Crack Initiation, Propagation and Coalescence in Rock-Like Material Containing Two Flaws: a Numerical Study Based on Bonded-Particle Model Approach

Cracking and coalescence behavior in a rectangular rock-like specimen containing two parallel (stepped and coplanar) pre-existing open flaws under uniaxial compression load has been numerically studied by a parallel bonded-particle model, which is a type of bonded-particle model. Crack initiation and propagation from two flaws replicate most of the phenomena observed in prior physical experiments, such as the type (tensile/shear) and the initiation stress of the first crack, as well as the coalescence pattern. Eight crack coalescence categories representing different crack types and trajectories are identified. New coalescence categories namely “New 1” and “New 2”, which are first observed in the present simulation, are incorporated into categories 3 and 4, and category 5 previously proposed by the MIT Rock Mechanics Research Group, respectively. The flaw inclination angle (β), the ligament length (L) (spacing between two flaws) and the bridging angle (α) (inclination of a line linking up the inner flaw tips, between two flaws) have different effects on the coalescence patterns, coalescence stresses (before, at or post the peak stress) as well as peak strength of specimens. Some insights on the coalescence processes, such as the initiation of cracks in the intact part of specimens at a distance away from the flaw tips, and coalescence due to the development and linkage of a number of steeply inclined to vertical macro-tensile cracks are revealed by the present numerical study.

[1]  Antonio Bobet,et al.  Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression , 2010 .

[2]  Paul Tapponnier,et al.  Development of stress-induced microcracks in Westerly Granite , 1976 .

[3]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[4]  Philip G. Meredith,et al.  Micromechanics of brittle creep in rocks , 2012 .

[5]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[6]  A. Ingraffea,et al.  FINITE ELEMENT MODELS FOR ROCK FRACTURE MECHANICS , 1980 .

[7]  H. H. Einstein,et al.  Coalescence Behavior In Carrara Marble And Molded Gypsum Containing Artificial Flaw Pairs Under Uniaxial Compression , 2007 .

[8]  Hussain,et al.  Strain Energy Release Rate for a Crack Under Combined Mode I and Mode II , 1974 .

[9]  Omer Mughieda,et al.  Fracture mechanisms of offset rock joints-A laboratory investigation , 2004 .

[10]  A. Fakhimi,et al.  Application of Dimensional Analysis in Calibration of a Discrete Element Model for Rock Deformation and Fracture , 2007 .

[11]  G. Fonseka,et al.  SCANNING ELECTRON MICROSCOPE AND ACOUSTIC EMISSION STUDIES OF CRACK DEVELOPMENT IN ROCKS , 1985 .

[12]  C. Tang,et al.  Microcrack statistics, Weibull distribution and micromechanical modeling of compressive failure in rock , 2006 .

[13]  Marwan K. Khraisheh,et al.  A new criterion for mixed mode fracture initiation based on the crack tip plastic core region , 2004 .

[14]  Louis Ngai Yuen Wong,et al.  Frictional crack initiation and propagation analysis using the numerical manifold method , 2012 .

[15]  Diego Mas Ivars,et al.  The synthetic rock mass approach for jointed rock mass modelling , 2011 .

[16]  Louis Ngai Yuen Wong,et al.  Influence of flaw inclination angle and loading condition on crack initiation and propagation , 2012 .

[17]  Antonio Bobet,et al.  Crack coalescence in specimens with open and closed flaws: A comparison , 2009 .

[18]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[19]  Jean-Albert Ferrez,et al.  Dynamic triangulations for efficient 3D simulation of granular materials , 2001 .

[20]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[21]  A. Fakhimi,et al.  Application of slightly overlapped circular particles assembly in numerical simulation of rocks with high friction angles , 2004 .

[22]  Beatriz Menéndez,et al.  Micromechanics of brittle faulting and cataclastic flow in Berea sandstone , 1996 .

[23]  A. Bobet,et al.  Coalescence of Multiple Flaws in Uniaxial Compression , 2000 .

[24]  C. Derek Martin,et al.  Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading , 2010 .

[25]  K. T. Chau,et al.  Crack coalescence in a rock-like material containing two cracks , 1998 .

[26]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[27]  Teng-fong Wong,et al.  MICROMECHANICS OF FAULTING IN WESTERLY GRANITE , 1982 .

[28]  N. A. Chandler,et al.  The progressive fracture of Lac du Bonnet granite , 1994 .

[29]  L. Wong,et al.  Cracking Processes in Rock-Like Material Containing a Single Flaw Under Uniaxial Compression: A Numerical Study Based on Parallel Bonded-Particle Model Approach , 2011, Rock Mechanics and Rock Engineering.

[30]  H. H. Einstein,et al.  Failure Mechanisms of Fractured Rock - A Fracture Coalescence Model , 1991 .

[31]  R. Paul Young,et al.  Micromechanical modeling of cracking and failure in brittle rocks , 2000 .

[32]  Herbert H. Einstein,et al.  Fracture coalescence in rock-type materials under uniaxial and biaxial compression , 1998 .

[33]  Louis Ngai Yuen Wong,et al.  Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression , 2009 .

[34]  Mark S. Diederichs,et al.  Manuel Rocha Medal Recipient Rock Fracture and Collapse Under Low Confinement Conditions , 2003 .

[35]  Guowei Ma,et al.  Modelling rock fracturing and blast-induced rock mass failure via advanced discretisation within the discontinuous deformation analysis framework , 2011 .

[36]  R. P. Young,et al.  Distinct element modeling of hydraulically fractured Lac du Bonnet granite , 2005 .

[37]  Alison Ord,et al.  Phenomenological modelling of crack generation in brittle crustal rocks using the particle simulation method , 2007 .

[38]  K. T. Chau,et al.  Analysis of crack coalescence in rock-like materials containing three flaws—Part I: experimental approach , 2001 .

[39]  L. Wong,et al.  Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1. Macroscopic Observations and Interpretation , 2009 .

[40]  A. Fakhimi,et al.  Discrete element analysis of the effect of pore size and pore distribution on the mechanical behavior of rock , 2011 .

[41]  S. M. Khan,et al.  Analysis of mixed mode crack initiation angles under various loading conditions , 2000 .

[42]  G. Shi,et al.  Discontinuous Deformation Analysis , 1984 .

[43]  Herbert H. Einstein,et al.  Coalescence of fractures under shear stresses in experiments , 1995 .

[44]  Jae-Joon Song,et al.  Numerical simulation of a direct shear test on a rock joint using a bonded-particle model , 2009 .

[45]  K. Zhou,et al.  Particle simulation of the failure process of brittle rock under triaxial compression , 2010 .

[46]  Antonio Bobet,et al.  Modeling of Crack Initiation, Propagation and Coalescence in Uniaxial Compression , 2000 .

[47]  C. Scholz,et al.  Dilatancy in the fracture of crystalline rocks , 1966 .

[48]  Herbert H. Einstein,et al.  Numerical modeling of fracture coalescence in a model rock material , 1998 .

[49]  Mark S. Diederichs,et al.  Instability of hard rockmasses, the role of tensile damage and relaxation , 2000 .

[50]  C. Martin,et al.  A clumped particle model for rock , 2007 .

[51]  Ove Stephansson,et al.  Modification of the G-criterion for crack propagation subjected to compression , 1994 .

[52]  Seokwon Jeon,et al.  An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression , 2011 .

[53]  D. Potyondy.  Simulating stress corrosion with a bonded-particle model for rock , 2007 .