Facilitating structural stability of the Li-rich layered cathode materials by cation rearrangements and Li vacancies

[1]  Yong‐Sheng Hu,et al.  High-Capacity Oxide Cathode beyond 300 mAh/g , 2023, ACS Energy Letters.

[2]  Faqiang Li,et al.  Simple and Ingenious Manner To Build Li-Rich Layered Materials with Surface Layered/Spinel Heterostructures and Li Deficiencies , 2023, Energy & Fuels.

[3]  Y. Qiu,et al.  Role of Substitution Elements in Enhancing the Structural Stability of Li-Rich Layered Cathodes. , 2023, Journal of the American Chemical Society.

[4]  W. Chu,et al.  Unveiling the Roles of Trace Fe and F Co-doped into High-Ni Li-Rich Layered Oxides in Performance Improvement. , 2023, ACS applied materials & interfaces.

[5]  Jiayin Li,et al.  Ultra-high Rate Capability of In-Situ Anchoring FeF3 Cathode onto Double-Enhanced Conductive Fe/Graphitic Carbon for High Energy Density Lithium-Ion Batteries , 2023, Nano Energy.

[6]  C. V. Singh,et al.  Manipulating Charge‐Transfer Kinetics of Lithium‐Rich Layered Oxide Cathodes in Halide All‐Solid‐State Batteries , 2022, Advanced materials.

[7]  X. Sun,et al.  Depolarization of Li‐rich Mn‐based oxide via electrochemically active Prussian blue interface providing superior rate capability , 2022, Carbon Energy.

[8]  Y. Liu,et al.  Understanding and Control of Activation Process of Lithium-Rich Cathode Materials , 2022, Electrochemical Energy Reviews.

[9]  Kehua Dai,et al.  Single-Crystal Nickel-Based Cathodes: Fundamentals and Recent Advances , 2022, Electrochemical Energy Reviews.

[10]  Faqiang Li,et al.  Insight into the Effect of Nb5+ on the Crystal Structure and Electrochemical Performance of the Li-rich Cathode Materials , 2022, Journal of Electroanalytical Chemistry.

[11]  Ruiqiang Guo,et al.  The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies , 2022, Energy Storage Materials.

[12]  Kehua Dai,et al.  Towards Ni-rich layered oxides cathodes with low Li/Ni intermixing by mild molten-salt ion exchange for lithium-ion batteries , 2022, Nano Energy.

[13]  Qiangqiang Tan,et al.  Li-Deficient Materials-Decoration Restrains Oxygen Evolution Achieving Excellent Cycling Stability of Li-Rich Mn-Based Cathode. , 2022, ACS applied materials & interfaces.

[14]  Jiliang Wu,et al.  In Situ Reconstruction of the Spinel Interface on a Li-Rich Layered Cathode Material with Enhanced Electrochemical Performances through HEPES and Heat Treatment Strategy , 2022, ACS Sustainable Chemistry & Engineering.

[15]  Dongdong Xiao,et al.  Al/Ti Synergistic Doping Enhanced Cycle Stability of Li‐Rich Layered Oxides , 2022, Advanced Functional Materials.

[16]  Jujun Yuan,et al.  Modulating Crystal and Interfacial Properties by W‐Gradient Doping for Highly Stable and Long Life Li‐Rich Layered Cathodes , 2022, Advanced Functional Materials.

[17]  M. Whittingham,et al.  Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation. , 2022, Chemical reviews.

[18]  Liwei Chen,et al.  Sulfuration of Li‐Rich Mn‐Based Cathode Materials for Multianionic Redox and Stabilized Coordination Environment , 2022, Advanced materials.

[19]  Faqiang Li,et al.  Systematic study of the effects of lithium deficiencies on the crystal structure and electrochemical performance of Li-rich materials , 2021, Journal of Alloys and Compounds.

[20]  Kehua Dai,et al.  Comprehensive understanding of Li/Ni intermixing in layered transition metal oxides , 2021, Materials Today.

[21]  Yunjian Liu,et al.  An Integrated Surface Coating Strategy to Enhance the Electrochemical Performance of Nickel-rich Layered Cathodes , 2021, Nano Energy.

[22]  Fernando Agulló-Rueda,et al.  Hydrothermal control of the lithium-rich Li2MnO3 phase in lithium manganese oxide nanocomposites and their application as precursors for lithium adsorbents. , 2021, Dalton transactions.

[23]  Haijun Yu,et al.  Reviving the lithium-manganese-based layered oxide cathodes for lithium-ion batteries , 2021 .

