Failure analysis on girth weld cracking of underground tee pipe

[1]  Peng-bo Wang,et al.  Investigation of weld cracking of a BOG booster pipeline in an LNG receiving station , 2021 .

[2]  W. Bin,et al.  Cracking analysis of a newly built gas transmission steel pipe , 2020 .

[3]  Hong Zhang,et al.  Fracture response of 1422-mm diameter pipe with double-V groove weld joints and circumferential crack in fusion line , 2020 .

[4]  Lin Wang,et al.  Stress concentration analysis of butt welds with variable wall thickness of spanning pipelines caused by additional loads , 2020 .

[5]  H. Lashgari,et al.  Fitness-for-service assessment and failure analysis of AISI 304 demineralized-water (DM) pipeline weld crack , 2020 .

[6]  A. K. Bhaduri,et al.  Evaluation of fracture resistance of AISI type 316LN stainless steel base and welded pipes with circumferential through-wall crack , 2019 .

[7]  Jong Min Yu,et al.  Cracking of 5Cr steel tee-pipe during start-up operation in heavy oil upgrade refinery , 2017 .

[8]  Y. Wei,et al.  Failure analysis of girth weld cracking of mechanically lined pipe used in gasfield gathering system , 2016 .

[9]  Jong Min Yu,et al.  Stress relaxation cracking in 304H stainless steel weld of a chemical reactor serviced at 560 °C , 2015 .

[10]  M. S. Attia,et al.  Failure analysis of thermowell weldment cracking , 2015 .

[11]  A. Carlucci,et al.  Crack Initiation and Growth in Bimetallic Girth Welds , 2014 .

[12]  Abhay K. Jha,et al.  Failure analysis of a high strength low alloy 0.15C–1.25Cr–1Mo–0.25V steel pressure vessel , 2013 .

[13]  Mohsen Karimi,et al.  Failure analysis of a high pressure natural gas pipe under split tee by computer simulations and metallurgical assessment , 2013 .

[14]  Kenan Genel,et al.  Stress concentration effects of undercut defect and reinforcement metal in butt welded joint , 2010 .

[15]  Kenneth A. Macdonald,et al.  Engineering Critical Assessment in the Complex Girth Welds of Clad and Lined Linepipe Materials , 2010 .

[16]  Inge Lotsberg,et al.  Stress concentrations due to misalignment at butt welds in plated structures and at girth welds in tubulars , 2009 .

[17]  A. A. Ostsemin,et al.  Stress-concentration coefficients of internal welding defects , 2008 .

[18]  Inge Lotsberg,et al.  Stress concentration factors at welds in pipelines and tanks subjected to internal pressure and axial force , 2008 .

[19]  C.R.F. Azevedo,et al.  Failure analysis of a crude oil pipeline , 2007 .

[20]  H. M. Shalaby,et al.  Failure analysis of fuel supply pipeline , 2006 .

[21]  Inge Lotsberg,et al.  Stress concentration factors at circumferential welds in tubulars , 1998 .