Effect of sand grain size and sand-to-cement ratio on the interfacial bond strength of steel fibers embedded in mortars

[1]  Dong Joo Kim,et al.  Influence of sand to coarse aggregate ratio on the interfacial bond strength of steel fibers in concrete for nuclear power plant , 2012 .

[2]  Dong-Joo Kim,et al.  Effect of grain size on the mechanical properties and crack formation of HPFRCC containing deformed steel fibers , 2012 .

[3]  François Toutlemonde,et al.  The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques , 2008 .

[4]  Mahalia Miller,et al.  Surface Roughness Criteria for Cement Paste Nanoindentation , 2008 .

[5]  Jong-Bin Park,et al.  Characteristics of cement mortar with nano-SiO2 particles , 2007 .

[6]  Y. Chan,et al.  Effect of silica fume on steel fiber bond characteristics in reactive powder concrete , 2004 .

[7]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[8]  F. Ulm,et al.  On the use of nanoindentation for cementitious materials , 2003 .

[9]  Antoine E. Naaman,et al.  Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites , 2003 .

[10]  G. Rao,et al.  Long-term drying shrinkage of mortar - influence of silica fume and size of fine aggregate , 2001 .

[11]  Mark Alexander,et al.  A review of the work of the RILEM TC 159-ETC: Engineering of the interfacial transition zone in cementitious composites , 2000 .

[12]  Antoine E. Naaman,et al.  EFFECT OF MORTAR FINENESS AND ADHESIVE AGENTS ON PULLOUT RESPONSE OF STEEL FIBERS , 2000 .

[13]  M. Pigeon,et al.  Influence of key parameters on drying shrinkage of cementitious materials , 1999 .

[14]  Will Hansen,et al.  Pullout behavior of steel fibers from cement-based composites , 1997 .

[15]  Henrik Stang,et al.  Significance of shrinkage-induced clamping pressure in fiber-matrix bonding in cementitious composite materials , 1996 .

[16]  S. Mindess,et al.  The effect of processing on the bond and interfaces in steel fiber reinforced cement composites , 1996 .

[17]  T Sedran,et al.  Optimization of ultra-high-performance concrete by the use of a packing model , 1994 .