The Precise Measurement of Current Ratios

The development of the current comparator, a three-winding current ratio transformer, is reviewed and its characteristics as an alternating current ratio standard are analyzed. Particular attention is given to the use of magnetic shielding and its effect on the accuracy and usefulness of the device. Some error characteristics of three types of audio-frequency current comparators are given and possible applications discussed. These include the calibration of current transformers and impedance comparisons. The adaptation of this device to dc operation is made possible by modulation techniques. A 20 000-ampere self-balancing direct current comparator, designed specifically for the calibration in situ of transductors or direct current transformers, is described. The application of this comparator to the calibration of shunts at high currents also is discussed and some results presented.

[1]  H. Schering,et al.  Eine einfache Methode zur Prüfung von Stromwandlern , 1914 .

[2]  F. C. Williams,et al.  The fundamental limitations of the second-harmonic type of magnetic modulator as applied to the amplification of small d.c. signals , 1950 .

[3]  A. M. Thompson.  The Precise Measuremient of Small Capacitances , 1958 .

[4]  F. K. Harris,et al.  New Apparatus at the National Bureau of Standards for Absolute Capacitance Measurement , 1958 .

[5]  N. L. Kusters,et al.  The Current Comparator and Its Application to the Absolute Calibration of Current Transformers , 1961, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[6]  D.L.H. Gibbings,et al.  An alternating-current analogue of the Kelvin double bridge , 1962 .

[7]  P. Miljanic,et al.  The development of the current comparator, a high-accuracy A-C ratio measuring device , 1962, Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics.

[8]  P. N. Miljanic,et al.  A current comparator for the precision measurement of D-C ratios , 1963, Electrical Engineering.

[9]  O. Petersons,et al.  A transformer-ratio-arm bridge for high-voltage capacitance measurements , 1963, Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics.

[10]  N. L. Kusters,et al.  Correction [to "The compensated current comparator; A new reference standard for current-transformer calibrations in industry"] , 1964 .