Micromechanical properties of poly(butylene terephthalate) nanocomposites with single- and multi-walled carbon nanotubes

Polymer nanocomposites with carbon nanotubes (CNT) are becoming important structural materials because of their superior mechanical properties and easy processability. The objective of the work is to investigate the influence of small amounts of single walled carbon nanotubes (SWCNT), as well as multi-walled carbon nanotubes (MWCNT), on the microhardness of a thermoplastic polymer such as poly(butylene terephthalate) (PBT). The nanocomposites were obtained by introducing the CNT into the reaction mixture during the synthesis of PBT. The polymers without carbon nanotubes (reference material) and with carbon nanotubes were synthesized using an in-situ polycondensation reaction process. Weight percentages ranging from 0.01 to 0.2 wt% of the single walled and from 0.01 to 0.35 wt% of the multi-walled nanotubes were dispersed in 1,4-butanediol (BD) by ultrasonication and by ultra high speed stirring. The nanocomposites were extruded followed by injection molding. The samples were characterized by electron microscopy and microindentation hardness techniques. The variations of the micromechanical properties (indentation hardness) of the nanocomposites with nanotube content and with temperature are discussed in the light of the stress transfer between the polymer matrix and nanotubes, the degree of dispersion, the nature of the tubes and other structural parameters.

[1]  J. Coleman,et al.  Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites , 2002 .

[2]  Sidney R. Cohen,et al.  Measurement of carbon nanotube-polymer interfacial strength , 2003 .

[3]  J. Seferis,et al.  Microhardness of carbon fiber reinforced epoxy and thermoplastic polyimide composites , 1995 .

[4]  J. Martínez-Salazar,et al.  Physical ageing and glass transition in amorphous polymers as revealed by microhardness , 1989 .

[5]  G. A. D. Briggs,et al.  Elastic and shear moduli of single-walled carbon nanotube ropes , 1999 .

[6]  J. Kenny,et al.  Physical and mechanical behavior of single-walled carbon nanotube/polypropylene/ethylene-propylene-diene rubber nanocomposites , 2003 .

[7]  R. Gorga,et al.  Toughness enhancements in poly(methyl methacrylate) by addition of oriented multiwall carbon nanotubes , 2004 .

[8]  Milo S. P. Shaffer,et al.  Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties , 1999 .

[9]  M. Santare,et al.  Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite films , 2003 .

[10]  P. Cebe,et al.  Melting behavior of high performance composite matrix polymers: Poly(phenylene sulfide) , 1990 .

[11]  Tianxi Liu,et al.  Morphology and Mechanical Properties of Multiwalled Carbon Nanotubes Reinforced Nylon-6 Composites , 2004 .

[12]  H. Wagner,et al.  Buckling and Collapse of Embedded Carbon Nanotubes , 1998 .

[13]  O. Park,et al.  The fabrication of syndiotactic polystyrene/organophilic clay nanocomposites and their properties , 2001 .

[14]  Paul Calvert,et al.  Nanotube composites: A recipe for strength , 1999, Nature.

[15]  F. Chang,et al.  Reactive compatibilization of polyamide‐6 (PA 6)/polybutylene terephthalate (PBT) blends by a multifunctional epoxy resin , 2000 .

[16]  V. Castaño,et al.  Improvement of Thermal and Mechanical Properties of Carbon Nanotube Composites through Chemical Functionalization , 2003 .

[17]  B. Wunderlich.  Reversible crystallization and the rigid-amorphous phase in semicrystalline macromolecules , 2003 .

[18]  K. Schulte,et al.  Nanocomposites based on multiblock polyester elastomers (PEE) and carbon nanotubes (CNT) , 2003 .

[19]  Ya‐Ping Sun,et al.  Polymeric Carbon Nanocomposites from Carbon Nanotubes Functionalized with Matrix Polymer , 2003 .

[20]  Kenneth A. Smith,et al.  Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monoxide , 1999 .

[21]  Jiaqi Fan,et al.  Polyamide 6-clay nanocomposites/polypropylene-grafted-maleic anhydride alloys , 2001 .

[22]  A. Sakurai,et al.  Structure and mechanical properties of polyethylene-fullerene composites , 1996, Journal of Materials Science.

[23]  Joerg Mayer,et al.  Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix , 2002 .

[24]  Jun Liu,et al.  Surfactant-assisted processing of carbon nanotube/polymer composites , 2000 .

[25]  Hui-Ming Cheng,et al.  Tensile strength of single-walled carbon nanotubes directly measured from their macroscopic ropes , 2000 .

[26]  Zhi‐Xin Guo,et al.  Fabrication and Characterization of Soluble Multi‐Walled Carbon Nanotubes Reinforced P(MMA‐co‐EMA) Composites , 2004 .

[27]  S. Subramoney.  Novel Nanocarbons—Structure, Properties, and Potential Applications , 1998 .

[28]  David Hui,et al.  On the effective elastic moduli of carbon nanotubes for nanocomposite structures , 2004 .

[29]  M. Meyyappan,et al.  Gamma Radiation Effects on the Glass Transition Temperature and Mechanical Properties of PMMA/soot nanocomposites , 2004 .

[30]  G. Xu,et al.  Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites , 2001 .