Length scale and manufacturability in density-based topology optimization
暂无分享,去创建一个
[1] K. Svanberg,et al. On the trajectories of penalization methods for topology optimization , 2001 .
[2] James K. Guest,et al. Topology optimization with multiple phase projection , 2009 .
[3] G. Allaire,et al. A level-set method for shape optimization , 2002 .
[4] O. Sigmund,et al. Checkerboard patterns in layout optimization , 1995 .
[5] Jihong Zhu,et al. Topology Optimization in Aircraft and Aerospace Structures Design , 2016 .
[6] Jan Sokolowski,et al. On the Topological Derivative in Shape Optimization , 1999 .
[7] Anders Clausen,et al. Topology optimization with flexible void area , 2014 .
[8] Ole Sigmund,et al. On projection methods, convergence and robust formulations in topology optimization , 2011, Structural and Multidisciplinary Optimization.
[9] B. Lazarov,et al. Tailoring Macroscale Response of Mechanical and Heat Transfer Systems by Topology Optimization of Microstructural Details , 2015 .
[10] M. Bendsøe. Optimal shape design as a material distribution problem , 1989 .
[11] A. Saxena. Topology design with negative masks using gradient search , 2011 .
[12] Boyan Stefanov Lazarov,et al. Topology optimization of pulse shaping filters using the Hilbert transform envelope extraction , 2011 .
[13] Martin Leary,et al. Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures , 2014 .
[14] Ole Sigmund,et al. Sensitivity Filters In Topology Optimisation As A Solution To Helmholtz Type Differential Equation , 2009 .
[15] Tsuyoshi Nomura,et al. Structural topology optimization for the design of broadband dielectric resonator antennas using the finite difference time domain technique , 2007 .
[16] Joe Alexandersen,et al. Topology optimisation of manufacturable microstructural details without length scale separation using a spectral coarse basis preconditioner - DTU Orbit (09/10/2017) Topology optimisation of manufacturable microstructural details without length scale separation using a spectral coarse basis precondi , 2015 .
[17] M. Diehl,et al. Robust topology optimization accounting for misplacement of material , 2012, Structural and Multidisciplinary Optimization.
[18] Dan M. Frangopol,et al. Life-cycle reliability-based optimization of civil and aerospace structures , 2003 .
[19] Boyan S. Lazarov. Topology Optimization Using Multiscale Finite Element Method for High-Contrast Media , 2013, LSSC.
[20] Qi Xia,et al. A level set based method for the optimization of cast part , 2010 .
[21] Jean-Pierre Raymond,et al. ESAIM: Control, Optimisation and Calculus of Variations , 1999 .
[22] K. Svanberg,et al. An alternative interpolation scheme for minimum compliance topology optimization , 2001 .
[23] G. Allaire,et al. Structural optimization using sensitivity analysis and a level-set method , 2004 .
[24] Thomas A. Poulsen. A new scheme for imposing a minimum length scale in topology optimization , 2003 .
[25] O. Sigmund,et al. Filters in topology optimization based on Helmholtz‐type differential equations , 2011 .
[26] Fred van Keulen,et al. Efficient Kriging-based robust optimization of unconstrained problems , 2014, J. Comput. Sci..
[27] S. Kawata,et al. Three-dimensional microfabrication with two-photon-absorbed photopolymerization. , 1997, Optics letters.
[28] Jakob S. Jensen,et al. Robust topology optimization of photonic crystal waveguides with tailored dispersion properties , 2011 .
[29] Rui Hu,et al. H-DGTP—a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures , 2015 .
[30] C. S. Jog,et al. A new approach to variable-topology shape design using a constraint on perimeter , 1996 .
[31] Geert Lombaert,et al. Robust topology optimization of structures with imperfect geometry based on geometric nonlinear analysis , 2015 .
[32] Ole Sigmund,et al. Creating geometrically robust designs for highly sensitive problems using topology optimization , 2015 .
