Optimization of spray drying process for Bi-2223 precursor powders fabrication

[1]  Ping-xiang Zhang,et al.  Influences of Pb content on the critical current of Bi-2223 multi-filamentary tapes , 2016 .

[2]  T. Takao,et al.  Combination of high hoop stress tolerance and a small screening current-induced field for an advanced Bi-2223 conductor coil at 4.2 K in an external field , 2015 .

[3]  D. Yoon,et al.  Synthesis and Characterization of Bi1.6Pb0.4Sr2Ca2Cu3O7 Superconducting Oxide by High-Energy Milling , 2015 .

[4]  Haibo Sun,et al.  The Influences of Powder Processing Variables on the Properties of Bi-2223/Ag Tapes , 2013, IEEE Transactions on Applied Superconductivity.

[5]  S. Yamaguchi,et al.  Critical Current and Its Magnetic Field Effect Measurement of HTS Tapes Forming DC Superconducting Cable , 2011, IEEE Transactions on Applied Superconductivity.

[6]  X. P. Chen,et al.  Critical current enhancement in Bi-2223/Ag superconducting tapes by controlling its first sintering process , 2011 .

[7]  F. Rizzo,et al.  Characterization and phase transitions of (Bi,Pb)2Sr2Ca2Cu3Ox–Ag composite powder obtained by spray pyrolysis , 2005 .

[8]  Sunghwan Kim,et al.  The fabrication of fine and homogenous Bi-2223 precursor powder by a spray pyrolysis process , 2004 .

[9]  S. Choe,et al.  Effect of starting precursor powders on microstructural development and critical current density properties of BSCCO 2223 tapes , 2003 .

[10]  Ping-xiang Zhang,et al.  Enhanced the flux pinning in Bi-2223/Ag by induced Cr-ion defects , 2003 .

[11]  S. Dou,et al.  Addition of nanometer SiC in the silver-sheathed Bi2223 superconducting tapes , 1999 .

[12]  J. Ko,et al.  Microstructure and phase evolution of ultrafine MgO doped Bi-2223/Ag tapes , 1997 .

[13]  S. Dou,et al.  Fabrication of Ag sheathed Bi2223 tape with supercold rolling process , 1997 .

[14]  M. Fukutomi,et al.  A New High-Tc Oxide Superconductor without a Rare Earth Element , 1988 .