Local oxidation of silicon surfaces by dynamic force microscopy: Nanofabrication and water bridge formation

Local oxidation of silicon surfaces by atomic force microscopy is a very promising lithographic approach at nanometer scale. Here, we study the reproducibility, voltage dependence, and kinetics when the oxidation is performed by dynamic force microscopy modes. It is demonstrated that during the oxidation, tip and sample are separated by a gap of a few nanometers. The existence of a gap increases considerably the effective tip lifetime for performing lithography. A threshold voltage between the tip and the sample must be applied in order to begin the oxidation. The existence of a threshold voltage is attributed to the formation of a water bridge between tip and sample. It is also found that the oxidation kinetics is independent of the force microscopy mode used (contact or noncontact).

[1]  Kazuhiko Matsumoto,et al.  Application of scanning tunneling microscopy nanofabrication process to single electron transistor , 1996 .

[2]  N. Barniol,et al.  Modification of HF‐treated silicon (100) surfaces by scanning tunneling microscopy in air under imaging conditions , 1992 .

[3]  T. Thundat,et al.  Nanolithography on semiconductor surfaces under an etching solution , 1990 .

[4]  Hyongsok T. Soh,et al.  Fabrication of 0.1 um metal oxide semiconductor field-effect transistors with the atomic force microscope , 1995 .

[5]  Phaedon Avouris,et al.  Atomic force microscope tip-induced local oxidation of silicon: kinetics, mechanism, and nanofabrication , 1997 .

[6]  Emmanuel Dubois,et al.  NANOOXIDATION USING A SCANNING PROBE MICROSCOPE : AN ANALYTICAL MODEL BASED ON FIELD INDUCED OXIDATION , 1997 .

[7]  Eric S. Snow,et al.  Single‐atom point contact devices fabricated with an atomic force microscope , 1996 .

[8]  K. Birkelund,et al.  Combined AFM and laser lithography on hydrogen-passivated amorphous silicon , 1996 .

[9]  G. Abadal,et al.  Nanometer‐scale oxidation of Si(100) surfaces by tapping mode atomic force microscopy , 1995 .

[10]  Javier Tamayo,et al.  Effects of elastic and inelastic interactions on phase contrast images in tapping-mode scanning force microscopy , 1997 .

[11]  Ricardo Garcia,et al.  Deformation, Contact Time, and Phase Contrast in Tapping Mode Scanning Force Microscopy , 1996 .

[12]  Modification of n-Si(100) Surface by Scanning Tunneling Microscope Tip-Induced Anodization under Nitrogen Atmosphere , 1994 .

[13]  Michael T. Postek,et al.  Modification of hydrogen-passivated silicon by a scanning tunneling microscope operating in air , 1990 .

[14]  Kang L. Wang,et al.  Nanometer‐structure writing on Si(100) surfaces using a non‐contact‐mode atomic force microscope , 1994 .

[15]  P. McMarr,et al.  Fabrication of silicon nanostructures with a scanning tunneling microscope , 1993 .

[16]  David R. Allee,et al.  Selective area oxidation of silicon with a scanning force microscope , 1993 .

[17]  L. Ley,et al.  Nanometer‐scale field‐induced oxidation of Si(111):H by a conducting‐probe scanning force microscope: Doping dependence and kinetics , 1995 .

[18]  B. Irmer,et al.  Fabrication of Ti/TiOx tunneling barriers by tapping mode atomic force microscopy induced local oxidation , 1997 .