Model correlation and system health monitoring using frequency domain measurements

[1]  David C. Zimmerman,et al.  Correcting finite element models using a symmetric eigenstructure assignment technique , 1990 .

[2]  J. E. Brock.  Optimal matrices describing linear systems. , 1968 .

[3]  S. Smith,et al.  Expansion and orthogonalization of measured modes for structure identification , 1989 .

[4]  A. Berman,et al.  Improvement of a Large Analytical Model Using Test Data , 1983 .

[5]  David C. Zimmerman,et al.  Structural Damage Detection Using Frequency Response Functions , 1995 .

[6]  William P. Rodden,et al.  A method for deriving structural influence coefficients from ground vibration tests. , 1967 .

[7]  Daniel J. Inman,et al.  Matching Analytical Models with Experimental Modal Data in Mechanical Systems , 1990 .

[8]  John W. Wallace,et al.  Development of an experimental space station model for structural dynamics research , 1990 .

[9]  A. Kabe.  Stiffness matrix adjustment using mode data , 1985 .

[10]  F. Hemez,et al.  Updating finite element dynamic models using an element-by-element sensitivity methodology , 1993 .

[11]  S. Smith,et al.  SECANT-METHOD ADJUSTMENT FOR STRUCTURAL MODELS , 1989 .

[12]  Alex Berman,et al.  Theory of Incomplete Models of Dynamic Structures , 1971 .

[13]  D. Kammer.  Optimum approximation for residual stiffness in linear system identification , 1988 .

[14]  Mark Milman,et al.  Evaluation of Mode Shape Expansion Techiques on the Micro-Precision Interferometer Truss , 1994 .

[15]  Menahern Baruch,et al.  Optimal Weighted Orttiogonalization of Measured Modes , 1978 .

[16]  Mohamed Kaouk,et al.  Structural damage assessment using a generalized minimum rank perturbation theory , 1993 .