A functional on-chip pressure generator using solid chemical propellant for disposable lab-on-a-chip.

This paper presents a functional on-chip pressure generator that utilizes chemical energy from a solid chemical propellant to perform fluidic delivery in applications of plastic-based disposable biochips or lab-on-a-chip systems. In this functional on-chip pressure generator, azobis-isobutyronitrile (AIBN) as the solid chemical propellant is deposited on a microheater using a screen-printing technique, which can heat the AIBN at 70 degrees C to produce nitrogen gas. The output pressure of nitrogen gas, generated from the solid chemical propellant, is adjustable to a desired pressure by controlling the input power of the heater. Using this chemical energy source, the generated pressure depends on the deposited amount of the solid chemical propellant and the temperature of the microheater. Experimental measurements show that this functional on-chip pressure generator can achieve around 3 000 Pa pressure when 189 mJ of energy is applied to heat the 100 microg of AIBN. This pressure can drive 50 nl of water through a microfluidic channel of 70 mm and cross-sectional area of 100 microm x 50 microm. Due to its compact size, ease of fabrication and integration, high reliability (no moving parts), biologically inert gas output along with functionality of gas generation, this pressure generator will be an excellent pressure source for handling the fluids of disposable lab-on-a-chip, biochemical analysis systems or drug delivery systems.

[1]  Carole Rossi,et al.  Design, fabrication and modeling of solid propellant microrocket-application to micropropulsion , 2002 .

[2]  Young-Ho Cho,et al.  High-impulse, low-power, digital microthrusters using low boiling temperature liquid propellant with high viscosity fluid plug , 2002 .

[3]  K. Pister,et al.  Microrockets for Smart Dust , 2001 .

[4]  C. Dubois,et al.  On the Optimization of GAP‐based Ducted Rocket Fuels from Gas Generator Exhaust Characterization , 2001 .

[5]  Henggao Ding,et al.  Study of a vaporizing water micro-thruster , 2001 .

[6]  Carole Rossi,et al.  Prediction of the performance of a Si-micromachined microthruster by computing the subsonic gas flow inside the thruster , 2000 .

[7]  R. Morris,et al.  Development of a model system to study fuel autoxidation in supercritical media: decomposition kinetics of 2,2′-azobis(isobutyronitrile) in supercritical carbon dioxide , 2000 .

[8]  Scott D. Collins,et al.  Vaporizing liquid microthruster , 2000 .

[9]  J. Chenal,et al.  Effect of stannous octoate on the thermal decomposition of 2,2′‐azobis(isobutyronitrile) , 2000 .

[10]  Carole Rossi,et al.  Pyrotechnic actuator: a new generation of Si integrated actuator , 1999 .

[11]  R. B. Cohen,et al.  Digital MicroPropulsion , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[12]  Martin Richter,et al.  Robust design of gas and liquid micropumps , 1998 .