Nano-SiO2/fluorinated waterborne polyurethane nanocomposite adhesive for laminated films

[1]  T. Amornsakchai,et al.  Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: Part I. Properties and characterization of treated films , 2012 .

[2]  S. Nedev,et al.  Influence of gas media on the stability of corona charged polyethylenterephtalate films stored at low pressure , 2012, IEEE Transactions on Dielectrics and Electrical Insulation.

[3]  A. Abdul-kader,et al.  Improve the physical and chemical properties of biocompatible polymer material by MeV He ion beam , 2012 .

[4]  M. Mohseni,et al.  An attempt to quantitatively predict the interfacial adhesion of differently surface treated nanosilicas in a polyurethane coating matrix using tensile strength and DMTA analysis , 2012 .

[5]  J. Fraunhofer.  Adhesion and Cohesion , 2012 .

[6]  M. Mohseni,et al.  Investigating the effect of pH on the surface chemistry of an amino silane treated nano silica , 2011 .

[7]  Shiqiang Huang,et al.  Synthesis and characterization of bis‐triethoxysilane endcapped polyurethane/urea , 2011 .

[8]  Hyun‐Joong Kim,et al.  UV-curable low surface energy fluorinated polycarbonate-based polyurethane dispersion. , 2011, Journal of colloid and interface science.

[9]  T. Aminabhavi,et al.  Novel hyperbranched waterborne polyurethane‐urea/silica hybrid coatings and their characterizations , 2011 .

[10]  Wei Wei,et al.  Synthesis and properties of poly(acrylates-co-urethane) adhesives for low surface energy materials , 2011 .

[11]  Yiding Shen,et al.  Effect of nanosilica content on properties of polyurethane/silica hybrid emulsion and its films , 2011 .

[12]  M. Aznar,et al.  Composition of the adhesives used in food packaging multilayer materials and migration studies from packaging to food , 2011 .

[13]  Qiangxian Wu,et al.  Tough Thermoplastic Starch Modified with Polyurethane Microparticles: Effects of Molecular Weight of Soft Segments in Polyurethane , 2011 .

[14]  S. Mitra,et al.  Contact angle hysteresis of microbead suspensions. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[15]  J. Scala,et al.  Properties of clear polyurethane films modified with a fluoropolymer emulsion , 2010 .

[16]  Jingli Zhang,et al.  Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties , 2010 .

[17]  S. Kuberski,et al.  Chemical nature of adhesion: Plasma modified styrene–butadiene elastomer and polyurethane adhesive joints , 2010 .

[18]  Mehul A. Patel,et al.  Fatty acid modified polyurethane dispersion for surface coatings: Effect of fatty acid content and ionic content , 2010 .

[19]  J. Cauich‐Rodríguez,et al.  TGA/FTIR studies of segmented aliphatic polyurethanes and their nanocomposites prepared with commercial montmorillonites , 2009 .

[20]  J. Yeh,et al.  Preparation and properties of amino-terminated anionic waterborne-polyurethane–silica hybrid materials through a sol–gel process in the absence of an external catalyst , 2008 .

[21]  Lin Jiang,et al.  Polyurethaneurea aqueous dispersions prepared with diethyltoluenediamine as chain extender , 2007 .

[22]  Matthias Wessling,et al.  Tailoring surface properties for controlling droplet formation at microsieve membranes , 2007 .

[23]  M. Fuji,et al.  A novel surface designed technique to disperse silica nano particle into polymer , 2007 .

[24]  Xiaohong Li,et al.  Surface-modification in situ of nano-SiO2 and its structure and tribological properties , 2006 .

[25]  R. Tsai,et al.  Aqueous polyurethane dispersions derived from polycarbonatediols , 2004 .

[26]  J. Ilavsky,et al.  Effect of silica nanoparticles on morphology of segmented polyurethanes , 2004 .

[27]  Yongfa Zhu,et al.  Surface-modification of SiO2 nanoparticles with oleic acid , 2003 .

[28]  P. Baglioni,et al.  On the surface properties of waterborne fluorinated coating polymers , 2000 .

[29]  J. R. Laghari,et al.  Effects of multistress aging (radiation, thermal, electrical) on polypropylene , 1991 .

[30]  A. Hammoud,et al.  Characterization of electron-irradiated biaxially-oriented polypropylene films , 1988 .

[31]  M. Perlman,et al.  Chemical modification of near‐surface charge trapping in polymers , 1984 .

[32]  A. Hagfeldt,et al.  Advanced research trends in dye-sensitized solar cells , 2021, Journal of materials chemistry. A.

[33]  John Dwyer,et al.  Polymer degradation and stability , 2020, Polymer Science and Nanotechnology.

[34]  D. Mishra,et al.  Eco-economical polyurethane wood adhesives from cellulosic waste: Synthesis, characterization and adhesion study , 2010 .

[35]  P. Taberna,et al.  Engineering Aspects , 2019, Ozone in Water Treatment.

[36]  Stuart Croll,et al.  Progress in Organic Coatings , 2008 .

[37]  S. Bastide,et al.  Mechanical behaviour of polypropylene composites containing fine mineral filler: Effect of filler surface treatment , 1998 .

[38]  ScienceDirect,et al.  Composites science and technology , 1985 .

[39]  D. J. Alner.  Aspects of Adhesion , 1965 .

[40]  Journal of Applied Polymer Science , 1959, Nature.