A highly efficient and linear 15 GHz GaN power amplifier design for 5G communications

A highly efficient two-stage 15 GHz fully-integrated GaN power amplifier (PA) designed for 5G communication is reported. SPICE simulations show this two-stage PA achieves an output 1 dB compression POUT, 1dB = 32.2 dBm with 28.2 dB gain and 30.0% PAE (power-added efficiency) for CW operation at 15 GHz. Its PAE reaches 38.7% at POUT = 34.0 dBm with a gain of 22.0 dB. Simulations also suggest that dynamic supply modulation from 28 V to 10 V may modestly improve the PA's efficiency at power back-off. When the PA is driven with 5/10/20 MHz LTE 16QAM modulated signals, the simulated output spectra and adjacent channel leakage ratio (ACLR) at POUT, 1dB = 32.2 dBm passed the LTE spectrum emission mask (SEM) without any predistortion (Pin = 4dBm), and the wider modulated signal bandwidth from 5 MHz to 20 MHz does not noticeably worsen the PA linearity. State-of-the-art literature survey suggests this highly efficient and linear GaN PA may be quite attractive for 5G PA applications at 15 GHz.

[1]  D. Y. C. Lie,et al.  “RF-SoC”: Integration Trends of On-Chip CMOS Power Amplifier: Benefits of External PA versus Integrated PA for Portable Wireless Communications , 2010 .

[2]  James J. Komiak,et al.  Microwave and millimeter wave power amplifiers: Technology, applications, benchmarks, future trends , 2016, 2016 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT).

[3]  Peter Asbeck,et al.  15 GHz 25 dBm multigate-cell stacked CMOS power amplifier with 32 % PAE and ≥ 30 dB gain for 5G applications , 2016, 2016 11th European Microwave Integrated Circuits Conference (EuMIC).

[4]  Norhapizin Kushairi,et al.  15 GHz medium power amplifier design based On 0.15 μm p-HEMT GaAs technology for wideband applications , 2013, RSM 2013 IEEE Regional Symposium on Micro and Nanoelectronics.

[6]  Gin-Kou Ma,et al.  Design of Highly Efficient Wideband RF Polar Transmitters Using the Envelope-Tracking Technique , 2009, IEEE Journal of Solid-State Circuits.

[7]  Zoya Popovic,et al.  GaN power amplifiers with supply modulation , 2015, 2015 IEEE MTT-S International Microwave Symposium.

[8]  J. Lopez,et al.  High-efficiency silicon RF power amplifier design – current status and future outlook , 2016, 2016 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT).

[9]  Tomoya Kaneko,et al.  GaN HEMT high efficiency power amplifiers for 4G/5G mobile communication base stations , 2014, 2014 Asia-Pacific Microwave Conference.

[10]  Keigo Nakatani,et al.  A highly integrated RF frontend module including Doherty PA, LNA and switch for high SHF wide-band massive MIMO in 5G , 2017, 2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR).

[11]  Kohei Fujii,et al.  High power, fully integrated SMT amplifiers with +47dBm OIP3 at 15 GHz and 6W, 38% efficiency at 30GHz using low cost, high volume PHEMT , 2010, The 5th European Microwave Integrated Circuits Conference.