[33] M. Zhou,et al. The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .
[34] Ole Sigmund,et al. On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .
[35] James K. Guest,et al. Optimizing inclusion shapes and patterns in periodic materials using Discrete Object Projection , 2014 .
[36] Alexander Shapiro,et al. Optimization of Convex Risk Functions , 2006, Math. Oper. Res..
[37] T. E. Bruns,et al. Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .
[38] T. Chang. Proximity effect in electron-beam lithography , 1975 .
[39] Jae-Eun Kim,et al. Filtering technique to control member size in topology design optimization , 2004 .
[40] D. Tortorelli,et al. A geometry projection method for continuum-based topology optimization with discrete elements , 2015 .
[41] D. Xiu. Numerical Methods for Stochastic Computations: A Spectral Method Approach , 2010 .
[42] Matthijs Langelaar,et al. Robust optimization of 2x2 multimode interference couplers with fabrication uncertainties , 2013, Photonics West - Optoelectronic Materials and Devices.
[43] James K. Guest,et al. Topology optimization of continuum structures under uncertainty – A Polynomial Chaos approach , 2012 .
[44] Mattias Schevenels,et al. Efficient reanalysis techniques for robust topology optimization , 2012 .
[45] Ole Sigmund,et al. High-performance slow light photonic crystal waveguides with topology optimized or circular-hole based material layouts , 2012 .
[46] Nozomu Kogiso,et al. Robust Topology Optimization for Compliant Mechanisms Considering Uncertainty of Applied Loads , 2008 .
[47] James K. Guest,et al. Optimizing multifunctional materials: Design of microstructures for maximized stiffness and fluid permeability , 2006 .
[48] Ole Sigmund,et al. Time domain topology optimization of 3D nanophotonic devices , 2014 .
[49] Pierre Kornprobst,et al. Mathematical problems in image processing - partial differential equations and the calculus of variations , 2010, Applied mathematical sciences.
[50] T. K. Kundra,et al. Additive Manufacturing Technologies , 2018 .
[51] Ole Sigmund,et al. Topology optimization of piezo modal transducers with null-polarity phases , 2016 .
[52] H. P. Mlejnek,et al. Some aspects of the genesis of structures , 1992 .
[53] Shengli Xu,et al. Volume preserving nonlinear density filter based on heaviside functions , 2010 .
[54] O. Sigmund,et al. Minimum length scale in topology optimization by geometric constraints , 2015 .
[55] Annett Wechsler,et al. Optimization And Anti Optimization Of Structures Under Uncertainty , 2016 .
[56] J. Lógó,et al. Optimal Topologies in Case of Probabilistic Loading: The Influence of Load Correlation , 2009 .
[57] Mu Zhu,et al. Casting and Milling Restrictions in Topology Optimization via Projection-Based Algorithms , 2012, DAC 2012.
[58] M. Bendsøe,et al. Generating optimal topologies in structural design using a homogenization method , 1988 .
[59] Ken Doyle,et al. Bioprinting: From Patches to Parts , 2014 .
[60] Dan M. Frangopol,et al. Reliability-based design of MEMS mechanisms by topology optimization , 2003 .
[61] Xiaoming Wang,et al. A level set method for structural topology optimization , 2003 .
[62] James K. Guest,et al. Reducing dimensionality in topology optimization using adaptive design variable fields , 2010 .
[63] Gilles A. Francfort,et al. A Numerical Algorithm for Topology and Shape Optimization , 1993 .
[64] Wei Chen,et al. Level set based robust shape and topology optimization under random field uncertainties , 2010, DAC 2009.
[65] Anton Evgrafov,et al. On Chebyshev’s method for topology optimization of Stokes flows , 2015 .
[66] Han Ding,et al. Nonlinear diffusions in topology optimization , 2004 .
[67] Ole Sigmund,et al. Manufacturing tolerant topology optimization , 2009 .
