Investigation of rheological behavior for commercial mold slags

[1]  Qiangqiang Wang,et al.  Effects of Transition Metal Oxides ZrO2, Y2O3, and Sc2O3 on Radiative Heat Transfer of Low-Reactive CaO-Al2O3-Based Mold Slag , 2020, Metallurgical and Materials Transactions B.

[2]  M. Afrand,et al.  Mixed convection of non-Newtonian nanofluid in an H-shaped cavity with cooler and heater cylinders filled by a porous material: Two phase approach , 2019, Advanced Powder Technology.

[3]  Qiangqiang Wang,et al.  Effect of substituting Na2O for SiO2 on the non-isothermal crystallization behavior of CaO-BaO-Al2O3 based mold fluxes for casting high Al steels , 2019, Ceramics International.

[4]  Qiangqiang Wang,et al.  Wetting and Erosion of ZrO2-Graphite Refractory by CaO-SiO2 and CaO-Al2O3-Based Mold Slags for Submerged Entry Nozzle , 2019, Metallurgical and Materials Transactions B.

[5]  Qiangqiang Wang,et al.  Study of Non-Newtonian Behavior of CaO-SiO2-Based Mold Slag and Its Effect on Lubrication in Continuous Casting of Steel , 2019, Metallurgical and Materials Transactions B.

[6]  Hamid Maleki,et al.  Flow and heat transfer in non-Newtonian nanofluids over porous surfaces , 2018, Journal of Thermal Analysis and Calorimetry.

[7]  Q. Wang,et al.  Study of the Mechanism of Liquid Slag Infiltration for Lubrication in Slab Continuous Casting , 2018, Metallurgical and Materials Transactions B.

[8]  Omid Ali Akbari,et al.  Simultaneous investigations the effects of non-Newtonian nanofluid flow in different volume fractions of solid nanoparticles with slip and no-slip boundary conditions , 2018 .

[9]  Omid Ali Akbari,et al.  Increasing heat transfer of non-Newtonian nanofluid in rectangular microchannel with triangular ribs , 2017 .

[10]  K. Mills,et al.  The Casting Powders Book , 2017 .

[11]  Omid Ali Akbari,et al.  The effect of velocity and dimension of solid nanoparticles on heat transfer in non-Newtonian nanofluid , 2017 .

[12]  J. Park,et al.  Thermo-Physical Properties of B2O3-Containing Mold Flux for High Carbon Steels in Thin Slab Continuous Casters: Structure, Viscosity, Crystallization, and Wettability , 2016, Metallurgical and Materials Transactions B.

[13]  K. Mills.  Structure and Properties of Slags Used in the Continuous Casting of Steel: Part 1 Conventional Mould Powders , 2016 .

[14]  D. Xiao,et al.  A Review of Mold Flux Development for the Casting of High-Al Steels , 2016, Metallurgical and Materials Transactions B.

[15]  Seon-hyo Kim,et al.  Controlling shear thinning property of lime silica based mold flux system with borate additive at 1623 K , 2015 .

[16]  Seon-hyo Kim,et al.  Controlling the shear thinning property of calcium silicate melts by addition of Si3N4 , 2015 .

[17]  K. Chou,et al.  Viscosity of CaO-MgO-Al2O3-SiO2-TiO2 Melts Containing TiC Particles , 2015, Metallurgical and Materials Transactions B.

[18]  Seon-hyo Kim,et al.  Shear Thinning Behavior of Calcium Silicate-Based Mold Fluxes at 1623 K , 2014 .

[19]  Watanabe Keiji,et al.  Development of New Mold Flux for Continuous Casting Based on Non-Newtonian Fluid Properties , 2014 .

[20]  A. Yamanaka,et al.  Influence of Mold Flux on Initial Solidification of Hypo-Peritectic Steel in a Continuous Casting Mold , 2012 .

[21]  M. Hayashi,et al.  Mechanism of Heat Transfer Reduction by Crystallization of Mold Flux for Continuous Casting , 2008 .

[22]  S. Raposo,et al.  Rheology and Shear Stress of Centaurea calcitrapa Cell Suspension Cultures Grown in Bioreactor , 2006, Biotechnology Letters.

[23]  Brian G. Thomas,et al.  Modeling transient slag-layer phenomena in the shell/mold gap in continuous casting of steel , 2003 .

[24]  R. Gupta,et al.  Polymer and Composite Rheology , 2000 .

[25]  M. J. Richardson,et al.  Thermal properties of slag films taken from the continuous casting mould. , 1994 .

[26]  A. Yamauchi,et al.  Heat Transfer between Mold and Strand through Mold Flux Film in Continuous Casting of Steel , 1993 .

[27]  S. N. Singh,et al.  Heat transfer and skin formation in a continuous-casting mold as a function of steel carbon content , 1974 .