Fiber Bragg Grating Probe for Relative Humidity and Respiratory Frequency Estimation: Assessment During Mechanical Ventilation

Fiber Bragg grating (FBG) sensors have gained popularity in medicine for some valuable features, such as small size, immunity to electromagnetic interferences, and good metrological properties. Among several applications, this technology has been used in the analysis of gases in mechanical ventilation. In this field, in particular during invasive ventilation, the gas delivered by the ventilator must be warmed and humidified in order to reach the patients with optimal conditions (100% of relative humidity and 37 °C). The most popular device used to accomplish this task is the heated wire humidifiers (HWHs). Unfortunately, their performances are influenced by ventilatory settings (e.g., respiratory frequency) and environmental conditions. The aim of this paper is to fabricate a probe based on an FBG sensor able to monitor both the gas relative humidity and the respiratory frequency. This information can be used as a feedback to improve the performance of the HWHs. The probe consists of a needle, which houses an FBG sensor coated by hygroscopic material (i.e., agar). This solution allows an easy insertion of the probe within the ducts connecting the ventilator to the patient. The proposed system has been assessed during mechanical ventilation at different respiratory frequencies. Future testing will be focused on the development of a system able to monitor other parameters that influence the HWHs performances (e.g., gas temperature and minute volume).

[1]  P. Rastogi,et al.  Relative humidity sensor with optical fiber Bragg gratings. , 2002, Optics letters.

[2]  E Schena,et al.  Mechanical ventilation with heated humidifiers: measurements of condensed water mass within the breathing circuit according to ventilatory settings. , 2013, Physiological measurement.

[3]  Emiliano Schena,et al.  Performances of heated wire humidifiers during adult mechanical ventilation: Estimation of the amount of condensation , 2016, 2016 IEEE International Symposium on Medical Measurements and Applications (MeMeA).

[4]  H. Fischer,et al.  Influence of mouth opening on oropharyngeal humidification and temperature in a bench model of neonatal continuous positive airway pressure. , 2017, Medical engineering & physics.

[5]  Elfed Lewis,et al.  Intra-Tissue Pressure Measurement in Ex Vivo Liver Undergoing Laser Ablation with Fiber-Optic Fabry-Perot Probe , 2016, Sensors.

[6]  T. L. Yeo,et al.  Fibre-optic sensor technologies for humidity and moisture measurement , 2008 .

[7]  T Mashimo,et al.  Performance of heated humidifiers with a heated wire according to ventilatory settings. , 2001, Journal of aerosol medicine : the official journal of the International Society for Aerosols in Medicine.

[8]  Paulo S. André,et al.  Optical Fiber Relative Humidity Sensor Based on a FBG with a Di-Ureasil Coating , 2012, Sensors.

[9]  Kefa Cen,et al.  Low-cost relative humidity sensor based on thermoplastic polyimide-coated fiber Bragg grating , 2007 .

[10]  Emiliano Schena,et al.  Fiber Bragg Grating Measuring System for Simultaneous Monitoring of Temperature and Humidity in Mechanical Ventilation , 2017, Sensors.

[11]  E Schena,et al.  A novel control strategy to improve the performances of heated wire humidifiers in artificial neonatal ventilation. , 2012, Physiological measurement.

[12]  Emiliano Schena,et al.  Optical Fiber-Based MR-Compatible Sensors for Medical Applications: An Overview , 2013, Sensors.

[13]  Sergio Silvestri,et al.  Performances of heated humidifiers in mechanical ventilation: A preliminary intra-breath analysis , 2013, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[14]  T. Erdogan.  Fiber grating spectra , 1997 .

[15]  S. James,et al.  Optical fibre long-period grating sensors: characteristics and application , 2003 .

[16]  Ned Djilali,et al.  Parametric study of a polymer-coated fibre-optic humidity sensor , 2012 .

[17]  Sergio Silvestri,et al.  Mathematical model and minimal measurement system for optimal control of heated humidifiers in neonatal ventilation. , 2010, Medical engineering & physics.

[18]  R. Branson.  The effects of inadequate humidity. , 1998, Respiratory care clinics of North America.

[19]  Sergio Silvestri,et al.  A transistor based air flow transducer for thermohygrometric control of neonatal ventilatory applications. , 2008, The Review of scientific instruments.

[20]  Sergio Silvestri,et al.  Measurement of condensed water mass during mechanical ventilation with heated wire humidifiers: Experiments with and without pre-warming , 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[21]  J. Covington,et al.  Humidification During Mechanical Ventilation , 1996 .

[22]  P. Pelosi,et al.  Performance of heated wire humidifiers: an in vitro study. , 2007, Journal of critical care.

[23]  François Lellouche,et al.  Influence of ambient and ventilator output temperatures on performance of heated-wire humidifiers. , 2004, American journal of respiratory and critical care medicine.

[24]  Byoungho Lee,et al.  Review of the present status of optical fiber sensors , 2003 .

[25]  Umesh Tiwari,et al.  Fiber grating sensors in medicine: Current and emerging applications , 2011 .

[26]  R. Branson,et al.  Is humidification always necessary during noninvasive ventilation in the hospital? , 2010, Respiratory care.

[27]  Kaiming Zhou,et al.  Toward a New Generation of Photonic Humidity Sensors , 2014, Sensors.

[28]  S. Korposh,et al.  Simultaneous temperature and humidity measurements in a mechanical ventilator using an optical fibre sensor , 2016, European Workshop on Optical Fibre Sensors.

[29]  Peng Zu,et al.  Humidity Sensor Based on a Multimode-Fiber Taper Coated With Polyvinyl Alcohol Interacting With a Fiber Bragg Grating , 2012, IEEE Sensors Journal.