Effects of different processing conditions on super-elasticity and low modulus properties of metastable β-type Ti-35Nb-2Ta-3Zr alloy

[1]  Guanghui Cao,et al.  Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition , 2016 .

[2]  M. Ma,et al.  Development of a new β Ti alloy with low modulus and favorable plasticity for implant material. , 2016, Materials science & engineering. C, Materials for biological applications.

[3]  Lai‐Chang Zhang,et al.  Influence of Nb on the β→α″ martensitic phase transformation and properties of the newly designed Ti-Fe-Nb alloys. , 2016, Materials science & engineering. C, Materials for biological applications.

[4]  R. Pippan,et al.  Microstructure and metallic ion release of pure titanium and Ti–13Nb–13Zr alloy processed by high pressure torsion , 2016 .

[5]  A. Nouri,et al.  Mechanical properties and microstructure of powder metallurgy Ti–xNb–yMo alloys for implant materials , 2015 .

[6]  Peizhen Li,et al.  Spherical indentation of NiTi-based shape memory alloys , 2015 .

[7]  Xiao‐nong Cheng,et al.  A metastable β-type Ti–Nb binary alloy with low modulus and high strength , 2015 .

[8]  Lai‐Chang Zhang,et al.  Processing and properties of topologically optimised biomedical Ti-24Nb-4Zr-8Sn scaffolds manufactured by selective laser melting , 2015 .

[9]  O. Florêncio,et al.  Influence of phase transformations on dynamical elastic modulus and anelasticity of beta Ti-Nb-Fe alloys for biomedical applications. , 2015, Journal of the mechanical behavior of biomedical materials.

[10]  Feng Lin,et al.  Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder , 2015 .

[11]  T. Ebel,et al.  Metallurgical and mechanical properties of Ti–24Nb–4Zr–8Sn alloy fabricated by metal injection molding , 2014 .

[12]  Xinqing Zhao,et al.  A β-type TiNbZr alloy with low modulus and high strength for biomedical applications , 2014 .

[13]  Mariana Calin,et al.  Manufacture by selective laser melting and mechanical behavior of commercially pure titanium , 2014 .

[14]  H. Ogi,et al.  Elastic properties of single-crystalline ω phase in titanium , 2013 .

[15]  Yang Ren,et al.  Evolution of lattice strain and phase transformation of β III Ti alloy during room temperature cyclic tension , 2013 .

[16]  S. Semboshi,et al.  Mechanical properties and microstructures of β Ti-25Nb-11Sn ternary alloy for biomedical applications. , 2013, Materials science & engineering. C, Materials for biological applications.

[17]  Xinqing Zhao,et al.  Suppression of isothermal ω phase by dislocation tangles and grain boundaries in metastable β-type titanium alloys , 2013 .

[18]  Y. H. Li,et al.  Ultrafine-grained Ti-based composites with high strength and low modulus fabricated by spark plasma sintering , 2013 .

[19]  Young‐kook Lee,et al.  Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations , 2012 .

[20]  Singon Kang,et al.  Fine-grained structure fabricated by strain-induced martensite and its reverse transformations in a metastable β titanium alloy , 2011 .

[21]  Hsueh-Chuan Hsu,et al.  Structure and mechanical properties of as-cast Ti-5Nb-xFe alloys , 2010 .

[22]  Xian-Jin Yang,et al.  Preparation of bone-like apatite coating on surface of Ti-25Nb-2Zr alloy by biomimetic growth method , 2009 .

[23]  Z. Di,et al.  Microstructure and Mechanical Properties of TiNbZr Alloy during Cold Drawing , 2009 .

[24]  Hsueh-Chuan Hsu,et al.  Mechanical properties and deformation behavior of Ti-5Cr-xFe alloys , 2009 .

[25]  Di Zhang,et al.  Influence of cold deformation on martensite transformation and mechanical properties of Ti–Nb–Ta–Zr alloy , 2009 .

[26]  M. Jackson,et al.  On the mechanism of superelasticity in Gum metal , 2009 .

[27]  Xiaohua Cao,et al.  Nanoscale indentation behavior of pseudo-elastic Ti–Ni thin films , 2008 .

[28]  T. Cui,et al.  Fatigue properties of a metastable beta-type titanium alloy with reversible phase transformation. , 2008, Acta biomaterialia.

[29]  M. Morinaga,et al.  Phase stability change with Zr content in β-type Ti–Nb alloys , 2007 .

[30]  Sadao Watanabe,et al.  Beta TiNbSn Alloys with Low Young's Modulus and High Strength , 2005 .

[31]  L. Allard,et al.  Phase transformations in Ti–35Nb–7Zr–5Ta–(0.06–0.68)O alloys , 2005 .

[32]  C. M. Neto,et al.  Study of nontoxic aluminum and vanadium-free titanium alloys for biomedical applications , 2004 .

[33]  Taketo Sakuma,et al.  Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism , 2003, Science.

[34]  Mitsuo Niinomi,et al.  Recent research and development in titanium alloys for biomedical applications and healthcare goods , 2003 .

[35]  Rui Yang,et al.  Young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr in relation to α″ martensite , 2002 .

[36]  Mitsuo Niinomi,et al.  Mechanical properties of biomedical titanium alloys , 1998 .

[37]  Kathy K. Wang.  The use of titanium for medical applications in the USA , 1996 .

[38]  T. Nakano,et al.  ω Transformation in cold-worked Ti–Nb–Ta–Zr–O alloys with low body-centered cubic phase stability and its correlation with their elastic properties , 2013 .