Structural Optimization of Steel Cantilever Used in Concrete Box Girder Bridge Widening

The structural optimization method of steel cantilever used in concrete box girder bridge widening is illustrated in this paper. The structural optimization method of steel cantilever incorporates the conceptual layout design of steel cantilever beam based on the topological theory and the determination of the optimal location of the transverse external prestressed tendons which connect the steel cantilever and the box girder. The optimal design theory and the analysis process are illustrated. The mechanical model for the prestressed steel cantilever is built and the analytical expression of the optimal position of the transverse external tendon is deduced. At last the effectiveness of this method is demonstrated by the design of steel cantilevers which are used to widen an existing bridge.

[1]  Reza Lotfi,et al.  Structural Topology Optimization: Moving Beyond Linear Elastic Design Objectives , 2012 .

[2]  Osvaldo M. Querin,et al.  Generation of strut-and-tie models by topology design using different material properties in tension and compression , 2011 .

[3]  Mitsuru Kitamura,et al.  Design methodology using topology optimization for anti-vibration reinforcement of generators in a ship’s engine room , 2016 .

[4]  Glaucio H. Paulino,et al.  Design of Structural Braced Frames Using Group Optimization , 2012 .

[5]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[6]  Martin P. Bendsøe,et al.  Optimization of Structural Topology, Shape, And Material , 1995 .

[7]  Matteo Bruggi,et al.  Design of the optimal fiber reinforcement for masonry structures via topology optimization , 2013 .

[8]  Vadims Goremikins,et al.  Topology Optimization of Cable Truss Web for Prestressed Suspension Bridge , 2013 .

[9]  Massimo Majowiecki.  The Free Form Design (FFD) in steel structural architecture – aesthetic values and reliability , 2008 .

[10]  Matteo Bruggi,et al.  Generating strut-and-tie patterns for reinforced concrete structures using topology optimization , 2009 .

[11]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[12]  Glaucio H. Paulino,et al.  Application of layout and topology optimization using pattern gradation for the conceptual design of buildings , 2011 .

[13]  Enrico Mazzarolo,et al.  Application of Topological Optimization to Bridge Design , 2013 .

[14]  Matteo Bruggi,et al.  Simple topology optimization strategy for the FRP reinforcement of masonry walls in two-way bending , 2014 .

[15]  Sigrid Adriaenssens,et al.  STRUCTURAL OPTIMIZATION OF A THIN-SHELL BRIDGE STRUCTURE , 2010 .

[16]  Hong Guan,et al.  Bridge topology optimisation with stress, displacement and frequency constraints , 2003 .

[17]  Qian Wang,et al.  Orthotropic Steel Cantilever Widening Method of Concrete Box Girder , 2011 .

[18]  W. Marsden.  I and J , 2012 .

[19]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[20]  Matteo Bruggi,et al.  On the Automatic Generation of Strut and Tie Patterns under Multiple Load Cases with Application to the Aseismic Design of Concrete Structures , 2010 .

[21]  Y. Xie,et al.  Computational efficiency and validation of bi-directional evolutionary structural optimisation , 2000 .

[22]  Feng Fan,et al.  Failure mechanisms of single-layer reticulated domes subjected to earthquakes , 2007 .

[23]  Matteo Bruggi,et al.  Topology optimization of the fiber-reinforcement retrofitting existing structures , 2013 .

[24]  Y. Xie,et al.  Topology optimization of nonlinear structures under displacement loading , 2008 .

[25]  Ole Sigmund,et al.  A 99 line topology optimization code written in Matlab , 2001 .

[26]  Ole Sigmund,et al.  Topology optimization by distribution of isotropic material , 2004 .

[27]  Zhengdong Huang,et al.  The SIMP-SRV Method for Stiffness Topology Optimization of Continuum Structures , 2007 .

[28]  Glaucio H. Paulino,et al.  Connecting architecture and engineering through structural topology optimization , 2014 .

[29]  Yang Yang,et al.  Three-Dimensional Force Flow Paths and Reinforcement Design in Concrete via Stress-Dependent Truss-Continuum Topology Optimization , 2015 .

[30]  Y. Xie,et al.  Bidirectional Evolutionary Method for Stiffness Optimization , 1999 .

[31]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[32]  G. Rozvany.  Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics , 2001 .

[33]  H. Mlejnek,et al.  An engineer's approach to optimal material distribution and shape finding , 1993 .