A review on fuel cell technologies and power electronic interface

The issue of renewable energy is becoming significant due to increasing power demand, instability of the rising oil prices and environmental problems. Among the various renewable energy sources, fuel cell is gaining more popularity due to their higher efficiency, cleanliness and cost-effective supply of power demanded by the consumers. This paper presents a comprehensive review of different fuel cell technologies with their working principle, advantages, disadvantages and suitability of applications for residential/grid-connected system, transportation, industries and commercial applications. Development of mathematical model of fuel cell required for simulation study is discussed. This paper also focuses on the necessity of a suitable power-conditioning unit required to interface the fuel cell system with standalone/grid applications.

[1]  M.H. Nehrir,et al.  Distributed Generation Applications of Fuel Cells , 2006, 2006 Power Systems Conference: Advanced Metering, Protection, Control, Communication, and Distributed Resources.

[2]  Douglas J. Nelson,et al.  Fuel cell systems: efficient, flexible energy conversion for the 21st century , 2001, Proc. IEEE.

[3]  M. Shannon,et al.  A silicon microfabricated direct formic acid fuel cell , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[4]  Rong-Jong Wai,et al.  High-efficiency fuel-cell power inverter with soft-switching resonant technique , 2005 .

[5]  Jih-Sheng Lai,et al.  Design considerations for a 48 V fuel cell to split single phase inverter system with ultracapacitor energy storage , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[6]  F.Z. Peng,et al.  Low cost fuel cell converter system for residential power generation , 2004, IEEE Transactions on Power Electronics.

[7]  Luciane Neves Canha,et al.  An electrochemical-based fuel-cell model suitable for electrical engineering automation approach , 2004, IEEE Transactions on Industrial Electronics.

[8]  S. Jain,et al.  Single Stage Power Electronic Interface for a Fuel Cell Based Power Supply System , 2007, 2007 IEEE Canada Electrical Power Conference.

[9]  K.E. Swider-Lyons,et al.  Technical issues and opportunities for fuel cell development for autonomous underwater vehicles , 2002, Proceedings of the 2002 Workshop on Autonomous Underwater Vehicles, 2002..

[10]  Roger C. Dugan,et al.  Distributed generation , 2002 .

[11]  Esam M.A. Hussein,et al.  Applications and design , 2004 .

[12]  Roger Dougal,et al.  Mathematical Model of a Direct Methanol Fuel Cell , 2004, 2003.04083.

[13]  P.N. Enjeti,et al.  Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[14]  R. Ramakumar,et al.  Distributed generation and renewable energy systems , 2002, IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002..

[15]  M.H. Nehrir,et al.  Comparison and Identification of Static Electrical Terminal Fuel Cell Models , 2007, IEEE Transactions on Energy Conversion.

[16]  M. Farooque,et al.  Fuel cells-the clean and efficient power generators , 2001, Proc. IEEE.

[17]  J.B. O'Sullivan.  Fuel cells in distributed generation , 1999, 1999 IEEE Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.99CH36364).

[18]  F. Z. Peng.  Editorial Special Issue on Distributed Power Generation , 2004 .

[19]  B. Cook,et al.  Introduction to fuel cells and hydrogen technology , 2002 .

[20]  D. Sutanto,et al.  Exploring the power conditioning system for fuel cell , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[21]  A.M. Khambadkone,et al.  Analysis and control of isolated current-fed full bridge converter in fuel cell system , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[22]  C. Bordons,et al.  Development and experimental validation of a PEM fuel cell dynamic model , 2007 .

[23]  Felix A. Farret,et al.  Optimal characteristics of fuel cell generating systems for utility distribution networks , 2002, IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002..

[24]  T. Jacobs,et al.  Suitability of Fuel Cell Technology for Electricity Utility Standby Power Applications , 2006, INTELEC 06 - Twenty-Eighth International Telecommunications Energy Conference.

[25]  Digby D. Macdonald,et al.  Electrochemical studies of sodium borohydride in alkaline aqueous solutions using a gold electrode , 2009 .

[26]  A. Boudghene Stambouli,et al.  Fuel cells, an alternative to standard sources of energy , 2002 .

[27]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[28]  J. Lutz,et al.  Modular converter for fuel cell systems with buffer storage , 2005, 2005 European Conference on Power Electronics and Applications.

[29]  P.N. Enjeti,et al.  A current-fed HF link direct DC/AC converter with active harmonic filter for fuel cell power systems , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[30]  M.G. Simoes,et al.  Sensitivity analysis of the modeling parameters used in Simulation of proton exchange membrane fuel cells , 2005, IEEE Transactions on Energy Conversion.

[31]  A. Miraoui,et al.  Polymer Electrolyte Fuel Cell System (PEFC) Performance Analysis , 2006, 2006 IEEE International Conference on Automation, Quality and Testing, Robotics.

[32]  S.M.T. Bathaee,et al.  A new dynamic model considering effects of temperature, pressure and internal resistance for PEM fuel cell power modules , 2008, 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.

[33]  Zhong Du,et al.  Optimum fuel cell utilization with multilevel inverters , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[34]  J. Meng,et al.  A distributed power generation communication system , 2003, CCECE 2003 - Canadian Conference on Electrical and Computer Engineering. Toward a Caring and Humane Technology (Cat. No.03CH37436).

[35]  Christophe Coutanceau,et al.  Life time test in direct borohydride fuel cell system , 2009 .

[36]  J.-S. Lai,et al.  A high-performance V6 converter for fuel cell power conditioning system , 2005, 2005 IEEE Vehicle Power and Propulsion Conference.

[37]  Xuhui Wen,et al.  Fuel cell power system and high power DC-DC converter , 2004 .

[38]  W.Grover Coors,et al.  Protonic ceramic fuel cells for high-efficiency operation with methane , 2003 .

[39]  L.M. Tolbert,et al.  Optimum fuel cell utilization with multilevel DC-DC converters , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[40]  Jin Jiang,et al.  Fuel Cell Technology for Distributed Generation: An Overview , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[41]  Chung-Yuen Won,et al.  Fuel Cell Generation System With a New Active Clamping Current-Fed Half-Bridge Converter , 2007, IEEE Transactions on Energy Conversion.

[42]  Prasad N. Enjeti,et al.  Design of a wide input range DC-DC converter with a robust power control scheme suitable for fuel cell power conversion , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[43]  T. Sakurai,et al.  Solid Oxide Fuel Cells as Promising Candidates for Distributed Generators , 2006, 2006 4th IEEE International Conference on Industrial Informatics.