Physicochemical, Water Vapor Barrier and Mechanical Properties of Corn Starch and Chitosan Composite Films

Biodegradable flexible films were developed from corn starch (CS) and chitosan (CH); their microstructure, mechanical and barrier properties were evaluated. Chitosan and starch blend filmogenic suspensions showed a pseudoplastic behavior, similar to that of chitosan solutions. Smooth surfaces, homogeneous and compact film structures were observed from microstructure studies using scanning electron microscopy (SEM). The addition of glycerol reduced film opacity and increased film solubility of both CS and composite CS-CH films. Water vapor permeability values of composite CS-CH films plasticized with glycerol ranged between 3.76 and 4.54 × 10 -11 g s -1 m -1 Pa -1 , lower than those of the single component films. CS-CH films were resistant and their flexibility increased with glycerol addition. Tensile strength values of CS-CH films were comparable to those of low-density and high-density polyethylenes but lower than that obtained for cellophane, however, composite biodegradable films showed lower elongation at break values than the synthetic commercial ones. In conclusion, CS-CH films can be described as biofilms with a homogeneous matrix, stable structure and interesting water barrier and mechanical properties, with great possibilities of utilization, and with the advantage of biodegradability.

[1]  F. Debeaufort,et al.  Methylcellulose-based edible films and coatings : 2. Mechanical and thermal properties as a function of plasticizer content , 1997 .

[2]  N. Zaritzky,et al.  Composite starch-based coatings applied to strawberries (Fragaria ananassa). , 2001, Die Nahrung.

[3]  Maolin Zhai,et al.  Study on antibacterial starch/chitosan blend film formed under the action of irradiation , 2004 .

[4]  T. McHugh,et al.  Plasticized Whey Protein Edible Films: Water Vapor Permeability Properties , 1994 .

[5]  J. Arul,et al.  Chitosan Coating Effect on Storability and Quality of Fresh Strawberries , 1991 .

[6]  J. Krochta,et al.  Color Stability of Edible Coatings During Prolonged Storage , 2000 .

[7]  Thomas H. Shellhammer,et al.  Whey protein emulsion film performance as affected by lipid type and amount , 1997 .

[8]  J. Sugiyama,et al.  Direct imaging of polysaccharide aggregates in frozen aqueous dilute systems , 1994 .

[9]  Maria Victória Eiras Grossmann,et al.  Mechanical and thermal properties of yam starch films , 2005 .

[10]  N. Gontard,et al.  Proteins as Agricultural Polymers for Packaging Production , 1998 .

[11]  N. Zaritzky,et al.  Characterization of composite hydrocolloid films , 2004 .

[12]  A. Deschamps,et al.  Edible Antimicrobial Films Based on Chitosan Matrix , 2002 .

[13]  Nathalie Gontard,et al.  Edible Wheat Gluten Films: Influence of the Main Process Variables on Film Properties using Response Surface Methodology , 1992 .

[14]  A. Ogale,et al.  Tensile Properties of Soy Protein Isolate Films Produced by a Thermal Compaction Technique , 2000 .

[15]  Curtis L. Weller,et al.  Permeability and Mechanical Properties of Cellulose‐Based Edible Films , 1993 .

[16]  S. Roller,et al.  The antifungal properties of chitosan in laboratory media and apple juice. , 1999, International journal of food microbiology.

[17]  J. M. Bunn,et al.  Mechanical and barrier properties of edible chitosan films as affected by composition and storage , 1996 .

[18]  M. N. R. Kumar.  A review of chitin and chitosan applications , 2000 .

[19]  George F. Fanta,et al.  Glycerol-plasticized films prepared from starch—poly(vinyl alcohol) mixtures: effect of poly(ethylene-co-acrylic acid)☆ , 1994 .

[20]  Meilin Yang,et al.  Relationships between the chain flexibilities of chitosan molecules and the physical properties of their casted films , 1994 .

[21]  Maria Victória Eiras Grossmann,et al.  Microstructural characterization of yam starch films , 2002 .

[22]  F. Shahidi,et al.  Food applications of chitin and chitosans , 1999 .

[23]  N. Zaritzky,et al.  Microstructural characterization of plasticized starch-based films , 2000 .

[24]  D. F. Parra,et al.  Mechanical properties and water vapor transmission in some blends of cassava starch edible films , 2004 .

[25]  B. Chiang,et al.  ANTIMICROBIAL AND PHYSICOCHEMICAL PROPERTIES OF METHYLCELLULOSE AND CHITOSAN FILMS CONTAINING A PRESERVATIVE , 1996 .

[26]  Athapol Noomhorm,et al.  Effect of Plasticizers on Mechanical and Barrier Properties of Rice Starch Film , 2004 .

[27]  J. Lawton.  Effect of starch type on the properties of starch containing films , 1996 .

[28]  J. Krochta,et al.  The gloss of edible coatings as affected by surfactants, lipids, relative humidity, and time , 2000 .

[29]  S. Grelier,et al.  Antimicrobial and physicochemical properties of chitosan-HPMC-based films. , 2004, Journal of agricultural and food chemistry.

[30]  Ioannis S. Arvanitoyannis,et al.  Biodegradable films made from low density polyethylene (LDPE), wheat starch and soluble starch for food packaging applications. Part 2 , 1997 .

[31]  M. Grossmann,et al.  Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect , 2005 .

[32]  H. No,et al.  Crawfish chitosan as a coagulant in recovery of organic compounds from seafood processing streams , 1989 .

[33]  Guy Della Valle,et al.  Influence of amylose content on starch films and foams , 1995 .

[34]  Milford A. Hanna,et al.  Chitosan-starch composite film: preparation and characterization , 2004 .