Toward wireless Networked Control Systems: An experimental study on real-time communications in 802.11 WLANs

Networked control systems (NCSs) exploit a packet switching network to fulfill complex control tasks without cumbersome point-to-point wiring infrastructures. But their performances are greatly influenced by time-varying packet delays and losses due to the communication system. As a consequence, real time operating systems are usually employed at NCS nodes to timely serve events scheduled by control applications. So far NCS issues have been mainly investigated assuming a wired network infrastructure. Anyway the trend is toward wireless communications. For these reasons, this paper proposes a real-time communication architecture based on the leading wireless 802.11 technology and on the real-time networking framework RTnet. The QoS offered by the proposed system, in terms of packet loss ratio and end-to-end delay, has been experimentally evaluated by varying protocol parameters. Results show that a proper tuning of system parameters can ensure robust real-time wireless communications. Thus, the present work can be considered an important step toward the design of a wireless networked control system.

[1]  Won-jong Kim,et al.  Real-time operating environment for networked control systems , 2005, Proceedings of the 2005, American Control Conference, 2005..

[2]  Anthony Massa,et al.  Embedded Software Development with eCos , 2002 .

[3]  Jing Wu,et al.  Design of Networked Control Systems With Packet Dropouts , 2007, IEEE Transactions on Automatic Control.

[4]  Yuanqing Xia,et al.  Networked Predictive Control of Systems With Random Network Delays in Both Forward and Feedback Channels , 2007, IEEE Transactions on Industrial Electronics.

[5]  Dragan Nesic,et al.  Stability of Wireless and Wireline Networked Control Systems , 2007, IEEE Transactions on Automatic Control.

[6]  P. Gerum Xenomai-Implementing a RTOS emulation framework on GNU / Linux , 2022 .

[7]  Upkar Varshney,et al.  The Status and Future of 802.11-Based WLANs , 2003, Computer.

[8]  Bernardo Wagner,et al.  RTnet - a flexible hard real-time networking framework , 2005, 2005 IEEE Conference on Emerging Technologies and Factory Automation.

[9]  Christian Benvenuti Understanding Linux Network Internals , 2005 .

[10]  Christian Wietfeld,et al.  Multimedia over 802.15.4 and ZigBee Networks for Ambient Environment Control , 2007, 2007 IEEE 65th Vehicular Technology Conference - VTC2007-Spring.

[11]  Dawn M. Tilbury,et al.  The Emergence of Industrial Control Networks for Manufacturing Control, Diagnostics, and Safety Data , 2007, Proceedings of the IEEE.

[12]  Kun Ji,et al.  Real-time operating environment for networked control systems , 2005 .

[13]  Bruno Sinopoli,et al.  Foundations of Control and Estimation Over Lossy Networks , 2007, Proceedings of the IEEE.

[14]  Giorgio C. Buttazzo,et al.  Quality-of-Control Management in Overloaded Real-Time Systems , 2007, IEEE Transactions on Computers.

[15]  Till Straumann Open Source Real Time Operating Systems Overview , 2001, ArXiv.

[16]  Jean-Luc Dekeyser,et al.  Implementation of ARTiS, an Asymmetric Real-Time Extension of SMP Linux , 2004 .

[17]  Bernhard Walke,et al.  IEEE 802 Wireless Systems: Protocols, Multi-Hop Mesh / Relaying, Performance and Spectrum Coexistence , 2007 .

[18]  Robin J. Evans,et al.  Feedback Control Under Data Rate Constraints: An Overview , 2007, Proceedings of the IEEE.

[19]  Gianluca Cena,et al.  Evaluation of Response Times in Industrial WLANs , 2007, IEEE Transactions on Industrial Informatics.

[20]  João Pedro Hespanha,et al.  A Survey of Recent Results in Networked Control Systems , 2007, Proceedings of the IEEE.

[21]  Panos J. Antsaklis,et al.  Control and Communication Challenges in Networked Real-Time Systems , 2007, Proceedings of the IEEE.