Anthropocentric Approach for Smart Assembly: Integration and Collaboration

Recently, anthropocentric or human-centric approaches renewed its importance in smart manufacturing especially for assembly applications where human dexterity and informal knowledge are dispensable at present and in the near future. This paper analyzes the integration, design, and collaboration issues regarding anthropocentric researches in the past few years mainly in assembly domain. First of all, towards closed-loop system integration, the researches on integrating human in the cyber-physical system are elaborated and summarized. Then, human-centric designs (HCD) especially in shop-floor assembly field are analyzed. To emphasize human-robot hybrid assembly, several related issues including collaboration paradigm, task planning and assignment, interaction interfaces, and safety are discussed. At last, a survey on human cognitive and social limitation management is elaborated. Related research challenges and directions are discussed.

[1]  Marcello Pellicciari,et al.  A comparative study on computer-integrated set-ups to design human-centred manufacturing systems , 2019, Robotics and Computer-Integrated Manufacturing.

[2]  Sotiris Makris,et al.  ROBO-PARTNER: Seamless Human-Robot Cooperation for Intelligent, Flexible and Safe Operations in the Assembly Factories of the Future☆ , 2014 .

[3]  Soundar R. T. Kumara,et al.  Cyber-physical systems in manufacturing , 2016 .

[4]  Sotiris Makris,et al.  Intuitive dual arm robot programming for assembly operations , 2014 .

[5]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[6]  Damien Trentesaux,et al.  Designing intelligent manufacturing systems through Human-Machine Cooperation principles: A human-centered approach , 2017, Comput. Ind. Eng..

[7]  Deniz Erdogmus,et al.  Human-inthe-Loop Cyber-Physical Systems , .

[8]  Weihua Sheng,et al.  Automated assembly skill acquisition and implementation through human demonstration , 2018, Robotics Auton. Syst..

[9]  Bogdan-Constantin Pirvu,et al.  Engineering insights from an anthropocentric cyber-physical system: A case study for an assembly station , 2016 .

[10]  Baoding Liu,et al.  Uncertain multilevel programming: Algorithm and applications , 2015, Comput. Ind. Eng..

[11]  Sotiris Makris,et al.  Application of Wearable Devices for Supporting Operators in Human-Robot Cooperative Assembly Tasks , 2018 .

[12]  Sotiris Makris,et al.  On a human-robot collaboration in an assembly cell , 2017, Int. J. Comput. Integr. Manuf..

[13]  Rainer Müller,et al.  Process-oriented Task Assignment for Assembly Processes with Human-robot Interaction , 2016 .

[14]  André Crosnier,et al.  Collaborative manufacturing with physical human–robot interaction , 2016 .

[15]  Fazel Ansari,et al.  A problem-solving ontology for human-centered cyber physical production systems , 2018, CIRP Journal of Manufacturing Science and Technology.

[16]  Robin Passama,et al.  A unified multimodal control framework for human-robot interaction , 2015, Robotics Auton. Syst..

[17]  Dario Antonelli,et al.  Qualification of a Collaborative Human-robot Welding Cell☆ , 2016 .

[18]  Sotiris Makris,et al.  Human–robot interaction review and challenges on task planning and programming , 2016, Int. J. Comput. Integr. Manuf..

[19]  Marcello Pellicciari,et al.  A framework to design a human-centred adaptive manufacturing system for aging workers , 2017, Adv. Eng. Informatics.

[20]  Damien Trentesaux,et al.  A Human-Centred Design to Break the Myth of the "Magic Human" in Intelligent Manufacturing Systems , 2015, SOHOMA.

[21]  Bogdan-Constantin Pirvu,et al.  Human-centred Assembly: A Case Study for an Anthropocentric Cyber-physical System , 2014 .

[22]  Laine Mears,et al.  A complementary Cyber-Human Systems framework for Industry 4.0 Cyber-Physical Systems , 2018 .

[23]  Frédéric Vanderhaegen,et al.  Towards increased systems resilience: New challenges based on dissonance control for human reliability in Cyber-Physical&Human Systems , 2017, Annu. Rev. Control..

[24]  László Monostori,et al.  ScienceDirect Variety Management in Manufacturing . Proceedings of the 47 th CIRP Conference on Manufacturing Systems Cyber-physical production systems : Roots , expectations and R & D challenges , 2014 .

[25]  Yue Wang,et al.  Mutual trust-based subtask allocation for human–robot collaboration in flexible lightweight assembly in manufacturing , 2018, Mechatronics.

[26]  Rainer Müller,et al.  Inspector Robot – A new collaborative testing system designed for the automotive final assembly line , 2014 .