[68] Boyan Stefanov Lazarov,et al. On multigrid-CG for efficient topology optimization , 2014 .
[69] O. Sigmund,et al. Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.
[70] M. Bendsøe,et al. Material interpolation schemes in topology optimization , 1999 .
[71] C. Ross,et al. Optimizing topographical templates for directed self-assembly of block copolymers via inverse design simulations. , 2014, Nano letters.
[72] M. Zhou,et al. PROGRESS IN TOPOLOGY OPTIMIZATION WITH MANUFACTURING CONSTRAINTS , 2002 .
[73] Jihong Zhu,et al. Some Recent Advances in the Integrated Layout Design of Multicomponent Systems , 2011 .
[74] Oded Amir,et al. Revisiting approximate reanalysis in topology optimization: on the advantages of recycled preconditioning in a minimum weight procedure , 2015 .
[75] H. Rodrigues,et al. Numerical modeling of bone tissue adaptation--a hierarchical approach for bone apparent density and trabecular structure. , 2009, Journal of Biomechanics.
[76] Lena Lee. Automating the Cell Counting Process , 2014 .
[77] Y. Xie,et al. A simple evolutionary procedure for structural optimization , 1993 .
[78] James K. Guest,et al. Optimizing the layout of discrete objects in structures and materials: A projection-based topology optimization approach , 2015 .
[79] A. Chambolle,et al. Design-dependent loads in topology optimization , 2003 .
[80] Jakob S. Jensen,et al. Design of materials with prescribed nonlinear properties , 2014 .
[81] Christopher B. Williams,et al. Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing , 2014 .
[82] John R. Tumbleston,et al. Continuous liquid interface production of 3D objects , 2015, Science.
[83] Ole Sigmund,et al. Topology optimization for optical projection lithography with manufacturing uncertainties. , 2014, Applied optics.
[84] Junpeng Zhao,et al. Robust topology optimization under loading uncertainty based on linear elastic theory and orthogonal diagonalization of symmetric matrices , 2014 .
[85] O. Sigmund,et al. Topology optimization of coated structures and material interface problems , 2015 .
[86] Geert Lombaert,et al. Topology optimization of fail-safe structures using a simplified local damage model , 2014 .
[87] J. Petersson,et al. Topology optimization using regularized intermediate density control , 2001 .
[88] Ole Sigmund,et al. Topological design of electromechanical actuators with robustness toward over- and under-etching , 2013 .
[89] Michael Yu Wang,et al. Engineering feature design for level set based structural optimization , 2013, Comput. Aided Des..
[90] James K. Guest,et al. Permeability measurements and modeling of topology-optimized metallic 3-D woven lattices , 2014 .
[91] M. Gu,et al. Two-photon polymerisation for three-dimensional micro-fabrication , 2006 .
[92] Mattias Schevenels,et al. On the similarities between micro/nano lithography and topology optimization projection methods , 2013 .
[93] Kurt Maute,et al. Level-set methods for structural topology optimization: a review , 2013 .
[94] M. Stolpe,et al. Benchmarking optimization solvers for structural topology optimization , 2015 .
[95] A. Evgrafov. State space Newton’s method for topology optimization , 2014 .
[96] Martin Wegener,et al. Tailored 3D Mechanical Metamaterials Made by Dip‐in Direct‐Laser‐Writing Optical Lithography , 2012, Advanced materials.
[97] A. Clausen. Topology Optimization for Additive Manufacturing , 2016 .
[98] Erik Lund,et al. Thickness filters for gradient based multi-material and thickness optimization of laminated composite structures , 2015 .
[99] G. Allaire,et al. Thickness control in structural optimization via a level set method , 2016, Structural and Multidisciplinary Optimization.
[100] T. Shi,et al. Constraints of distance from boundary to skeleton: For the control of length scale in level set based structural topology optimization , 2015 .
