Interface limited charge extraction and recombination in organic photovoltaics

We report that the transit-time of photogenerated holes within an OPV device is significantly controlled by the interface between the photoactive layer and the electrode. We used time-resolved optical absorption spectroscopy to track the evolution and transport of photogenerated holes in situ within efficient PTB7:PC70BM (thieno [3,4-b] thiophene/benzodithiophene:[6,6]-phenyl C71-butyric acid methyl ester) devices. Our results demonstrate that the time required for 50% hole extraction is reduced from 2.3 μs for the standard devices to 0.9 μs either by introducing a thin layer of conjugated polyelectrolyte (CPE) layer at the electron-extracting cathode or simply by exposing the device to a polar solvent such as methanol which is used for spin coating the CPEs. We consider that the CPE modifies the interface between the photoactive layer and the cathode whereas the exposure of the device to associated polar solvent modifies the buried PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate) hole extracting layer.

[1]  James R. Durrant,et al.  Materials Design Considerations for Charge Generation in Organic Solar Cells , 2014 .

[2]  Andrés J. García,et al.  ITO Interface Modifiers Can Improve VOC in Polymer Solar Cells and Suppress Surface Recombination , 2013 .

[3]  R. Friend,et al.  The role of spin in the kinetic control of recombination in organic photovoltaics , 2013, Nature.

[4]  Zhe Li,et al.  Voltage-dependent photocurrent transients of PTB7:PC70BM solar cells: Experiment and numerical simulation , 2013 .

[5]  R. Friend,et al.  Donor–acceptor interface modification by zwitterionic conjugated polyelectrolytes in polymer photovoltaics , 2013 .

[6]  A. Heeger,et al.  High‐Efficiency Polymer Solar Cells Enhanced by Solvent Treatment , 2013, Advanced materials.

[7]  K. Ho,et al.  Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells , 2012 .

[8]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[9]  G. Bazan,et al.  Post‐Deposition Treatment of an Arylated‐Carbazole Conjugated Polymer for Solar Cell Fabrication , 2012, Advanced materials.

[10]  Edward H. Sargent,et al.  Materials interface engineering for solution-processed photovoltaics , 2012, Nature.

[11]  A. Rao,et al.  Exciton‐Charge Annihilation in Organic Semiconductor Films , 2012 .

[12]  Talha M. Khan,et al.  A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics , 2012, Science.

[13]  Myung-Han Yoon,et al.  Significant vertical phase separation in solvent-vapor-annealed poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) composite films leading to better conductivity and work function for high-performance indium tin oxide-free optoelectronics. , 2012, ACS applied materials & interfaces.

[14]  David Beljonne,et al.  The Role of Driving Energy and Delocalized States for Charge Separation in Organic Semiconductors , 2012, Science.

[15]  Yong Cao,et al.  Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells , 2011, Advanced materials.

[16]  Jenny Nelson,et al.  Non‐Geminate Recombination as the Primary Determinant of Open‐Circuit Voltage in Polythiophene:Fullerene Blend Solar Cells: an Analysis of the Influence of Device Processing Conditions , 2011 .

[17]  A. Heeger,et al.  Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer. , 2011, Journal of the American Chemical Society.

[18]  R. Friend,et al.  The Binding Energy of Charge-Transfer Excitons Localized at Polymeric Semiconductor Heterojunctions , 2011 .

[19]  C. Brabec,et al.  Influence of blend microstructure on bulk heterojunction organic photovoltaic performance. , 2011, Chemical Society reviews.

[20]  R. Friend,et al.  Conjugated zwitterionic polyelectrolyte as the charge injection layer for high-performance polymer light-emitting diodes. , 2011, Journal of the American Chemical Society.

[21]  Thomas Strobel,et al.  Role of the Charge Transfer State in Organic Donor–Acceptor Solar Cells , 2010, Advanced materials.

[22]  Robert A. Street,et al.  Experimental test for geminate recombination applied to organic solar cells , 2010 .

[23]  Robert A. Street,et al.  Interface state recombination in organic solar cells , 2010 .

[24]  R. Friend,et al.  Subnanosecond geminate charge recombination in polymer-polymer photovoltaic devices. , 2010, Physical review letters.

[25]  Tracey M. Clarke,et al.  Charge photogeneration in organic solar cells. , 2010, Chemical reviews.

[26]  Olle Inganäs,et al.  On the origin of the open-circuit voltage of polymer-fullerene solar cells. , 2009, Nature materials.

[27]  C. Deibel,et al.  Origin of reduced polaron recombination in organic semiconductor devices , 2009, 0907.2428.

[28]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[29]  Valentin D. Mihailetchi,et al.  Device Physics of Polymer:Fullerene Bulk Heterojunction Solar Cells , 2007 .

[30]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[31]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[32]  C. Brabec,et al.  Origin of the Open Circuit Voltage of Plastic Solar Cells , 2001 .

[33]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[34]  C. A. Walsh,et al.  Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.