A Silica‐Aerogel‐Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus

High‐energy all‐solid‐state lithium (Li) batteries have great potential as next‐generation energy‐storage devices. Among all choices of electrolytes, polymer‐based systems have attracted widespread attention due to their low density, low cost, and excellent processability. However, they are generally mechanically too weak to effectively suppress Li dendrites and have lower ionic conductivity for reasonable kinetics at ambient temperature. Herein, an ultrastrong reinforced composite polymer electrolyte (CPE) is successfully designed and fabricated by introducing a stiff mesoporous SiO2 aerogel as the backbone for a polymer‐based electrolyte. The interconnected SiO2 aerogel not only performs as a strong backbone strengthening the whole composite, but also offers large and continuous surfaces for strong anion adsorption, which produces a highly conductive pathway across the composite. As a consequence, a high modulus of ≈0.43 GPa and high ionic conductivity of ≈0.6 mS cm−1 at 30 °C are simultaneously achieved. Furthermore, LiFePO4–Li full cells with good cyclability and rate capability at ambient temperature are obtained. Full cells with cathode capacity up to 2.1 mAh cm−2 are also demonstrated. The aerogel‐reinforced CPE represents a new design principle for solid‐state electrolytes and offers opportunities for future all‐solid‐state Li batteries.

[1]  Chem. , 2020, Catalysis from A to Z.

[2]  Li-zhen Fan,et al.  3D Fiber-Network-Reinforced Bicontinuous Composite Solid Electrolyte for Dendrite-free Lithium Metal Batteries. , 2018, ACS applied materials & interfaces.

[3]  Qiang Zhang,et al.  Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries , 2017 .

[4]  S. Choudhury,et al.  Nanoporous Hybrid Electrolytes for High‐Energy Batteries Based on Reactive Metal Anodes , 2017 .

[5]  Yi Cui,et al.  Reviving the lithium metal anode for high-energy batteries. , 2017, Nature nanotechnology.

[6]  Lynden A. Archer,et al.  Design principles for electrolytes and interfaces for stable lithium-metal batteries , 2016, Nature Energy.

[7]  Yayuan Liu,et al.  Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes. , 2016, Nature nanotechnology.

[8]  Yibo Wang,et al.  Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries , 2016, Proceedings of the National Academy of Sciences.

[9]  Yayuan Liu,et al.  Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode , 2016, Nature Communications.

[10]  Wei Liu,et al.  High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene oxide). , 2016, Nano letters.

[11]  Z. Deng,et al.  Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations , 2016 .

[12]  Lynden A. Archer,et al.  A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles , 2015, Nature Communications.

[13]  Yizhou Zhu,et al.  Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations. , 2015, ACS applied materials & interfaces.

[14]  Yang Shen,et al.  Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte , 2015 .

[15]  Winfried W. Wilcke,et al.  Flexible Ion‐Conducting Composite Membranes for Lithium Batteries , 2015 .

[16]  J. Goodenough,et al.  Superior Conductive Solid-like Electrolytes: Nanoconfining Liquids within the Hollow Structures. , 2015, Nano letters.

[17]  Venkataraman Thangadurai,et al.  Garnet-type solid-state fast Li ion conductors for Li batteries: critical review. , 2014, Chemical Society reviews.

[18]  Ji‐Guang Zhang,et al.  Lithium metal anodes for rechargeable batteries , 2014 .

[19]  Zhengyuan Tu,et al.  Nanoporous Polymer‐Ceramic Composite Electrolytes for Lithium Metal Batteries , 2014 .

[20]  Samuel Brunner,et al.  Mechanical properties of monolithic silica aerogels made from polyethoxydisiloxanes , 2014 .

[21]  T. Kyu,et al.  Highly conductive, completely amorphous polymer electrolyte membranes fabricated through photo-polymerization of poly(ethylene glycol diacrylate) in mixtures of solid plasticizer and lithium salt , 2014 .

[22]  Rachid Meziane,et al.  Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries. , 2013, Nature materials.

[23]  John B Goodenough,et al.  The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.

[24]  A. Hexemer,et al.  Resolution of the Modulus versus Adhesion Dilemma in Solid Polymer Electrolytes for Rechargeable Lithium Metal Batteries , 2012 .

[25]  Yuki Kato,et al.  A lithium superionic conductor. , 2011, Nature materials.

[26]  Alain C. Pierre,et al.  SiO 2 Aerogels , 2011 .

[27]  A. Dufresne,et al.  Nanocomposite polymer electrolyte based on whisker or microfibrils polyoxyethylene nanocomposites , 2010 .

[28]  J. Hay,et al.  Introduction to instrumented indentation testing , 2009 .

[29]  R. C. Agrawal,et al.  Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview , 2008 .

[30]  Mohammad Hasan Abbasi,et al.  Silica aerogel; synthesis, properties and characterization , 2008 .

[31]  M. Armand,et al.  Building better batteries , 2008, Nature.

[32]  Venkataraman Thangadurai,et al.  Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12 , 2007 .

[33]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[34]  A. Stephan,et al.  Review on gel polymer electrolytes for lithium batteries , 2006 .

[35]  F. Bates,et al.  Structure and properties of PBO–PEO diblock copolymer modified epoxy , 2005 .

[36]  T. Minami,et al.  Preparation of Li2S–P2S5 Amorphous Solid Electrolytes by Mechanical Milling , 2004 .

[37]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[38]  Michel Armand,et al.  The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors , 2004, Nature materials.

[39]  Liquan Chen,et al.  Understanding of effects of nano-Al2O3 particles on ionic conductivity of composite polymer electrolytes , 2003 .

[40]  Y. W. Kwon,et al.  Representative unit-cell models for open-cell metal foams with or without elastic filler , 2003 .

[41]  Ryoji Kanno,et al.  Lithium Ionic Conductor Thio-LISICON: The Li2 S ­ GeS2 ­ P 2 S 5 System , 2001 .

[42]  C. Wan,et al.  Conductivity Study of Porous Plasticized Polymer Electrolytes Based on Poly(vinylidene fluoride) A Comparison with Polypropylene Separators , 2000 .

[43]  D. Aurbach.  Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries , 2000 .

[44]  B. Scrosati,et al.  Nanocomposite polymer electrolytes for lithium batteries , 1998, Nature.

[45]  W. Meyer,et al.  Polymer electrolytes for lithium-ion batteries. , 1998, Advanced materials.

[46]  Takashi Uchida,et al.  High ionic conductivity in lithium lanthanum titanate , 1993 .

[47]  J. D. Robertson,et al.  Electrical properties of amorphous lithium electrolyte thin films , 1992 .

[48]  Y. Sadaoka,et al.  Ionic Conductivity of Solid Electrolytes Based on Lithium Titanium Phosphate , 1990 .

[49]  J. Gross,et al.  Mechanical properties of SiO 2 aerogels , 1988 .

[50]  B. Scrosati,et al.  The lithium-polymer electrolyte interface. I. Lithium cyclability , 1986 .

[51]  A. Rabenau,et al.  Ionic conductivity in Li3N single crystals , 1977 .

[52]  M. C. Shaw,et al.  The plastic behavior of cellular materials , 1966 .