[101] Jihong Zhu,et al. Structural design of aircraft skin stretch-forming die using topology optimization , 2013, J. Comput. Appl. Math..
[102] B. Bourdin. Filters in topology optimization , 2001 .
[103] K. Svanberg. The method of moving asymptotes—a new method for structural optimization , 1987 .
[104] O. Sigmund,et al. Topology optimization considering material and geometric uncertainties using stochastic collocation methods , 2012 .
[105] Mohammad Ali Mohammad,et al. Fundamentals of Electron Beam Exposure and Development , 2012 .
[106] Jakob S. Jensen,et al. Interpolation scheme for fictitious domain techniques and topology optimization of finite strain elastic problems , 2014 .
[107] C. Mack. Fundamental principles of optical lithography : the science of microfabrication , 2007 .
[108] Reinhold Steinhauser,et al. Application of vector performance optimization to a robust control loop design for a fighter aircraft , 1983 .
[109] David W. Rosen,et al. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .
[110] Bernhard Sendhoff,et al. Robust Optimization - A Comprehensive Survey , 2007 .
[111] Lothar Harzheim,et al. A review of optimization of cast parts using topology optimization , 2005 .
[112] C. S. Jog,et al. Stability of finite element models for distributed-parameter optimization and topology design , 1996 .
[113] Krister Svanberg,et al. Density filters for topology optimization based on the Pythagorean means , 2013 .
[114] Peter Greil,et al. Additive Manufacturing of Ceramic‐Based Materials , 2014 .
[115] Ramana V. Grandhi,et al. A survey of structural and multidisciplinary continuum topology optimization: post 2000 , 2014 .
[116] Satoshi Kawata,et al. Finer features for functional microdevices , 2001, Nature.
[117] B. Lazarov,et al. Parallel framework for topology optimization using the method of moving asymptotes , 2013 .
[118] G. Michailidis. Manufacturing Constraints and Multi-Phase Shape and Topology Optimization via a Level-Set Method , 2014 .
[119] Qian Wang,et al. Review of formulations for structural and mechanical system optimization , 2005 .
[120] Mitsuru Kitamura,et al. Porous composite with negative thermal expansion obtained by photopolymer additive manufacturing , 2015, 1504.07724.
[121] Xiaoming Wang,et al. A feature-based topological optimization for structure design , 2008, Adv. Eng. Softw..
[122] Ole Sigmund,et al. Design of robust and efficient photonic switches using topology optimization , 2012 .
[123] I. Ashcroft,et al. Topology Optimization for Additive Manufacturing , 2011 .
[124] Julián A. Norato,et al. Stress-based topology optimization for continua , 2010 .
[125] A. Neureuther,et al. Modeling projection printing of positive photoresists , 1975, IEEE Transactions on Electron Devices.
[126] Xu Guo,et al. Explicit feature control in structural topology optimization via level set method , 2014 .
[127] O. Sigmund. Morphology-based black and white filters for topology optimization , 2007 .
[128] Wei Chen,et al. A new level-set based approach to shape and topology optimization under geometric uncertainty , 2011 .
[129] S. Yamasaki,et al. Heaviside projection based topology optimization by a PDE-filtered scalar function , 2011 .
[130] Peter D. Dunning,et al. Robust Topology Optimization: Minimization of Expected and Variance of Compliance , 2013 .
[131] Mattias Schevenels,et al. Topology optimization with geometric uncertainties by perturbation techniques , 2012 .
[132] O. SIAMJ.,et al. A CLASS OF GLOBALLY CONVERGENT OPTIMIZATION METHODS BASED ON CONSERVATIVE CONVEX SEPARABLE APPROXIMATIONS∗ , 2002 .
[133] Robert M. Freund,et al. Fabrication-Adaptive Optimization with an Application to Photonic Crystal Design , 2013, Oper. Res..
[134] Mattias Schevenels,et al. Robust design of large-displacement compliant mechanisms , 2011 .
