论文信息 - Ablation properties of C/C–SiC composites tested on an arc heater - 字舞流文

Ablation properties of C/C–SiC composites tested on an arc heater

Hongbo Zhang | X. Xiong | Jian Yin | Huijin Tao | Jin-lü Zuo

[1] X. Xiong,et al. Microstructure and tribological properties of 3D needle-punched C/C–SiC brake composites , 2010 .

[2] J. Michałowski,et al. A microstructural study of carbon–carbon composites impregnated with SiC filaments , 2010 .

[3] Huang Bai-yun,et al. Influence factors of C/C–SiC dual matrix composites prepared by reactive melt infiltration , 2009 .

[4] Sida Jiang,et al. Study on controlling thermal expansion coefficient of ZrO2–TiO2 ceramic die for superplastic blow-forming high accuracy Ti–6Al–4V component , 2009 .

[5] Zhaofeng Chen,et al. Morphology and microstructure of 2.5 dimension C/SiC composites ablated by oxyacetylene torch , 2009 .

[6] V. Srivastava,et al. Effect of oxidation on elastic modulus of C/C–SiC composites , 2008 .

[7] M. Hofmann,et al. Non-destructive testing of satellite nozzles made of carbon fibre ceramic matrix composite, C/SiC , 2007 .

[8] Ke Yang,et al. Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler , 2006 .

[9] Hongbo Zhang,et al. Microstructure and ablation performances of dual-matrix carbon/carbon composites , 2006 .

[10] Yongdong Xu,et al. Effect of carbon interlayer on oxidation behavior of C/SiC composites with a coating from room temperature to 1500°C , 2001 .

[11] X. Bourrat,et al. Silicon carbide infiltration of porous CC composites for improving oxidation resistance , 1995 .