Speed Control of the Surface-Mounted Permanent-Magnet Synchronous Motor Based on Takagi–Sugeno Fuzzy Models

The speed control of the surface-mounted permanent-magnet synchronous motor (SPMSM) based on Takagi-Sugeno (T-S) fuzzy models is designed and implemented in this paper. In motor drive speed control, proportional-integral controller is generally applied. However, the tracking performance and load regulation capability should be compromised in the designing process of the controller. This study develops a speed controller based on the T-S fuzzy model with good tracking ability and load variation regulation. First, the dynamic model of an SPMSM is demonstrated and the load torque variation is treated as disturbances. Accordingly, the speed control strategy is developed based on the T-S fuzzy model. The defuzzification process and parallel distributed compensation are introduced. The ability of disturbance suppression and the Lyapunov stability of this system are established and analyzed. The controller gains are obtained via the linear matrix inequality toolbox. The speed control and all essential procedures are realized by the microcontroller Renesas RX62T. The tracking performance and load regulation capability are verified by the experimental results.

[1]  Alexander G. Loukianov,et al.  Digital Sliding-Mode Sensorless Control for Surface-Mounted PMSM , 2014, IEEE Transactions on Industrial Informatics.

[2]  Charles Robert Koch,et al.  Flatness-Based Tracking of an Electromechanical Variable Valve Timing Actuator With Disturbance Observer Feedforward Compensation , 2008, IEEE Transactions on Control Systems Technology.

[3]  Paolo Mercorelli,et al.  A Two-Stage Sliding-Mode High-Gain Observer to Reduce Uncertainties and Disturbances Effects for Sensorless Control in Automotive Applications , 2015, IEEE Transactions on Industrial Electronics.

[4]  P. Mercorelli,et al.  Throttle valve control using an inverse local linear model tree based on a fuzzy neural network , 2008, 2008 7th IEEE International Conference on Cybernetic Intelligent Systems.

[5]  Seung-Ki Sul,et al.  A Nine-Phase Permanent-Magnet Motor Drive System for an Ultrahigh-Speed Elevator , 2012, IEEE Transactions on Industry Applications.

[6]  Bin Wu,et al.  Predictive Control of a Three-Level Boost Converter and an NPC Inverter for High-Power PMSG-Based Medium Voltage Wind Energy Conversion Systems , 2014, IEEE Transactions on Power Electronics.

[7]  Yuan-Chih Chang,et al.  Division-Summation Current Control and One-Cycle Voltage Regulation of the Surface-Mounted Permanent-Magnet Synchronous Generator , 2016, IEEE Transactions on Power Electronics.

[8]  Yen-Shin Lai,et al.  Integrated Inverter/Converter Circuit and Control Technique of Motor Drives With Dual-Mode Control for EV/HEV Applications , 2014, IEEE Transactions on Power Electronics.

[9]  Sangshin Kwak,et al.  Suboptimal Control Scheme Design for Interior Permanent-Magnet Synchronous Motors: An SDRE-Based Approach , 2014, IEEE Transactions on Power Electronics.

[10]  D. Ounnas,et al.  Tracking control for permanent magnet synchronous machine based on Takagi-Sugeno fuzzy models , 2013, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER).

[11]  M. Sanada,et al.  Control Method Suitable for Direct-Torque-Control-Based Motor Drive System Satisfying Voltage and Current Limitations , 2012, IEEE Transactions on Industry Applications.

[12]  I. Husain,et al.  Permanent Magnet Synchronous Motor Magnet Designs with Skewing for Torque Ripple and Cogging Torque Reduction , 2007 .

[13]  Maria Letizia Corradini,et al.  A Quasi-Sliding Mode Approach for Robust Control and Speed Estimation of PM Synchronous Motors , 2012, IEEE Transactions on Industrial Electronics.

[14]  M. García-Gracia,et al.  Novel modular and retractable permanent magnet motor/generator for flywheel applications with reduced iron losses in stand-by mode , 2014 .

[15]  Shihua Li,et al.  Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia , 2009, IEEE Transactions on Industrial Electronics.

[16]  K. Rajagopal,et al.  Permanent Magnet Synchronous Motor Drive Using Hybrid PI Speed Controller With Inherent and Noninherent Switching Functions , 2011, IEEE Transactions on Magnetics.

[17]  Tian-Hua Liu,et al.  Wide-range adjustable speed control method for dual-motor drive systems , 2014 .

[18]  Frede Blaabjerg,et al.  A Simple Startup Strategy Based on Current Regulation for Back-EMF-Based Sensorless Control of PMSM , 2012, IEEE Transactions on Power Electronics.

[19]  Kum-Kang Huh,et al.  Effect of number of layers on performance of fractional-slot concentrated-windings interior permanent magnet machines , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[20]  Shihua Li,et al.  Fuzzy Adaptive Internal Model Control Schemes for PMSM Speed-Regulation System , 2012, IEEE Transactions on Industrial Informatics.

[21]  Gianmario Pellegrino,et al.  Performance Comparison Between Surface-Mounted and Interior PM Motor Drives for Electric Vehicle Application , 2012, IEEE Transactions on Industrial Electronics.

[22]  Jinseok Hong,et al.  Charging Method for the Secondary Battery in Dual-Inverter Drive Systems for Electric Vehicles , 2015, IEEE Transactions on Power Electronics.

[23]  Ju Lee,et al.  Multiobjective Optimal Design for Interior Permanent Magnet Synchronous Motor , 2009 .

[24]  Kwang-Woon Lee,et al.  A Seamless Transition Control of Sensorless PMSM Compressor Drives for Improving Efficiency Based on a Dual-Mode Operation , 2015, IEEE Transactions on Power Electronics.