A study on low magnetic permeability gas tungsten arc weldment of AISI 316LN stainless steel for application in electron accelerator

Abstract Low magnetic permeability is an important criterion in selection of the material of construction of beam pipes and vacuum chambers of electron accelerators for safeguarding against distortion of the magnetic field. In the modified design of new 20 MeV/30 mA Injector Microtron for the existing synchrotron radiation sources Indus-1 and Indus-2, AISI 316 LN stainless steel has been identified as the material of construction of its vacuum chamber. Welding of AISI 316LN stainless steel with conventional filler alloys like ER316L and ER317L of AWS A5.9 produces duplex weld metal with 3–8% ferro-magnetic delta ferrite to avoid solidification cracking. The results of the study has demonstrated that GTAW of AISI 316LN SS with high Mn adaptation of W 18 16 5 N L filler produced a crack free non-magnetic weld with acceptable mechanical properties. Moreover, AISI 316LN stainless steel is not required to be solution annealed after the final forming operation for obtaining a low magnetic permeability, thereby avoiding solution annealing of large vacuum chamber in vacuum/controlled atmosphere furnace and associated problems of distortion. Besides Injector Microtron, the study also provides useful input for design of future indigenous accelerators with vacuum chambers of austenitic stainless steel.

[1]  W. Theisen,et al.  Influence of machining-induced martensite on hydrogen-assisted fracture of AISI type 304 austenitic , 2011 .

[2]  Tadashi Matsumoto,et al.  Effect of low-melting-point eutectic on solidification cracking susceptibility of boron-added AISI 304 stainless steel welds , 1995 .

[3]  I. Vasserman,et al.  MAGNETIC PROPERTIES OF UNDULATOR VACUUM CHAMBER MATERIALS FOR THE LINAC COHERENT LIGHT SOURCE , 2005 .

[4]  P. Haušild,et al.  Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel , 2010 .

[5]  Tadashi Matsumoto,et al.  Hot cracking susceptibility of boron modified AISI 304 austenitic stainless steel welds , 1992 .

[6]  D. J. Kotecki,et al.  WRC-1992 constitution diagram for stainless steel weld metals : a modification of the WRC-1988 diagram , 1992 .

[7]  I. Masumoto,et al.  Hot Cracking of Austenitic Steel Weld Metal , 1972 .

[8]  Development of an austenitic structural steel , 2005 .

[9]  Erich Folkhard.  Welding Metallurgy of Stainless Steels , 1988 .

[10]  N. Suutala,et al.  The relationship between solidification and microstructure in austenitic and austenitic-ferritic stainless steel welds , 1979 .

[11]  Vivekanand Kain,et al.  Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking , 2010 .

[12]  H. Kikuchi,et al.  Martensitic transformation in SUS 316LN austenitic stainless steel at RT , 2008 .

[13]  H. Boer Rookhuizen,et al.  Mechanical design philosophy and construction of the Amsterdam Pulse Stretcher ring AmPS , 1992 .

[14]  Andreas Anayiotos,et al.  Comparative MRI compatibility of 316 L stainless steel alloy and nickel-titanium alloy stents. , 2002, Journal of cardiovascular magnetic resonance : official journal of the Society for Cardiovascular Magnetic Resonance.

[15]  V. Shankar,et al.  Solidification cracking in austenitic stainless steel welds , 2003 .

[16]  N. Wilson,et al.  Magnetic permeability of stainless steel for use in accelerator beam transport systems , 1991, Conference Record of the 1991 IEEE Particle Accelerator Conference.

[17]  T. Siewert,et al.  Welding Consumable Development for a Cryogenic (4 K) Application , 1999 .

[18]  R. Saluja,et al.  THE EMPHASIS OF PHASE TRANSFORMATIONS AND ALLOYING CONSTITUENTS ON HOT CRACKING SUSCEPTIBILITY OF TYPE 304L AND 316L STAINLESS STEEL WELDS , 2012 .