[135] Kurt Maute,et al. Topology Optimization under Uncertainty , 2014 .
[136] Zheng Cui,et al. Nanofabrication: Principles, Capabilities and Limits , 2008 .
[137] J. Z. Zhu,et al. The finite element method , 1977 .
[138] Boyan Stefanov Lazarov,et al. Maximum length scale in density based topology optimization , 2017 .
[139] Xu Guo,et al. An explicit length scale control approach in SIMP-based topology optimization , 2014 .
[140] Kurt Maute,et al. Large-scale parallel topology optimization using a dual-primal substructuring solver , 2008 .
[141] Boyan Stefanov Lazarov,et al. Topology optimization using PETSc: An easy-to-use, fully parallel, open source topology optimization framework , 2015 .
[142] M. Bendsøe,et al. Topology Optimization: "Theory, Methods, And Applications" , 2011 .
[143] L. Trefethen. Spectral Methods in MATLAB , 2000 .
[144] James K. Guest,et al. Achieving minimum length scale in topology optimization using nodal design variables and projection functions , 2004 .
[145] Les A. Piegl,et al. Ten challenges in 3D printing , 2015, Engineering with Computers.
[146] Hugues Talbot,et al. Mathematical Morphology: from theory to applications , 2013 .
[147] James K. Guest,et al. Design of Multifunctional Material Structures Using Topology Optimization with Feature Control , 2011 .
[148] James K. Guest,et al. Eliminating beta-continuation from Heaviside projection and density filter algorithms , 2011 .
[149] O. Sigmund,et al. Design of manufacturable 3D extremal elastic microstructure , 2014 .
[150] P. Vassilevski. Multilevel Block Factorization Preconditioners: Matrix-based Analysis and Algorithms for Solving Finite Element Equations , 2008 .
[151] Lorenz T. Biegler,et al. On the implementation of an interior-point filter line-search algorithm for large-scale nonlinear programming , 2006, Math. Program..
[152] O. Sigmund,et al. Robust topology optimization accounting for spatially varying manufacturing errors , 2011 .
[153] James K. Guest,et al. Imposing maximum length scale in topology optimization , 2009 .
[154] Yongsheng Ma,et al. 3D level-set topology optimization: a machining feature-based approach , 2015 .
[155] Toby P. Breckon,et al. Fundamentals of Digital Image Processing: A Practical Approach with Examples in Matlab , 2011 .
[156] Timothy A. Brunner,et al. Approximate models for resist processing effects , 1996, Advanced Lithography.
[157] Leslie Greengard,et al. A fast algorithm for particle simulations , 1987 .
[158] H. Rodrigues,et al. Hierarchical optimization of material and structure , 2002 .
[159] R. Ghanem,et al. Stochastic Finite Elements: A Spectral Approach , 1990 .
[160] Yaoyu Cao,et al. Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size , 2013, Nature Communications.
[161] Abdelkhalak El Hami,et al. Reliability‐Based Topology Optimization , 2013 .
[162] Amyn Poonawala,et al. Mask Design for Optical Microlithography—An Inverse Imaging Problem , 2007, IEEE Transactions on Image Processing.
[163] Eddie Wadbro,et al. Shape and topology optimization of an acoustic horn-lens combination , 2010, J. Comput. Appl. Math..
[164] O. Sigmund,et al. On reducing computational effort in topology optimization: how far can we go? , 2011 .
[165] R. Kohn,et al. Topology optimization and optimal shape design using homogenization , 1993 .
[166] Michael McDonald,et al. Fundamentals of Modern Manufacturing: Materials, Processes and Systems , 2016 .
[167] Casper Schousboe Andreasen,et al. An explicit parameterization for casting constraints in gradient driven topology optimization , 2011 .
[168] Christopher B. Williams,et al. Topology Optimization for Additive Manufacturing: Considering Maximum Overhang Constraint , 2014 .