Enhancement of high temperature performance of cement blocks via CO2 curing.

Carbonation for the curing of cement-based materials has been gaining increased attention in recent years, especially in light of emerging initiatives to reduce carbon dioxide (CO2) emissions. Carbonation method or CO2 curing is founded on the basis of the reaction between CO2 and cement products to form thermally stable and denser carbonate, which not only improves the physical and mechanical properties of cement-based materials, but also has the ability to utilize and store CO2 safely and permanently. This study aims to assess the effect of CO2 curing technology on the high-temperatures performance of cement blocks. Upon molding, dry-mix cement blocks were cured under statically accelerated carbonation condition (20% CO2 concentration with 70% relative humidity) for 28 days, followed by exposure to elevated temperatures of 300 °C to 800 °C in order to comprehensively study the principal phase changes and decompositions of cement hydrates. The results indicated that CO2 curing improved the performance of cement blocks, such as enhancement in the residual compressive strength and reducing the sorptivity. At 600 °C, the scanning electron microscopy (SEM) revealed a denser microstructure while thermal analisis and X-ray diffraction (XRD) analysis also clearly demonstrated that higher amounts of calcium carbonate were present in the cement blocks after CO2 curing, suggesting better high-temperature performance compared to natural cured cement blocks. In general, an improved high-temperature performance, specifically at 600 °C of the dry-mixed cement blocks was demonstrated by adopting the CO2 curing technology. This confirms the potential of utilizing CO2 curing technology in not only improving quality of cement blocks, new avenue for storing of CO2 in construction material can be realized at the same time.

[1]  Daniel C W Tsang,et al.  Green remediation of As and Pb contaminated soil using cement-free clay-based stabilization/solidification. , 2019, Environment international.

[2]  N. Hewitt,et al.  Technical and environmental study of calcium carbonate looping versus oxy-fuel options for low CO2 emission cement plants , 2018, International Journal of Greenhouse Gas Control.

[3]  J. Blais,et al.  Valorization of waste concrete through CO2 mineral carbonation: Optimizing parameters and improving reactivity using concrete separation , 2017 .

[4]  Mohd Zamin Jumaat,et al.  Green concrete partially comprised of farming waste residues: a review , 2016 .

[5]  Chi Sun Poon,et al.  Impact of high temperature on PFA concrete , 2001 .

[6]  S. Pan,et al.  Advances in state-of-art valorization technologies for captured CO2 toward sustainable carbon cycle , 2018 .

[7]  Ahmad Baroutaji,et al.  Outlook of carbon capture technology and challenges. , 2019, The Science of the total environment.

[8]  C. Poon,et al.  Use of a CO2 curing step to improve the properties of concrete prepared with recycled aggregates , 2014 .

[9]  C. Shi,et al.  Effect of Limestone Powder Content on the Early-Age Properties of CO2-Cured Concrete , 2018, Journal of Materials in Civil Engineering.

[10]  Chi Sun Poon,et al.  Influence of recycled glass content and curing conditions on the properties of self-compacting concrete after exposure to elevated temperatures , 2012 .

[11]  Tamaryn Napp,et al.  CCS from industrial sources , 2012 .

[12]  C. Poon,et al.  Materials characteristics affecting CO2 curing of concrete blocks containing recycled aggregates , 2016 .

[13]  Daniel C W Tsang,et al.  Sustainable stabilization/solidification of municipal solid waste incinerator fly ash by incorporation of green materials , 2019, Journal of Cleaner Production.

[14]  Shashank Bishnoi,et al.  Changes in microstructure characteristics of cement paste on carbonation , 2018, Cement and Concrete Research.

[15]  Lanh Si Ho,et al.  Effect of internal water content on carbonation progress in cement-treated sand and effect of carbonation on compressive strength , 2018 .

[16]  Duo Zhang,et al.  Review on carbonation curing of cement-based materials , 2017 .

[17]  Ján Jerga.  Physico-mechanical properties of carbonated concrete , 2004 .

[18]  Sébastien Remond,et al.  Self-consolidating concrete subjected to high temperature: Mechanical and physicochemical properties , 2009 .

[19]  G. Peng,et al.  Change in microstructure of hardened cement paste subjected to elevated temperatures , 2008 .

[20]  C. Alonso,et al.  Dehydration and rehydration processes of cement paste exposed to high temperature environments , 2004 .

[21]  Li Gao,et al.  Analysis on differences of carbon dioxide emission from cement production and their major determinants , 2015 .

[22]  Marta Castellote,et al.  Chemical changes and phase analysis of OPC pastes carbonated at different CO2 concentrations , 2009 .

[23]  Chi Sun Poon,et al.  Effects of recycled glass on properties of architectural mortar before and after exposure to elevated temperatures , 2015 .

[24]  Chi Sun Poon,et al.  Experimental study on CO2 curing for enhancement of recycled aggregate properties , 2014 .

[25]  J. Sanjayan,et al.  Green house gas emissions due to concrete manufacture , 2007 .

[26]  Jean-Christophe Mindeguia,et al.  Temperature, Pore Pressure and Mass Variation of Concrete Subjected to High Temperature -- Experimental and Numerical Discussion on Spalling Risk , 2010 .

[27]  S. Simons,et al.  A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO2. , 2004, Journal of hazardous materials.

[28]  C. Poon,et al.  Effect of curing parameters on CO2 curing of concrete blocks containing recycled aggregates , 2016 .

[29]  E. Kakaras,et al.  The CO2 economy: Review of CO2 capture and reuse technologies , 2018 .

[30]  Nilay Shah,et al.  A techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources. , 2017 .

[31]  Zaid Ghouleh,et al.  Production of carbonate aggregates using steel slag and carbon dioxide for carbon-negative concrete , 2017 .

[32]  Ali Akhtar,et al.  Novel biochar-concrete composites: Manufacturing, characterization and evaluation of the mechanical properties. , 2018, The Science of the total environment.

[33]  Tung-Chai Ling,et al.  Potential of CO2 sequestration through construction and demolition (C&D) waste—An overview , 2017 .

[34]  Lei Wang,et al.  Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards , 2016 .

[35]  Caijun Shi,et al.  Effect of pre-conditioning on CO2 curing of lightweight concrete blocks mixtures , 2012 .

[36]  Chi Sun Poon,et al.  Recycling contaminated wood into eco-friendly particleboard using green cement and carbon dioxide curing , 2016 .

[37]  Kuang Cen,et al.  Empirical assessing cement CO2 emissions based on China's economic and social development during 2001-2030. , 2019, The Science of the total environment.

[38]  Tung-Chai Ling,et al.  Recycling of wastes for value-added applications in concrete blocks: An overview , 2018, Resources, Conservation and Recycling.

[39]  Zhao Xiao,et al.  Properties of partition wall blocks prepared with high percentages of recycled clay brick after exposure to elevated temperatures , 2013 .

[40]  Chi Sun Poon,et al.  CO2 curing for improving the properties of concrete blocks containing recycled aggregates , 2013 .