A Review of Thermal Response Test Analysis Using Pumping Test Concepts

The design of ground-coupled heat pump systems requires knowledge of the thermal properties of the subsurface and boreholes. These properties can be measured with in situ thermal response tests (TRT), where a heat transfer fluid flowing in a ground heat exchanger is heated with an electric element and the resulting temperature perturbation is monitored. These tests are analogous to standard pumping tests conducted in hydrogeology, because a system that is initially assumed at equilibrium is perturbed and the response is monitored in time, to assess the system's properties with inverse modeling. Although pumping test analysis is a mature topic in hydrogeology, the current analysis of temperature measurements in the context of TRTs is comparatively a new topic and it could benefit from the application of concepts related to pumping tests. The purpose of this work is to review the methodology of TRTs and improve their analysis using pumping test concepts, such as the well function, the superposition principle, and the radius of influence. The improvements are demonstrated with three TRTs. The first test was conducted in unsaturated waste rock at an active mine and the other two tests aimed at evaluating the performance of thermally enhanced pipe installed in a fully saturated sedimentary rock formation. The concepts borrowed from pumping tests allowed the planning of the duration of the TRTs and the analysis of variable heat injection rate tests accounting for external heat transfer and temperature recovery, which reduces the uncertainty in the estimation of thermal properties.

[1]  G. Hellström,et al.  Multipole method to compute the conductive heat flows to and between pipes in a composite cylinder , 1987 .

[2]  S. Gehlin Thermal response test : in situ measurements of thermal properties in hard rock , 1998 .

[3]  C. E. Jacob,et al.  A generalized graphical method for evaluating formation constants and summarizing well‐field history , 1946 .

[4]  R. Lefebvre,et al.  Multiphase transfer processes in waste rock piles producing acid mine drainage 2. Applications of numerical simulation. , 2001, Journal of contaminant hydrology.

[5]  Roland Wagner,et al.  Evaluating thermal response tests using parameter estimation for thermal conductivity and thermal capacity , 2005 .

[6]  Y. Gu,et al.  Development of an equivalent diameter expression for vertical U-tubes used in ground-coupled heat pumps , 1998 .

[7]  L. Lamarche,et al.  New solutions for the short-time analysis of geothermal vertical boreholes , 2007 .

[8]  Anna-Maria Gustafsson Thermal response test : numerical simulations and analyses , 2006 .

[9]  Webe João Mansur,et al.  Numerical evaluation of Theis and Hantush-Jacob well functions , 2006 .

[10]  D. Marcotte,et al.  On the estimation of thermal resistance in borehole thermal conductivity test , 2008 .

[11]  G. Kamp Calculation of Constant-Rate Drawdowns from Stepped-Rate Pumping Tests , 1989 .

[12]  Richard A. Beier Equivalent Time for Interrupted Tests on Borehole Heat Exchangers , 2008 .

[13]  H. Paksoy,et al.  Ground water level influence on thermal response test in Adana, Turkey , 2008 .

[14]  Burkhard Sanner,et al.  Technology, development status, and routine application of Thermal Response Test , 2007 .

[15]  K. Lim,et al.  An experimental study on the thermal performance of ground heat exchanger , 2007 .

[16]  E. Rohner,et al.  A New, Small, Wireless Instrument to Determine Ground Thermal Conductivity In-Situ for Borehole Heat Exchanger Design , 2005 .

[17]  J. Beck,et al.  Field Test of a New Method for Determining Soil Formation Thermal Conductivity and Borehole Resistance , 2000 .

[18]  C. V. Theis The relation between the lowering of the Piezometric surface and the rate and duration of discharge of a well using ground‐water storage , 1935 .

[19]  A. Busso,et al.  First in situ determination of ground and borehole thermal properties in Latin America , 2004 .

[20]  Stanislaw Kajl,et al.  A review of methods to evaluate borehole thermal resistances in geothermal heat-pump systems , 2010 .

[21]  P. Gélinas,et al.  Multiphase transfer processes in waste rock piles producing acid mine drainage 1: Conceptual model and system characterization. , 2001, Journal of contaminant hydrology.

[22]  Per Eskilson Thermal analysis of heat extraction boreholes , 1987 .

[23]  P. Pehme,et al.  The Active Line Source Temperature Logging Technique and its Application in Fractured Rock Hydrogeology , 2007 .

[24]  Mostafa H. Sharqawy,et al.  Effective pipe-to-borehole thermal resistance for vertical ground heat exchangers , 2009 .

[25]  H. H. Cooper,et al.  Drawdown in a well of large diameter , 1967 .

[26]  M. Bernier,et al.  Validity ranges of three analytical solutions to heat transfer in the vicinity of single boreholes , 2009 .

[27]  L. Gosselin,et al.  Numerical analysis of thermal response tests with a groundwater flow and heat transfer model , 2011 .

[28]  Hikari Fujii,et al.  An improved thermal response test for U-tube ground heat exchanger based on optical fiber thermometers , 2009 .

[29]  W. Bierschenk,et al.  DETERMINING WELL EFFICIENCY BY MULTIPLE STEP-DRAWDOWN TESTS , 2005 .

[30]  S. Gehlin Thermal response test : method development and evaluation , 2002 .

[31]  Jasmin Raymond,et al.  Geothermal system optimization in mining environments , 2010 .

[32]  Esmail M. A. Mokheimer,et al.  Energy, exergy and uncertainty analyses of the thermal response test for a ground heat exchanger , 2009 .

[33]  Mustafa Inalli,et al.  In-situ thermal response test for ground source heat pump system in Elazığ, Turkey , 2009 .

[34]  G. Hellström,et al.  Comparison of four models for thermal response test evaluation , 2003 .

[35]  Daniel Pahud,et al.  Numerical evaluation of thermal response tests , 2007 .

[36]  Louis Lamarche,et al.  A new contribution to the finite line-source model for geothermal boreholes , 2007 .

[37]  P. Giao Revisit of Well Function Approximation and An Easy Graphical Curve Matching Technique for Theis' Solution , 2003, Ground water.

[38]  Burkhard Sanner,et al.  Thermal Response Test - Current Status and World-Wide Application , 2005 .

[39]  Rajesh Srivastava,et al.  Implications of Using Approximate Expressions for Well Function , 1995 .

[40]  B. Nordell,et al.  Determining undisturbed ground temperature for thermal response test , 2003 .

[41]  M. S. Hantush Aquifer Tests on Partially Penetrating Wells , 1961 .