Active load modules for W-band radiometer calibration

An active cold load (ACL) and an active hot load (AHL) circuit were developed in W-band (75 - 110 GHz) and manufactured in IAF's metamorphic high electron mobility transistor (mHEMT) technology. The millimeter-wave monolithic integrated circuits (MMICs) were radiometricly characterized with a dedicated hot cold on wafer noise measurement setup and packaged into waveguide modules. The active load modules were then again characterized, to be used as reference loads in radiometry systems with switching front-ends [1].

[1]  F. Giannini,et al.  Analysis, Design and Measurement of Active Low-Noise Terminations , 2008, 2008 14th Conference on Microwave Techniques.

[2]  Niels Skou,et al.  Measurements on Active Cold Loads for Radiometer Calibration , 2008, IEEE Transactions on Geoscience and Remote Sensing.

[3]  Matthias Seelmann-Eggebert,et al.  A versatile and cryogenic mHEMT-model including noise , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[4]  Lawrence P. Dunleavy,et al.  Stability measurements on noise sources , 2001, IEEE Trans. Instrum. Meas..

[5]  L. Escotte,et al.  SiGe HBT-Based Active Cold Load for Radiometer Calibration , 2010, IEEE Microwave and Wireless Components Letters.

[6]  A. Leuther,et al.  Metamorphic HEMT technology for low-noise applications , 2009, 2009 IEEE International Conference on Indium Phosphide & Related Materials.

[7]  S.M. Lardizabal,et al.  Design and characterization of MMIC active cold loads , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[8]  Jean-Marc Goutoule,et al.  Long-term stability of an SiGe HBT-based active cold load , 2011, 2011 IEEE International Geoscience and Remote Sensing Symposium.

[9]  R. L. Forward,et al.  Electronically Cold Microwave Artificial Resistors , 1983 .

[10]  Arnulf Leuther,et al.  W-band radiometer system with switching front-end for multi-load calibration , 2011, 2011 IEEE International Geoscience and Remote Sensing Symposium.

[11]  R. Frater,et al.  An Active "Cold" Noise Source , 1981 .

[12]  A. Fejzuli,et al.  Design and characterization of FET based cold/hot noise sources , 1997, 1997 IEEE MTT-S International Microwave Symposium Digest.