The effect of evaporation on the wicking of liquids into a metallic weave.

Wicking of liquids into porous media is of great importance to many applications. One example are propellant management devices (PMD) used in spacecraft tanks. PMDs are designed to ensure gas free delivery of propellant during all acceleration conditions of the flight. This might be achieved by a metallic weave which is wetted by the propellant and thus prevents gas from entering below a critical bubble point pressure. In the case of cryogenic or volatile liquids the weave may dry out and refilling of the structure becomes an important issue. In this study we analyze the wicking of different liquids into a dry Dutch twilled weave (DTW 200 x 1400) by combining experimental and analytical approaches. Experiments were performed under isothermal and terrestrial conditions to investigate the role of evaporation for the capillary rise. The standard wicking model from Lucas and Washburn is enhanced to account for evaporation and gravity effects, too. By comparing the experimental results with the enhanced wicking model we find good qualitative agreement. It is also noted that evaporation may have a major impact on the wicking process.

[1]  E. Symons.  Wicking of liquids in screens , 1974 .

[2]  J. Rollins,et al.  Twenty-three years of surface tension propellant management system design, development, manufacture, test, and operation , 1985 .

[3]  N. Fries,et al.  Wicking of Perfectly Wetting Liquids into a Metallic Mesh , 2007 .

[4]  E. Chibowski,et al.  Problems of contact angle and solid surface free energy determination. , 2002, Advances in colloid and interface science.

[5]  Hans J. Rath,et al.  Capillary driven flow in circular cylindrical tubes , 2003 .

[6]  Vapor flow into a capillary propellant-acquisition device , 1984 .

[7]  A. Marmur.  Penetration and displacement in capillary systems of limited size , 1992 .

[8]  N. Fries,et al.  An analytic solution of capillary rise restrained by gravity. , 2008, Journal of colloid and interface science.

[9]  E. J. Watson,et al.  A theory of capillary rise of a liquid in a vertical cylindrical tube and in a parallel-plate channel , 1980 .

[10]  Abraham Marmur,et al.  Kinetics of penetration into uniform porous media: Testing the equivalent-capillary concept , 2003 .

[11]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[12]  I N Bronstein,et al.  Taschenbuch der Mathematik , 1966 .

[13]  E. W. Washburn.  The Dynamics of Capillary Flow , 1921 .

[14]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[15]  J. Schultz,et al.  Effect of dynamic contact angle on capillary rise phenomena , 2000 .

[16]  Richard L. Hoffman,et al.  A study of the advancing interface , 1983 .

[17]  J. Armour,et al.  Fluid flow through woven screens , 1968 .

[18]  R. H. Brooks,et al.  Hydraulic properties of porous media , 1963 .

[19]  P. Behruzi,et al.  CONCEPT ANALYSIS OF PMD DESIGNS FOR FUTURE UPPER STAGES , 2003 .

[20]  D. Quéré,et al.  Inertial capillarity , 1997 .

[21]  Richard Lucas,et al.  Ueber das Zeitgesetz des kapillaren Aufstiegs von Flüssigkeiten , 1918 .

[22]  R. Hoffman.  A study of the advancing interface. I. Interface shape in liquid—gas systems , 1975 .

[23]  Basil N. Antar,et al.  Fundamentals of Low Gravity Fluid Dynamics and Heat Transfer , 1993 .

[24]  M. Kirkham,et al.  Extended methodology for determining wetting properties of porous media , 2003 .

[25]  Zhaohui Li,et al.  Determination of contact angles and pore sizes of porous media by column and thin layer wicking , 1992 .

[26]  J. C. Slattery,et al.  Correlation for dynamic contact angle , 1979 .

[27]  Jean N. Koster,et al.  Low-Gravity Fluid Dynamics and Transport Phenomena , 1990 .