[24]  W. He,et al.  Challenges and Recent Advances in High Capacity Li‐Rich Cathode Materials for High Energy Density Lithium‐Ion Batteries , 2021, Advanced materials.

[25]  Yongcheng Jin,et al.  Synergetic effect of high Ni ratio and low oxygen defect interface zone of single crystals on the capacity retention of lithium rich layered oxides. , 2021, Journal of colloid and interface science.

[26]  Zhaoping Liu,et al.  Boosting energy efficiency of Li-rich layered oxide cathodes by tuning oxygen redox kinetics and reversibility , 2021 .

[27]  Deye Sun,et al.  Insight of high nickel Li-rich cathode materials for wide temperature operation , 2020 .

[28]  Bing Sun,et al.  Reviving Reaction Mechanism of Layered Lithium-Rich Cathode Materials for High-Energy Lithium-Ion Battery. , 2020, Angewandte Chemie.

[29]  Liang Deng,et al.  Local electronic structure modulation enhances operating voltage in Li-rich cathodes , 2019 .

[30]  L. Gu,et al.  Tuning Oxygen Redox Chemistry in Li‐Rich Mn‐Based Layered Oxide Cathodes by Modulating Cation Arrangement , 2019, Advanced materials.

[31]  Deye Sun,et al.  Synergistic effect of surface plane and particle sizes on the electrochemical performance of LiNi0.5Mn1.5O4 cathode material via a facile calcination process , 2019, Journal of Power Sources.

[32]  Hong Zhang,et al.  Lithium Deficiencies Engineering in Li-Rich Layered Oxide Li1.098Mn0.533Ni0.113Co0.138O2 for High Stability Cathode. , 2019, Journal of the American Chemical Society.

[33]  Qingshui Xie,et al.  Uniform Na+ Doping‐Induced Defects in Li‐ and Mn‐Rich Cathodes for High‐Performance Lithium‐Ion Batteries , 2019, Advanced science.

[34]  Zhaoping Liu,et al.  Understanding the Discrepancy of Defect Kinetics on Anionic Redox in Lithium-Rich Cathode Oxides. , 2019, ACS applied materials & interfaces.

[35]  Qinghua Zhang,et al.  Abundant nanoscale defects to eliminate voltage decay in Li-rich cathode materials , 2019, Energy Storage Materials.

[36]  Ya‐Xia Yin,et al.  Suppressing Surface Lattice Oxygen Release of Li‐Rich Cathode Materials via Heterostructured Spinel Li4Mn5O12 Coating , 2018, Advanced materials.

[37]  Ya‐Xia Yin,et al.  High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries , 2018, Advanced materials.

[38]  Yu Xie,et al.  Enhanced Rate Performance of Al-Doped Li-Rich Layered Cathode Material via Nucleation and Post-solvothermal Method , 2018 .

[39]  J. Tarascon,et al.  Fundamental interplay between anionic/cationic redox governing the kinetics and thermodynamics of lithium-rich cathodes , 2017, Nature Communications.

[40]  Biao Li,et al.  Anionic Redox in Rechargeable Lithium Batteries , 2017, Advanced materials.

[41]  Erqing Zhao,et al.  Effect of precipitators on the morphologies and electrochemical properties of Li1.2Mn0.54Ni0.13Co0.13O2 via rapid nucleation and post-solvothermal method , 2017 .

[42]  K. Edström,et al.  Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen. , 2016, Nature chemistry.

[43]  G. Ceder,et al.  The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials. , 2016, Nature chemistry.

[44]  Liquan Chen,et al.  Selecting Substituent Elements for Li-Rich Mn-Based Cathode Materials by Density Functional Theory (DFT) Calculations , 2015 .

[45]  B. Hwang,et al.  Understanding the Role of Ni in Stabilizing the Lithium-Rich High-Capacity Cathode Material Li[NixLi(1–2x)/3Mn(2–x)/3]O2 (0 ≤ x ≤ 0.5) , 2014 .

[46]  Doron Aurbach,et al.  Synthesis of Integrated Cathode Materials xLi2MnO3⋅ ( 1 − x ) LiMn1 / 3Ni1 / 3Co1 / 3O2 ( x = 0.3 , 0.5 , 0.7 ) and Studies of Their Electrochemical Behavior , 2010 .

[47]  G. Kresse,et al.  From ultrasoft pseudopotentials to the projector augmented-wave method , 1999 .

[48]  Burke,et al.  Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.

[49]  G. Kresse,et al.  Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set , 1996 .