Urban and building multiscale co-simulation: case study implementations on two university campuses

The co-simulation of both urban and building-level models leverages the advantages of both platforms. It better accounts for the localized effects of surrounding buildings, geography and climate conditions while maintaining high-fidelity building systems representation. This paper describes the co-simulation process of the building and urban-scale models of two university campuses in Switzerland using EnergyPlus and CitySim. In the first case study, on-site measured performance data is compared to the co-simulation results. The second case study examines the results of the two engines. The results show that coupling of EnergyPlus with CitySim resulted in a −15.5% and −7.5% impact on cooling consumption and a +6.5% and +4.8% impact on heating use as compared to solo simulations.The co-simulation process was able to better model realistic conditions for heating, but not cooling in one case study. It was able to substantially reduce the discrepancies in prediction between the engines in the other study.

[1]  Rui Zhang,et al.  Coupled EnergyPlus and computational fluid dynamics simulation for natural ventilation , 2013 .

[2]  Daren Thomas,et al.  Customizable Continuous Building Simulation using the Design Performance Toolkit and Kepler Scientific Workflows , 2012 .

[3]  Cláudio T. Silva,et al.  Reproducibility using VisTrails , 2014 .

[4]  Qinglin Meng,et al.  An integrated simulation method for building energy performance assessment in urban environments , 2012 .

[5]  Leslie K. Norford,et al.  Estimation of urban temperature and humidity using a lumped parameter model coupled with an EnergyPlus model , 2015 .

[6]  Christoph F. Reinhart,et al.  Analysis of a simplified calibration procedure for 18 design-phase building energy models , 2016 .

[7]  Darren Robinson,et al.  The impact of occupants' behaviour on building energy demand , 2011 .

[8]  Rex Britter,et al.  Combining a Detailed Building Energy Model with a Physically-Based Urban Canopy Model , 2011 .

[9]  Tianzhen Hong,et al.  Building Performance Simulation , 2014 .

[10]  Arno Schlueter,et al.  Building information model based energy/exergy performance assessment in early design stages , 2009 .

[11]  Mohammad Heidarinejad,et al.  Building neighborhood emerging properties and their impacts on multi-scale modeling of building energy and airflows , 2015 .

[12]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .

[13]  Jonas Allegrini,et al.  Influence of the urban microclimate in street canyons on the energy demand for space cooling and heating of buildings , 2012 .

[14]  Arno Schlueter,et al.  Automated daily pattern filtering of measured building performance data , 2015 .

[15]  Nick Beglinger,et al.  Minergie: The Swiss Sustainable Building Standard , 2009, Innovations: Technology, Governance, Globalization.

[16]  D. Robinson,et al.  Solar radiation modelling in the urban context , 2004 .

[17]  Jérôme Henri Kämpf,et al.  EVALUATION AND OPTIMIZATION OF RENEWABLE ENERGY IN THE "QUARTIER NORD": OBJECTIVE ZERO-POWER , 2015 .

[18]  V. Dorer,et al.  Modelling The Urban Microclimate And Its Impact On The Energy Demand Of Buildings And Building Clusters , 2013, Building Simulation Conference Proceedings.

[19]  V. Dorer,et al.  Simulating external longwave radiation exchange for buildings , 2014 .

[20]  Chandra Sekhar,et al.  MODELING OF THE SINGLE COIL, TWIN FAN AIR-CONDITIONING SYSTEM IN ENERGYPLUS , 2010 .

[21]  Michael Wetter,et al.  Co-simulation of building energy and control systems with the Building Controls Virtual Test Bed , 2011 .

[22]  Mark Jennings,et al.  A review of urban energy system models: Approaches, challenges and opportunities , 2012 .

[23]  Arno Schlueter,et al.  Long wave radiation exchange for urban scale modelling within a co-simulation environment , 2015 .

[24]  Zoltán Nagy,et al.  BIM-EXTRACTED ENERGYPLUS MODEL CALIBRATION FOR RETROFIT ANALYSIS OF A HISTORICALLY LISTED BUILDING IN SWITZERLAND , 2014 .

[25]  A. Rasheed,et al.  CITYSIM: Comprehensive Micro-Simulation of Resource Flows for Sustainable Urban Planning , 2009 .

[26]  Jérôme Kämpf,et al.  Multiscale Co-Simulation of Energyplus and Citysim Models derived from a Building Information Model , 2014 .

[27]  Marjorie Musy,et al.  Microclimatic coupling as a solution to improve building energy simulation in an urban context , 2011 .

[28]  Thierry S. Nouidui,et al.  Functional mock-up unit for co-simulation import in EnergyPlus , 2014 .

[29]  Thierry S. Nouidui,et al.  Tool coupling for the design and operation of building energy and control systems based on the Functional Mock-up Interface standard , 2014 .

[30]  Michael Wetter,et al.  Co-simulation for performance prediction of integrated building and HVAC systems - An analysis of solution characteristics using a two-body system , 2010, Simul. Model. Pract. Theory.

[31]  Jennifer M. Logue,et al.  A simplified model for estimating population-scale energy impacts of building envelope air tightening and mechanical ventilation retrofits , 2016 .