Injection forging: engineering and research

Injection forging is a nett-shape manufacturing process which enables the forming of complex component-forms that are difficult to form by conventional metal-conversion processes. The state-of-the-art of the research in this subject is reviewed with reference to different process configurations, forming limits, energy/pressure requirements, process modelling and product forms.

[1]  Yi Qin,et al.  Simulation of the forming sequence of pressure-assisted injection forging of thick-walled tubes , 1995 .

[2]  R. Balendra.  Process mechanics of injection upsetting , 1985 .

[3]  R. Balendra.  Pressure to effect injection forming , 1990 .

[4]  S. Sheljaskov.  Current level of development of warm forging technology , 1994 .

[5]  Yi Qin,et al.  FE simulation of the development of flaws during injection forging , 1994 .

[6]  B. Lengyel,et al.  Forming Flanged Components by Upsetting , 1988 .

[7]  Yi Qin,et al.  Computer-aided design and assessment of tools and components for nett-shape manufacturing , 1995 .

[8]  Mitsugu Motomura,et al.  Improvement of limit deformability of aluminum disc by lateral extrusion method. , 1993 .

[9]  L. Schuler.  Metal forming handbook , 1966 .

[10]  L. A. Moreira Filho,et al.  Unconventional Tee Forming on Metal Tubes , 1985 .

[11]  S. Thiruvarudchelvan,et al.  Elastomers in metal forming: A review , 1993 .

[12]  Yi Qin,et al.  Material-flow Considerations for the Design of Injection Forging , 1997 .

[13]  Yi Qin,et al.  Computer-aided design of nett-forming by injection forging of engineering components , 1998 .

[14]  Yi Qin,et al.  Development of the flaws during injection forging , 1994 .

[15]  Alan N Bramley,et al.  Non-conventional cold extrusion , 1992 .

[16]  Paulo A.F. Martins,et al.  The avoidance of defects in radially extruded tubular parts by preforming , 1997 .

[17]  Rajendram Balendra.  Injection-chamber to die-cavity interface for injection forming , 1993 .

[18]  Paulo A.F. Martins,et al.  Production of tubular components by radial extrusion — a finite element analysis , 1994 .

[19]  Rajendram Balendra,et al.  Feasibility and limitations of pressure-assisted injection forging of thick-walled tubes , 1996 .

[20]  G. W. Vickers,et al.  Simulation of the Heading Process , 1975 .

[21]  Tarras Wanheim,et al.  Geometrical analysis of 3-D bulk-forming processes by physical simulation , 1990 .

[22]  Shiro Kobayashi,et al.  Metal forming and the finite-element method , 1989 .

[23]  Mitsugu Motomura,et al.  Deformations pattern of unaxisymmetrical flat aluminum products by lateral extrusion method. , 1993 .

[24]  Paulo A.F. Martins,et al.  Review of research into the injection forging of tubular materials , 1995 .

[25]  M. A. Hijazi,et al.  Evaluation of injection upsetting models , 1989 .

[26]  H. Pugh.  The Mechanical Properties and Deformation Characteristics of Metals and Alloys Under Pressure , 1965 .

[27]  R. Balendra.  Considerations in the modelling of injection upsetting , 1987 .

[28]  Taylan Altan,et al.  Recent developments in tooling, machines and research in cold forming of complex parts , 1992 .

[29]  Paulo A.F. Martins,et al.  Extended Formability Limits for Tubular Components Through Combined Injection Forming/Upsetting—A Finite Element Analysis , 1995 .

[30]  F. Jovane,et al.  Free Surface Profiles and Workability Limits in the Heading Process , 1982 .

[31]  H. Al-Qureshi.  Factors affecting the strain distributions of thin-walled tubes using polyurethane rod , 1971 .

[32]  R Balendra.  Exit-geometry for Injection Forming , 1988 .

[33]  Yi Qin,et al.  Technical evaluation of pressure-assisted injection forging of thick-walled tubes , 1995 .

[34]  Takashi Nakano,et al.  Modern applications of complex forming and multi-action forming in cold forging , 1994 .

[35]  B. Lengyel,et al.  Strain and Pressure Distribution in Extrusion Containers , 1977 .

[36]  Walter Osen,et al.  Deformation pattern, forces and process limits in combined radial and backward can extrusion , 1985 .

[37]  B. N. Cole,et al.  Study of the Injection Upsetting of Metals , 1973 .

[38]  S. A. Shahmoradi,et al.  Cold Extrusion of Flanges on Cylindrical Hollows , 1993 .

[39]  Yi Qin,et al.  Pressured-assisted injection forging of thick-walled tubes , 1995 .

[40]  H. A. Al-Qureshi,et al.  Analysis of unconventional tee forming on metal tubes , 1994 .