Effects of injection timing and rail pressure on combustion characteristics and cyclic variations of a common rail DI engine fuelled with F-T diesel synthesized from coal
暂无分享,去创建一个
Hao Chen | L. Geng | Yuantao Xie | Yonggang Xiao | Shijie Li | Xubo Chen
[1] Fushui Liu,et al. The Optical Investigation on Initial Flame Developing Characteristics of Diesel Jet under Cold Start Conditions , 2021 .
[2] L. Geng,et al. Effect of the injection pressure and orifice diameter on the spray characteristics of biodiesel , 2020, Journal of Traffic and Transportation Engineering (English Edition).
[3] V. Soloiu,et al. Fischer-Tropsch coal-to-liquid fuel negative temperature coefficient region (NTC) and low-temperature heat release (LTHR) in a constant volume combustion chamber (CVCC) , 2020 .
[4] V. Karthickeyan,et al. Experimental investigation on pumpkin seed oil methyl ester blend in diesel engine with various injection pressure, injection timing and compression ratio , 2020 .
[5] Jingjing He,et al. Improved combustion and emission characteristics of ethylene glycol/diesel dual-fuel engine by port injection timing and direct injection timing , 2020 .
[6] A. Emiroğlu. Effect of fuel injection pressure on the characteristics of single cylinder diesel engine powered by butanol-diesel blend , 2019, Fuel.
[7] Mingrui Wei,et al. Effects of gasoline and iso-butanol addition on combustion and pollutant emissions of a common-rail diesel engine at different injection timing , 2019, Fuel.
[8] M. Jia,et al. Experimental study on the influence of low-temperature combustion (LTC) mode and fuel properties on cyclic variations in a compression-ignition engine , 2019, Fuel.
[9] C. Lee,et al. The experimental investigation on the impact of toluene addition on low-temperature ignition characteristics of diesel spray , 2019, Fuel.
[10] C. Lee,et al. Optical diagnostics of low-temperature ignition and combustion characteristics of diesel/kerosene blends under cold-start conditions , 2019, Applied Energy.
[11] C. Lee,et al. Numerical simulation of the influence of fuel temperature and injection parameters on biodiesel spray characteristics , 2019, Energy Science & Engineering.
[12] Zhongjie Zhang,et al. Comparison of combustion and emission characteristics of a diesel engine fueled with diesel and methanol-Fischer-Tropsch diesel-biodiesel-diesel blends at various altitudes , 2019, Fuel.
[13] Neven Duić,et al. Experimental and numerical investigation of injection timing and rail pressure impact on combustion characteristics of a diesel engine , 2019, Energy Conversion and Management.
[14] Hao Chen,et al. Effects of gasoline and polyoxymethylene dimethyl ethers blending in diesel on the combustion and emission of a common rail diesel engine , 2019, Energy.
[15] Yanjun Dai,et al. Thermodynamic analysis and optimization of a balanced-type single-stage NH3-H2O absorption-resorption heat pump cycle for residential heating application , 2019, Energy.
[16] Maosheng Duan,et al. Learning rates and cost reduction potential of indirect coal-to-liquid technology coupled with CO2 capture , 2018, Energy.
[17] Jinhong Shi,et al. Vibration Characteristics of Compression Ignition Engines Fueled with Blended Petro-Diesel and Fischer-Tropsch Diesel Fuel from Coal Fuels , 2018, Energies.
[18] Hao Chen,et al. NOx emission of biodiesel compared to diesel: Higher or lower? , 2018, Applied Thermal Engineering.
[19] A. P. Sathiyagnanam,et al. Combined influence of injection timing and EGR on combustion, performance and emissions of DI diesel engine fueled with neat waste plastic oil , 2018 .
[20] Li Zhou,et al. Exergy and economic analyses of indirect coal-to-liquid technology coupling carbon capture and storage , 2018 .
[21] P. Mohamed Shameer,et al. Assessment on the consequences of injection timing and injection pressure on combustion characteristics of sustainable biodiesel fuelled engine , 2018 .
[22] Mingrui Wei,et al. Effects of injection timing on combustion and emissions in a diesel engine fueled with 2,5-dimethylfuran-diesel blends , 2017 .
[23] Y. Pei,et al. Investigation on the spray development, the combustion characteristics and the emissions of Fischer–Tropsch fuel and diesel fuel from direct coal liquefaction , 2017 .
[24] Jae-Ho Kim,et al. Fischer–tropsch diesel production and evaluation as alternative automotive fuel in pilot-scale integrated biomass-to-liquid process , 2016 .
[25] Konstantinos Boulouchos,et al. Cycle-to-cycle variations in diesel engines , 2016 .
[26] S. Murugan,et al. Combustion, performance and emission characteristics of a DI diesel engine fuelled with non-petroleum fuel: A study on the role of fuel injection timing , 2015 .
[27] G. Sankaranarayanan,et al. Green technology effect of injection pressure, timing and compression ratio in constant pressure heat addition cycle by an eco-friendly material. , 2015, Ecotoxicology and Environmental Safety.
[28] Jing Li,et al. Effects of fuel ratio and injection timing on gasoline/biodiesel fueled RCCI engine: A modeling study , 2015 .
[29] Rajendran Silambarasan,et al. Influence of injection timing and compression ratio on performance, emission and combustion characteristics of Annona methyl ester operated diesel engine , 2015 .
[30] Avinash Kumar Agarwal,et al. Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics , 2015 .
[31] Anren Yao,et al. Effects of diesel injection pressure on the performance and emissions of a HD common-rail diesel engine fueled with diesel/methanol dual fuel , 2015 .
[32] Kyunghyun Ryu. Effects of pilot injection timing on the combustion and emissions characteristics in a diesel engine using biodiesel–CNG dual fuel , 2013 .
[33] A. Dhar,et al. Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine , 2013 .
[34] Li Zhou,et al. Simulation and Economic Analysis of Indirect Coal-to-Liquid Technology Coupling Carbon Capture and Storage , 2013 .
[35] Wang Heng. Combustion Characteristic of Turbocharged and Intercooled Diesel Engine Fueled with Fischer-Tropsch Diesel , 2013 .
[36] G. R. Kannan,et al. Experimental evaluation of DI diesel engine operating with diestrol at varying injection pressure an , 2011 .
[37] José Rodríguez-Fernández,et al. Combustion characteristics and emissions of FischerTropsch diesel fuels in IC engines , 2011 .
[38] M. Nydén,et al. Fuel emulsions and microemulsions based on Fischer-Tropsch diesel , 2010 .
[39] G. Nagarajan,et al. Effect of injection pressure on performance, emission and combustion characteristics of high linolenic linseed oil methyl ester in a DI diesel engine , 2009 .
[40] Shan-You Wang,et al. Effects of Fischer-Tropsch diesel fuel on combustion and emissions of direct injection diesel engine , 2008 .
[41] Phan Minh Duc,et al. Study on biogas premixed charge diesel dual fuelled engine , 2007 .
[42] Zhou Long-bao. Effects of Fischer-Tropsch Diesel Fuel on Combustion and Emissions of a Direct Injection Diesel Engine , 2007 .