[27]  Alexander Neb,et al.  Generation of AR-enhanced Assembly Instructions based on Assembly Features , 2018 .

[28]  Sotiris Makris,et al.  ROS Based Coordination of Human Robot Cooperative Assembly Tasks-An Industrial Case Study☆ , 2015 .

[29]  Sotiris Makris,et al.  Augmented Reality (AR) Applications for Supporting Human-robot Interactive Cooperation , 2016 .

[30]  Peigen Li,et al.  Toward New-Generation Intelligent Manufacturing , 2018 .

[31]  Lihui Wang,et al.  Human-robot collaboration – towards new metrics for selection of communication technologies , 2018 .

[32]  Rainer Müller,et al.  Inspector Robot – A New Collaborative Testing System Designed for the Automotive Final Assembly Line☆ , 2014 .

[33]  W. Marsden.  I and J , 2012 .

[34]  Sabine Pfeiffer,et al.  Robots, Industry 4.0 and Humans, or Why Assembly Work Is More than Routine Work , 2016 .

[35]  Lihui Wang,et al.  Vision-guided active collision avoidance for human-robot collaborations , 2013 .

[36]  George-Christopher Vosniakos,et al.  On Immersive Virtual Environments for Assessing Human-driven Assembly of Large Mechanical Parts☆ , 2017 .

[37]  Daniel W. Repperger,et al.  The Human Role in Automation , 2009, Handbook of Automation.

[38]  Alberto Poncela,et al.  Command-based voice teleoperation of a mobile robot via a human-robot interface , 2014, Robotica.

[39]  Nicholas Frick,et al.  Evaluation of the Human Error Probability in Cellular Manufacturing , 2016 .

[40]  Björn Johansson,et al.  A framework for operative and social sustainability functionalities in Human-Centric Cyber-Physical Production Systems , 2020, Comput. Ind. Eng..

[41]  Francesco Caputo,et al.  On the use of Virtual Reality for a human-centered workplace design , 2018 .

[42]  Jian Huang,et al.  An assembly strategy scheduling method for human and robot coordinated cell manufacturing , 2011, Int. J. Intell. Comput. Cybern..

[43]  Åsa Fast-Berglund,et al.  Towards a Human-Centred Reference Architecture for Next Generation Balanced Automation Systems: Human-Automation Symbiosis , 2015, APMS.

[44]  Ralph Bruder,et al.  User Centered Design of a Cyber-physical Support Solution for Assembly Processes , 2015 .

[45]  Dongbo Li,et al.  Evaluating the Maturity of CPS in discrete manufacturing shop-floor: A group AHP method with fuzzy grade approach , 2018 .

[46]  Horacio Ahuett-Garza,et al.  A brief discussion on the trends of habilitating technologies for Industry 4.0 and Smart manufacturing , 2018 .

[47]  Sotiris Makris,et al.  Dynamic scheduling of shared human-robot manufacturing operations , 2018 .

[48]  John Ahmet Erkoyuncu,et al.  Designing an AR interface to improve trust in Human-Robots collaboration , 2018 .

[49]  Rafiq Ahmad,et al.  Safe and Automated Assembly Process using Vision Assisted Robot Manipulator , 2016 .

[50]  Danna Zhou,et al.  d. , 1934, Microbial pathogenesis.

[51]  Petr Fiedler,et al.  Human-in-the-Loop Issue in Context of the Cyber-Physical Systems , 2018 .

[52]  Maneesh Kumar,et al.  A framework of integrating knowledge of human factors to facilitate HMI and collaboration in intelligent manufacturing , 2018 .

[53]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[54]  Carsten Wittenberg,et al.  Human-CPS Interaction - requirements and human-machine interaction methods for the Industry 4.0 , 2016 .

[55]  Tamio Arai,et al.  Assessment of operator stress induced by robot collaboration in assembly , 2010 .

[56]  Helmut Zaiser,et al.  Competences for Cyber-physical Systems in Manufacturing – First Findings and Scenarios , 2014 .

[57]  Nariaki Nishino,et al.  Adaptive automation and human factors in manufacturing: An experimental assessment for a cognitive approach , 2018 .

[58]  Sotiris Makris,et al.  A method for planning human robot shared tasks , 2018, CIRP Journal of Manufacturing Science and Technology.

[59]  Swu Yih,et al.  A simulation platform for human-machine interaction safety analysis of cyber-physical systems , 2018, International Journal of Industrial Ergonomics.

[60]  Christopher M. Schlick,et al.  Human-robot Cooperation in Future Production Systems: Analysis of Requirements for Designing an Ergonomic Work System☆ , 2015 .