Abrasive flow machining (AFM) is a multivariable finishing process which finds its use in difficult to finish surfaces on difficult to finish materials. Near accurate prediction of generated surface by this process could be very useful for the practicing engineers. Conventionally, regression models are used for such prediction. This paper presents the use of artificial neural networks (ANN) for modeling and simulation of response characteristics during AFM process in finishing of Al/SiCp metal matrix composites (MMCs) components. A generalized back-propagation neural network with five inputs, four outputs, and one hidden layer is designed. Based upon the experimental data of the effects of AFM process parameters, e.g., abrasive mesh size, number of finishing cycles, extrusion pressure, percentage of abrasive concentration, and media viscosity grade, on performance characteristics, e.g., arithmetic mean value of surface roughness (Ra, micrometers), maximum peak–valley surface roughness height (Rt, micrometers), improvement in Ra (i.e., ΔRa), and improvement in Rt (i.e., ΔRt), the networks are trained for finishing of Al/SiCp-MMC cylindrical components. ANN models are compared with multivariable regression analysis models, and their prediction accuracy is experimentally validated.
[1]
Simon Haykin,et al.
Neural Networks: A Comprehensive Foundation
,
1998
.
[2]
T. Warren Liao,et al.
A neural network approach for grinding processes: Modelling and optimization
,
1994
.
[3]
Alakesh Manna,et al.
Investigation for optimal parametric combination for achieving better surface finish during turning of Al/SiC-MMC
,
2004
.
[4]
Alakesh Manna,et al.
Current status and application of abrasive flow finishing processes: A review
,
2009
.
[5]
V. K. Jain,et al.
Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process
,
2009
.
[6]
Alakesh Manna,et al.
Optimum selection of abrasive flow machining conditions during fine finishing of Al/15 wt% SiC-MMC using Taguchi method
,
2010
.