Development of a Code with the Capability of Internal Assessment of Uncertainty

The internal assessment of uncertainty is a desirable capability for thermal-hydraulic system codes. This consists of the possibility of obtaining proper uncertainty bands each time a nuclear plant transient scenario is calculated. A methodology suitable for introducing such a capability into a system code is discussed. At the basis of the derivation of the code with (the capability of) internal assessment of uncertainty (CIAU), there is the uncertainty methodology based on the accuracy extrapolation (UMAE), previously proposed by the University of Pisa, although other uncertainty methodologies can be used for the same purpose. The idea of the CIAU is the identification and the characterization of standard plant statuses and the association of uncertainty to each status. One hypercube and one time interval identify the plant status. Quantity and time uncertainties are combined for each plant status. The recently released U.S. Nuclear Regulatory Commission RELAP5/MOD3.2 system code constitutes the CIAU. This is used for showing the applicability of the proposed method. The derivation of the methodology is discussed, and reference results of pressurized water reactor plant transients are shown bounded by the CIAU-calculated uncertainty bands.

[1]  E. Royer,et al.  The 1995 look-up table for critical heat flux in tubes , 1996 .

[2]  Francesco Saverio D'Auria,et al.  Scaling of the accuracy of the Relap5/mod2 code , 1993 .

[3]  I. Catton,et al.  Quantifying reactor safety margins part 1: An overview of the code scaling, applicability, and uncertainty evaluation methodology , 1990 .

[4]  Francesco Saverio D'Auria,et al.  Determination of Code Accuracy in Predicting Small-Break LOCA Experiment , 1997 .

[5]  Francesco Saverio D'Auria,et al.  Advancements in planning an IAU code , 1997 .

[6]  Francesco Saverio D'Auria,et al.  Methodology for the Evaluation of Thermalhydraulic Codes Accuracy , 1994 .

[7]  Francesco Saverio D'Auria,et al.  Good Practices for User Effect Reduction , 1998 .

[8]  Francesco Saverio D'Auria,et al.  Scaling of natural circulation in PWR systems , 1991 .

[9]  Francesco Saverio D'Auria,et al.  CSNI Code Validation Matrix of Thermo-Hydraulic Codes for LWR LOCA and Transients , 1987 .

[10]  Francesco Saverio D'Auria,et al.  Application of Relap5/Mod3 to the evaluation of loss of feedwater in test facilities and in nuclear plants , 1993 .

[11]  Francesco Saverio D'Auria,et al.  Evaluation of the data base from high power and low power small break LOCA counterpart tests performed in LOBI, SPES, BETHSY and LSTF facilities , 1994 .

[12]  Francesco Saverio D'Auria,et al.  Scaling of complex phenomena in system thermal hydraulics , 1993 .

[13]  F. D'Auria,et al.  User effects on the thermal-hydraulic transient system code calculations , 1993 .

[14]  Francesco Saverio D'Auria,et al.  A proposed Methodology for the Analysis of a Phenomenon in Separate Effects and Integral Test Facilities , 1995 .

[15]  Francesco Saverio D'Auria,et al.  Code validation and uncertainties in system thermalhydraulics , 1998 .

[16]  Francesco Saverio D'Auria,et al.  Application of the Fast Fourier Transform Method to evaluate the accuracy of SBLOCA Data Base , 1997 .

[17]  Francesco Saverio D'Auria,et al.  A methodology for the qualification of thermalhydraulic codes Nodalizations , 1992 .

[18]  F. D'auria,et al.  Outline of the uncertainty methodology based on accuracy extrapolation , 1995 .

[19]  Francesco Saverio D'Auria,et al.  Development of Matrix and Vector for Internal Assessment of Uncertainty , 1999 .

[20]  Washington,et al.  RELAP5/MOD3 code manual: Code structure, system models, and solution methods. Volume 1 , 1995 .

[21]  Francesco Saverio D'Auria,et al.  Overview of Uncertainty Issues and Methodologies , 1998 .