Test plan for the irradiation of nonmetallic materials.
暂无分享,去创建一个
Cathy Ottinger Farnum | T. J. Venetz | Laurence H. Brush | L. H. Brush | M. Dahl | C. C. Joslyn | C. Farnum | M. Dahl | C. Joslyn | T. Venetz
[1] F. J. Wyant,et al. Capabilities and diagnostics of the Sandia Pelletron-raster system , 1984 .
[2] Kenneth T. Gillen,et al. A kinetic model for predicting oxidative degradation rates in combined radiation‐thermal environments , 1985 .
[3] S. G. Burnay,et al. Prediction of service lifetimes of elastomeric seals during radiation ageing , 1985 .
[4] Hans Wilski,et al. The radiation induced degradation of polymers , 1987 .
[5] K. Gillen,et al. Time-temperature-dose rate superposition: A methodology for extrapolating accelerated radiation aging data to low dose rate conditions , 1989 .
[6] Shalaby W. Shalaby,et al. Radiation effects on polymers , 1991 .
[7] K. T. Gillen,et al. Explanation of enhanced mechanical degradation rate for radiation- aged polyolefins as the aging temperature is decreased , 1994 .
[8] Kenneth T. Gillen,et al. Time development of diffusion-limited oxidation profiles in a radiation environment , 1997 .
[9] K. T. Gillen,et al. Evidence that Arrhenius high-temperature aging behavior for an EPDM o-ring does not extrapolate to lower temperatures , 1997 .
[10] M. Avalos-Borja,et al. Crosslinking of recycled polyethylene by gamma and electron beam irradiation , 1998 .
[11] Michael R. Keenan,et al. Better Methods for Predicting Lifetimes of Seal Materials , 1999 .
[12] Kenneth T. Gillen,et al. Lifetime Predictions for Elastomers from Accelerated Aging Experiments , 2000 .
[13] Paul J. Nigrey. Response of ethylene propylene diene monomer rubber (EPDM) to simulant Hanford tank waste , 2000 .
[14] D. Wright. Failure of Plastics and Rubber Products: Causes, Effects and Case Studies Involving Degradation , 2001 .
[15] Edgar C. Buck,et al. Hanford Waste Physical and Rheological Properties: Data and Gaps , 2011 .