Digital mapping of RUSLE slope length and steepness factor across New South Wales, Australia

The Universal Soil Loss Equation (USLE) and its main derivate, the Revised Universal Soil Loss Equation (RUSLE), are widely used in estimating hillslope erosion. The effects of topography on hillslope erosion are estimated through the product of slope length (L) and slope steepness (S) subfactors, or LS factor, which often contains the highest detail and plays the most influential role in RUSLE. However, current LS maps in New South Wales (NSW) are either incomplete (e.g. point-based) or too coarse (e.g. 250 m), limiting RUSLE-based applications. The aim of this study was to develop automated procedures in a geographic information system (GIS) to estimate and map the LS factor across NSW. The method was based on RUSLE specifications and it incorporated a variable cutoff slope angle, which improves the detection of the beginning and end of each slope length. An overland-flow length algorithm for L subfactor calculation was applied through iterative slope-length cumulation and maximum downhill slope angle. Automated GIS scripts have been developed for LS factor calculation so that the only required input data are digital elevation models (DEMs). Hydrologically corrected DEMs were used for LS factor calculation on a catchment basis, then merged to form a seamless LS-factor digital map for NSW with a spatial resolution ~30 m (or 1 s). The modelled LS values were compared with the reference LS values, and the coefficient of efficiency reached 0.97. The high-resolution digital LS map produced is now being used along with other RUSLE factors in hillslope erosion modelling and land-use planning at local and regional scales across NSW.

[1]  Gerard Govers,et al.  A GIS procedure for automatically calculating the USLE LS factor on topographically complex landscape units , 1996 .

[2]  Bernard A. Engel,et al.  Effect of Slope Prediction Methods on Slope and Erosion Estimates , 1991 .

[3]  Daniel C. Yoder,et al.  The future of RUSLE: Inside the new Revised Universal Soil Loss Equation , 1995 .

[4]  Ian P. Prosser,et al.  Modelling and testing spatially distributed sediment budgets to relate erosion processes to sediment yields , 2009, Environ. Model. Softw..

[5]  Bofu Yu,et al.  Modelling and mapping rainfall erosivity in New South Wales, Australia , 2015 .

[6]  John F. O'Callaghan,et al.  The extraction of drainage networks from digital elevation data , 1984, Comput. Vis. Graph. Image Process..

[7]  Andrew A. Millward,et al.  Adapting the RUSLE to model soil erosion potential in a mountainous tropical watershed , 1999 .

[8]  Carlos A. Bonilla,et al.  Water Erosion Prediction Using the Revised Universal Soil Loss Equation (RUSLE) in a GIS Framework, Central Chile , 2010 .

[9]  Robert J. Hickey,et al.  Computing the LS factor for the Revised Universal Soil Loss Equation through array-based slope processing of digital elevation data using a C++ executable , 2004, Comput. Geosci..

[10]  Filippos Vallianatos,et al.  Soil erosion prediction using the Revised Universal Soil Loss Equation (RUSLE) in a GIS framework, Chania, Northwestern Crete, Greece , 2009 .

[11]  Rui Li,et al.  Extension of a GIS procedure for calculating the RUSLE equation LS factor , 2013, Comput. Geosci..

[12]  R. Hickey,et al.  Slope Angle and Slope Length Solutions for GIS , 2000 .

[13]  K. Renard,et al.  USING GIS FOR FACILITATING EROSION ESTIMATION , 1999 .

[14]  Honglei Zhu,et al.  RUSLE applied in a GIS framework: Calculating the LS factor and deriving homogeneous patches for estimating soil loss , 2005, Int. J. Geogr. Inf. Sci..

[15]  D. Tarboton.  A new method for the determination of flow directions and upslope areas in grid digital elevation models , 1997 .

[16]  David G. Tarboton,et al.  Terrain Analysis Using Digital Elevation Models in Hydrology , 2003 .

[17]  C. K. Mutchler,et al.  Revised Slope Length Factor for the Universal Soil Loss Equation , 1989 .

[18]  K. R. Sekhar,et al.  Evaluation of sediment yield by using remote sensing and GIS: A case study from the Phulang Vagu watershed, Nizamabad District (AP), India , 2002 .

[19]  P. Kinnell.  Runoff dependent erosivity and slope length factors suitable for modelling annual erosion using the Universal Soil Loss Equation , 2007 .

[20]  J. Nash,et al.  River flow forecasting through conceptual models part I — A discussion of principles☆ , 1970 .

[21]  Monia Santini,et al.  Hydrogeomorphic properties of simulated drainage patterns using digital elevation models: the flat area issue / Propriétés hydro-géomorphologiques de réseaux de drainage simulés à partir de modèles numériques de terrain: la question des zones planes , 2008 .

[22]  Billy J. Barfield,et al.  Design Hydrology and Sedimentology for Small Catchments , 1994 .

[23]  R. Hickey,et al.  Slope length calculations from a DEM within ARC/INFO grid , 1994 .

[24]  I. D. Moore,et al.  Modelling Erosion and Deposition: Topographic Effects , 1986 .

[25]  Michael F. Hutchinson,et al.  A differential equation for specific catchment area , 2011 .

[26]  I. Moore,et al.  Physical basis of the length-slope factor in the universal soil loss equation , 1986 .

[27]  Chongfa Cai,et al.  Soil conservation planning at the small watershed level using RUSLE with GIS: a case study in the Three Gorge Area of China , 2004 .

[28]  I. Moore,et al.  Length-slope factors for the Revised Universal Soil Loss Equation: simplified method of estimation , 1992 .

[29]  R. Hickey,et al.  The effect of slope algorithms on slope estimates within a GIS , 1998 .

[30]  José Luis García Rodríguez,et al.  Estimation of Slope Length Value of RUSLE Factor L Using GIS , 2010 .

[31]  K. Beven,et al.  THE PREDICTION OF HILLSLOPE FLOW PATHS FOR DISTRIBUTED HYDROLOGICAL MODELLING USING DIGITAL TERRAIN MODELS , 1991 .

[32]  W. H. Wischmeier,et al.  Predicting rainfall erosion losses : a guide to conservation planning , 1978 .

[33]  Ian P. Prosser,et al.  Predicting sheetwash and rill erosion over the Australian continent , 2003 .

[34]  Bruce V. Taylor,et al.  Contested Country: Local and Regional Natural Resources Management in Australia , 2009 .

[35]  J. Gallant,et al.  A multiresolution index of valley bottom flatness for mapping depositional areas , 2003 .

[36]  Xihua Yang,et al.  Deriving RUSLE cover factor from time-series fractional vegetation cover for hillslope erosion modelling in New South Wales , 2014 .

[37]  M. Hutchinson.  A new procedure for gridding elevation and stream line data with automatic removal of spurious pits , 1989 .

[38]  G. R. Foster,et al.  Predicting soil erosion by water : a guide to conservation planning with the Revised Universal Soil Loss Equation (RUSLE) , 1997 .

[39]  R. Hickey,et al.  Estimating the LS Factor for RUSLE through Iterative Slope Length Processing of Digital Elevation Data within Arclnfo Grid , 2001 .

[40]  Raghavan Srinivasan,et al.  Extension and validation of a geographic information system-based method for calculating the Revised Universal Soil Loss Equation length-slope factor for erosion risk assessments in large watersheds , 2008, Journal of Soil and Water Conservation.

[41]  P. Kinnell.  Sediment delivery from hillslopes and the Universal Soil Loss Equation: some perceptions and misconceptions , 2008 .