Modelling and Simulation of Flow Maldistribution in Random Packed Columns with Gas-Liquid Countercurrent Flow

A macroscopic model, based on the volume-averaged equations of momentum and continuity, is presented to predict hydrodynamic characteristics of gas and liquid countercurrent flow in random packed columns. The main advantage of this approach is that the model equations derived from the mass and momentum conversation laws will remain valid on a wider range of length scale, from laboratory to industrial size packed columns. Therefore they can be used as basic tool for more rigorous design and scale up of packed columns. In this study, the large-scale liquid maldistribution was simulated using the proposed model for a 0.6-m diameter column packed with 25mm stainless steel Pall rings. The development of liquid flow patterns along the packed height was obtained for several different initial distributions of liquid phase. Furthermore, the effect of liquid and gas loads on the liquid distribution was examined. The simulation results are in good agreementwith the experimental data obtained in our laboratory for both water/air and isopar/air systems.

[1]  R. M. Stikkelman,et al.  A study of gas and liquid distributions in structured packings , 1989 .

[2]  E. Ruckenstein,et al.  Liquid distribution in packed columns , 1968 .

[3]  J. W. Tierney,et al.  Radial porosity variations in packed beds , 1958 .

[4]  L. A. Robbins.  Improve pressure-drop prediction with a new correlation , 1991 .

[5]  J. Schuster,et al.  Evaluation of steady flow profiles in rectangular and circular packed beds by a variational method , 1983 .

[6]  Reinhard Billet,et al.  Packed Towers: In Processing and Environmental Technology , 1995 .

[7]  Dominique Toye,et al.  Local measurements of void fraction and liquid holdup in packed columns using X-ray computed tomography 1 This contribution is dedicated to the remembrance of Professor Jaques Villermaux. 1 , 1998 .

[8]  F. J. Zuiderweg,et al.  Small scale and large scale liquid maldistribution in packed columns , 1986 .

[9]  M. Leva,et al.  Reconsider packed-tower pressure-drop correlations , 1992 .

[10]  Hiroshi Takeuchi,et al.  Liquid distribution in a packed column , 1973 .

[11]  Anthony G. Dixon,et al.  Correlations for wall and particle shape effects on fixed bed bulk voidage , 1988 .

[12]  Ephraim M Sparrow,et al.  Influence of Bed Size on the Flow Characteristics and Porosity of Randomly Packed Beds of Spheres , 1973 .

[13]  R. Kouri,et al.  Liquid and gas flow patterns in random packings , 1996 .

[14]  Brian Launder,et al.  A Reynolds stress model of turbulence and its application to thin shear flows , 1972, Journal of Fluid Mechanics.

[15]  Z. Cihla,et al.  A study of the flow of liquid when freely trickling over the packing in a cylindrical tower , 1957 .

[16]  R. F. Benenati,et al.  Void fraction distribution in beds of spheres , 1962 .

[17]  M. A. Albright.  Packed tower distributors tested , 1984 .

[18]  G. Froment,et al.  Voidage profiles in packed beds of spheres , 1986 .

[19]  Aibing Yu,et al.  Wall effect on the packing of cylindrical particles , 1996 .

[20]  E. A. Foumeny,et al.  Mean voidage of packed beds of cylindrical particles , 1991 .

[21]  J. P. V. Doormaal,et al.  ENHANCEMENTS OF THE SIMPLE METHOD FOR PREDICTING INCOMPRESSIBLE FLUID FLOWS , 1984 .

[22]  S. Ergun.  Fluid flow through packed columns , 1952 .

[23]  K. Porter,et al.  Experimental determinations of wall flow in packed columns , 1965 .

[24]  F. J. Zuiderweg,et al.  Radial liquid spread and maldistribution in packed columns under different wetting conditions , 1978 .