maintenance , 2009, Reliab. Eng. Syst. Saf..

[24]  Kouedeu Annie Francie,et al.  Stochastic optimal control of manufacturing systems under production-dependent failure rates , 2014 .

[25]  Viliam Makis,et al.  Joint Optimization of Sampling and Control of Partially Observable Failing Systems , 2013, Oper. Res..

[26]  X. Jiang,et al.  Optimal Replacement Under Partial Observations , 2003, Math. Oper. Res..

[27]  Chen-Khong Tham,et al.  Analysis and optimization of service availability in a HA cluster with load-dependent machine availability , 2007, IEEE Transactions on Parallel and Distributed Systems.

[28]  Seyed M. R. Iravani,et al.  Workforce Agility in Repair and Maintenance Environments , 2007, Manuf. Serv. Oper. Manag..

[29]  Hajej Zied,et al.  Optimal integrated maintenance/production policy for randomly failing systems with variable failure rate , 2011 .

[30]  Jerzy Filus.  The load optimization of a repairable system with gamma-distributed time-to-failure , 1987 .

[31]  Jianchao Zeng,et al.  Joint optimization of condition-based opportunistic maintenance and spare parts provisioning policy in multiunit systems , 2017, Eur. J. Oper. Res..

[32]  Ravishankar K. Iyer,et al.  A Measurement-Based Model for Workload Dependence of CPU Errors , 1986, IEEE Transactions on Computers.

[33]  Jianqiang Hu,et al.  Optimality of hedging point policies in the production control of failure prone manufacturing systems , 1994, IEEE Trans. Autom. Control..

[34]  Bahar Biller,et al.  Managing Rentals with Usage-Based Loss , 2016, Manuf. Serv. Oper. Manag..

[35]  Hao Peng,et al.  Joint optimization of condition-based maintenance and production lot-sizing , 2016, Eur. J. Oper. Res..

[36]  Janez Kopac,et al.  Wear mechanisms of cutting tools in high-speed cutting processes , 2001 .

[37]  Burak Kazaz,et al.  Production policies under deteriorating process conditions , 2008 .

[38]  Ruud H. Teunter,et al.  Joint condition-based maintenance and inventory optimization for systems with multiple components , 2017, Eur. J. Oper. Res..

[39]  Raul Poler,et al.  Models for production planning under uncertainty: A review ☆ , 2006 .

[40]  Martin L. Puterman,et al.  Markov Decision Processes: Discrete Stochastic Dynamic Programming , 1994 .

[41]  Shaomin Wu,et al.  A condition-based maintenance policy for degrading systems with age- and state-dependent operating cost , 2017, Eur. J. Oper. Res..

[42]  Malgorzata M. O'Reilly,et al.  Stochastic model for maintenance in continuously deteriorating systems , 2017, Eur. J. Oper. Res..

[43]  T. W. Sloan,et al.  A periodic review production and maintenance model with random demand, deteriorating equipment, and binomial yield , 2004, J. Oper. Res. Soc..