Surface Integrity of Grinding of Bearing Steel GCr15 with CBN Wheels
暂无分享,去创建一个
Summary This paper gives the investigation on surface integrity of grinding of hardened bearing steel GCr15 with resin bonded cubic boron-nitride (CBN) wheels. CBN wheels, when well dressed, offer significant advantages compared with aluminium oxide wheels, especially at high metal-removal rates. The compressive residual stresses are only produced when CBN wheels are used, the harmful tensile residual stresses are formed very easily with aluminium oxide wheels. However, CBN wheels after dressing with SiC stick cannot get a good result, serious thermal damage and big surface roughness are induced on the ground surface. Two new dressing techniques— elastic dressing and ultrasonic vibration dressing have been advanced, they are successful in well dressing CBN wheels and make the wheels have a strong cutting capacity to obtain higher ground surface integrity. Our experiments show that in dry grinding of bearing steel GCr15 with CBN wheels boronization takes place, it can increase wear-resistance of the ground surface about 30%.
[1] G. Bellows. Low stress grinding for quality production , 1978 .
[2] S. Malkin,et al. Grinding of Steels with Cubic Boron Nitride (CBN) , 1984 .
[3] S. Malkin,et al. Current Trends in CBN Grinding Technology , 1985 .
[4] Ekkard Brinksmeier,et al. Determination of the Mechanical and Thermal Influences on Machined Surfaces by Microhardness and Residual Stress Analysis , 1980 .
[5] P. G. Althaus. Residual stresses in internal grinding , 1985 .