Determining directional emissivity: Numerical estimation and experimental validation by using infrared thermography

Abstract Little research has examined that inaccurate estimations of directional emissivity form a major challenge during both passive and active thermographic measurements. Especially with the increasing use of complex curved shapes and the growing precision of thermal cameras, these errors limit the accuracy of the thermal measurements. In this work we developed a technique to estimate the directional emissivity using updated numerical simulations. The reradiation on concave surfaces is examined by thermal imaging of a homogeneous heated curved metal and nylon test sample. We used finite element modelling to predict the reradiation of concave structures in order to calculate the parameters of an approximating formula for the emissivity dependent on the angle to the normal vector on each element. The differences between experimental and numerical results of the steel test sample are explained using electron microscopy imaging and the validation on different materials. The results suggest that it is possible to determine the errors of thermal imaging testing of complex shapes using a numerical model.

[1]  Michael Vollmer,et al.  Infrared Thermal Imaging: Fundamentals, Research and Applications , 2010 .

[2]  Vladimir P. Vavilov,et al.  Thermal NDT: historical milestones, state-of-the-art and trends , 2014 .

[3]  The use of generalized configuration factors for calculating the radiant interchange between nondiffuse surfaces , 1997 .

[4]  António Araújo,et al.  Monte Carlo uncertainty simulation of surface emissivity at ambient temperature obtained by dual spectral infrared radiometry , 2014 .

[5]  I. H. Marshall,et al.  Thermography as a tool for damage assessment , 2005 .

[6]  V. Rammohan Rao,et al.  Efficient evaluation of diffuse view factors for radiation , 1996 .

[7]  R. Birkebak,et al.  Effects of Roughness of Metal Surfaces on Angular Distribution of Monochromatic Reflected Radiation , 1965 .

[8]  R. Goulard,et al.  Reflection from a Periodic Dielectric Surface , 1967 .

[9]  L. Salvi,et al.  Preliminary Pulsed Phase Thermography analysis on cylindrical geometry , 2014 .

[10]  Zun-lue Zhu,et al.  Modeling the effect of surface oxidation on the normal spectral emissivity of steel 316L at 1.5 μm over the temperatures ranging from 800 to 1100 K in air , 2015 .

[11]  Fundamentals of Differential Equations and Boundary Value Problems, 6th Edition , 1993 .

[12]  Bart Ribbens,et al.  Updating a finite element model to the real experimental setup by thermographic measurements and adaptive regression optimization , 2015 .

[13]  M. Saillard,et al.  Scattering from rough inhomogeneous media: splitting of surface and volume scattering. , 2002, Journal of the Optical Society of America. A, Optics, image science, and vision.

[15]  Jean-Jacques Greffet,et al.  Influence of microroughness on emissivity , 2004 .

[16]  K. Torrance,et al.  Biangular reflectance of an electric nonconductor as a function of wavelength and surface roughness , 1965 .