A ply drop-off element for analysis of tapered laminated composites

A novel ply drop-off element has been developed for the analysis of tapered laminated composites. The element has the capability to accommodate the drop-off within the element. Therefore, drop-off need not lie along the nodal lines. As a result, drop-off location is independent of the mesh division. This facilitates the use of a coarse mesh at the ply drop location even when the stagger distance is very small. This element can be used in the global model without increasing the size of the global structural matrices. The stiffness matrix is developed by superimposing the stiffness matrices of all layers. Since the size of the dropped layer is different from the size of the element a special integration technique has been adopted for developing the stiffness matrices of dropped layers. In addition, a degenerated 1D drop-off element has been discussed. The 1D element can be used when the lateral dimension of the plate is high in comparison to longitudinal dimension. The validation of the proposed drop-off element has been carried out with the help of numerical examples.

[1]  Abhijit Mukherjee,et al.  Displacement and stress response of laminated beams and stiffened plates using a high-order element , 1994 .

[2]  Anthony J. Vizzini,et al.  Effect of ply-drop configuration on delamination strength of tapered composite structures , 1996 .

[3]  Aj Vizzini.  Influence of Realistic Ply-Drop Geometries on Interlaminar Stresses in Tapered Laminates , 1995 .

[4]  Abhijit Mukherjee,et al.  A PLY DROP-OFF ELEMENT FOR INCLUSION OF DROP-OFF IN THE GLOBAL ANALYSIS OF LAYERED COMPOSITE STRUCTURES , 1995 .

[5]  Brian L. Kemp,et al.  Response and failure analysis of a graphite-epoxy laminate containing terminating internal plies , 1985 .

[6]  E. Dill,et al.  Theory of Elasticity of an Anisotropic Elastic Body , 1964 .

[7]  Sung W. Lee,et al.  Delamination of tapered composite structures , 1989 .

[8]  K. Vijayaraju,et al.  An analytical study on 090 ply-drops in composite laminates , 1994 .

[9]  J.P.H. Webber,et al.  A design study into the delamination behaviour of tapered composites , 1994 .

[10]  Abhijit Mukherjee,et al.  Analysis of Tapered Laminated Composites with Non-Symmetric Lay-Up , 1997 .

[11]  C. Dávila,et al.  Analysis of delamination initiation in postbuckled dropped-ply laminates , 1963 .

[12]  Satish A. Salpekar,et al.  Strain-Energy-Release Rate Analysis of Delamination in a Tapered Laminate Subjected to Tension Load , 1991 .

[13]  James H. Starnes,et al.  Effect of dropped plies on the strength of graphite-epoxy laminates , 1987 .

[14]  Paul A. Lagace,et al.  Buckling and postbuckling of laminated composite plates with ply dropoffs , 1989 .

[15]  Michael R Wisnom,et al.  Delamination in Asymmetrically Tapered Composites Loaded in Tension , 1996 .

[16]  D. J. Wilkins.  A preliminary damage tolerance methodology for composite structures , 1983 .

[17]  Abhijit Mukherjee.  Free vibration of laminated beams and stiffened plates using a high-order element , 1991 .