Free-flow isoelectric focusing microfluidic device with glass coating by sol–gel methods

Abstract A device for microfluidic free-flow isoelectric focusing (μ-FFIEF) was fabricated in a glass-coated PDMS structure. The microfluidic channel was made by a PDMS replica molding and standard soft photolithography technique. For the prefractionation and preconcentration of a protein mixture, we patterned palladium electrodes on the glass substrate and coated with TEOS–sol to enhance the bonding with PDMS. The PDMS microchannel was coated with glass by flushing TEOS–sol and annealing at 100 °C. The optimum focusing condition was obtained by pH indicator with ampholyte solution made with MES. Model proteins, RFP and EGFP, were successfully concentrated around 214 μm and 357 μm from the anode, respectively. The optimum focusing condition in the μ-FFIEF device was an electric potential of 1.5 V/cm and pH 6.0. The focusing time in the channel without glass coating was approximately 30 s, but the breakdown of the electrode by electrolysis started immediately when the electric field was applied. However, the glass-coated device was kept intact under continuous application of voltage giving a stable pH gradient, but with twice the focusing time.

[1]  S. Quake,et al.  From micro- to nanofabrication with soft materials. , 2000, Science.

[2]  D. Kohlheyer,et al.  Miniaturizing free‐flow electrophoresis – a critical review , 2008, Electrophoresis.

[3]  A. Manz,et al.  Micro total analysis systems. Latest advancements and trends. , 2006, Analytical chemistry.

[4]  Michael G. Roper,et al.  A fully integrated microfluidic genetic analysis system with sample-in–answer-out capability , 2006, Proceedings of the National Academy of Sciences.

[5]  Xuezhu Liu,et al.  Electrokinetically controlled DNA hybridization microfluidic chip enabling rapid target analysis. , 2004, Analytical chemistry.

[6]  C. Brinker,et al.  Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing , 1990 .

[7]  A. Abate,et al.  Glass coating for PDMS microfluidic channels by sol-gel methods. , 2008, Lab on a chip.

[8]  Klavs F Jensen,et al.  Micro freef‐low IEF enhanced by active cooling and functionalized gels , 2006, Electrophoresis.

[9]  J Michael Ramsey,et al.  Sample filtration, concentration, and separation integrated on microfluidic devices. , 2003, Analytical chemistry.

[10]  A Manz,et al.  Microfabricated devices for fluid mixing and their application for chemical synthesis. , 2001, Chemical record.

[11]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[12]  Andreas Manz,et al.  Electrostatic induction of the electric field into free-flow electrophoresis devices. , 2006, Lab on a chip.

[13]  J. Sambrook,et al.  Molecular Cloning: A Laboratory Manual , 2001 .

[14]  Samuel K Sia,et al.  Lab-on-a-chip devices for global health: past studies and future opportunities. , 2007, Lab on a chip.

[15]  A. Manz,et al.  Micro total analysis systems. 2. Analytical standard operations and applications. , 2002, Analytical chemistry.

[16]  A. Manz,et al.  Micro total analysis systems. 1. Introduction, theory, and technology. , 2002, Analytical chemistry.

[17]  D. Erickson,et al.  Integrated microfluidic devices , 2004 .

[18]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[19]  P Yager,et al.  Formation of natural pH gradients in a microfluidic device under flow conditions: model and experimental validation. , 2001, Analytical chemistry.

[20]  Zhao-Lun Fang,et al.  Integration of single cell injection, cell lysis, separation and detection of intracellular constituents on a microfluidic chip. , 2004, Lab on a chip.