Characterization of a Slim-Hole Gamma-Ray Sonde for Potash Exploration Applications in a Simple Test Pit Environment

Prior studies of gamma-ray tools have all been focused around instruments that typically evaluate sandstone, shale, and limestone formations that are encountered in oilfield logging. For this study, a set of experiments were conducted to characterize the lateral and vertical response functions for a slim-hole gammaray sonde used in the mining industry to locate potash mineral deposits. The experiments were conducted in an indoor warehouse environment utilizing a set of large plastic tanks that were filled with light evaporite minerals (granular halite and sylvite) in differing arrangements to simulate various possible formation configurations. Measurements were taken while using a centralized slim-hole gamma ray tool in an air filled 4.5 inch plastic borehole. Sequential tests were run to establish the linearity of tool response, the radial depth of investigation, the vertical response function, and the repeatability of the measurement. Radial depth of investigation was measured using concentric radioactive rings of increasing diameter with two possible intermediary substances, air and halite. To test vertical response a column structure was built using halite as the bottom “bed” and a sylvite layer was systematically added in known quantities to acquire a response function of increasing thicknesses. Repeatability of the measurements was verified by logging several points with multiple tools of the same model for all the various experimental setups. Results were corrected for background radiation to predict the response in solid subsurface conditions without incident surface radiation seen in the experiments. The findings were also corrected for the differences between low porosity subsurface conditions and the unconsolidated granular products that were used in the simulated formation. The experimental results were surprisingly close to theoretical tool response for an oil field sonde, as well as to published specifications of major oilfield logging vendor’s tools. Consequently, gamma-ray logs collected with a slim-hole tool in shallow mineral core holes should be directly comparable to oilfield gamma-ray tools run in open-hole wellbores, once corrections for borehole size and fluid content using best practices are applied.