论文信息 - Pullout of Inclined Fibers from Cementitious Matrix - 字舞流文

Pullout of Inclined Fibers from Cementitious Matrix

Fibers with inclination angles of 0, 14, 27, and 37, respectively, were pulled out from a cementitious matrix. For each inclination angle, two types of specimens with 16 and eight steel fibers, res...

Surendra P. Shah | A. Pacios | C. Ouyang | C. Ouyang | A. Pacios

[1] R. J. Gray,et al. Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrix , 1984 .

[2] J. Morton,et al. The cracking of composites consisting of discontinuous ductile fibres in a brittle matrix — effect of fibre orientation , 1974 .

[3] Victor C. Li,et al. Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix , 1990 .

[4] R. J. Gray. Analysis of the effect of embedded fibre length on fibre debonding and pull-out from an elastic matrix , 1984 .

[5] Surendra P. Shah,et al. Pullout Problem: Stress versus Fracture Mechanical Approach , 1990 .

[6] S. Somayaji,et al. Bond Stress Versus Slip Relationship and Cracking Response of Tension Members , 1981 .

[7] Antoine E. Naaman,et al. Pull-Out Mechanism in Steel Fiber-Reinforced Concrete , 1976 .

[8] Barzin Mobasher,et al. Characterization of Interfacial Properties in Fiber‐Reinforced Cementitious Composites , 1991 .

[9] Surendra P. Shah,et al. Geometry‐Dependent R‐Curve for Quasi‐Brittle Materials , 1991 .

[10] A. M. Brandt. On the optimal direction of short metal fibres in brittle matrix composites , 1985 .