Feature extraction approach insensitive to temperature variations for impedance‐based structural health monitoring
暂无分享,去创建一个
José Alfredo Covolan Ulson | Fabricio Guimarães Baptista | Danilo Ecidir Budoya | Bruno Albuquerque de Castro | Fernando de Souza Campos | André Luiz Andreoli | B. A. Castro | F. S. Campos | J. Ulson | F. Baptista | A. Andreoli | D. E. Budoya
[1] Danilo Ecidir Budoya,et al. A Comparative Study of Impedance Measurement Techniques for Structural Health Monitoring Applications , 2018, IEEE Transactions on Instrumentation and Measurement.
[2] B. A. de Castro,et al. Equivalent Circuit of Piezoelectric Diaphragms for Impedance-Based Structural Health Monitoring Applications , 2017, IEEE Sensors Journal.
[3] Daniel J. Inman,et al. Feasibility of using impedance‐based damage assessment for pipeline structures , 2001 .
[4] Nicolás E. Cortez,et al. A new microcontrolled structural health monitoring system based on the electromechanical impedance principle , 2013 .
[5] P.A.A.F. Wouters,et al. Accurate estimation of the time-of-arrival of partial discharge pulses in cable systems in service , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.
[6] C. Y. Gao,et al. Investigation of the piezoelectric thrust test stand for rocket engine , 2009 .
[7] Daniel J. Inman,et al. Impedance-Based Structural Health Monitoring for Temperature Varying Applications , 1999 .
[8] Wieslaw Ostachowicz,et al. Delamination detection in CFRP panels using EMI method with temperature compensation , 2016 .
[9] Jeong-Tae Kim,et al. Temperature-Compensated Damage Monitoring by Using Wireless Acceleration-Impedance Sensor Nodes in Steel Girder Connection , 2012, Int. J. Distributed Sens. Networks.
[10] Charles R. Farrar,et al. Development of an extremely compact impedance-based wireless sensing device , 2008 .
[11] Hongping Zhu,et al. Electromechanical Impedance Analysis on Piezoelectric Smart Beam with a Crack Based on Spectral Element Method , 2015 .
[12] Aldemir Ap Cavalini,et al. Fault Detection of a Rotating Shaft by Using the Electromechanical Impedance Method and a Temperature Compensation Approach , 2017 .
[13] José Alfredo Covolan Ulson,et al. Assessment of Macro Fiber Composite Sensors for Measurement of Acoustic Partial Discharge Signals in Power Transformers , 2017, IEEE Sensors Journal.
[14] Guillermo Robles,et al. Separation of Radio-Frequency Sources and Localization of Partial Discharges in Noisy Environments , 2015, Sensors.
[15] Hongping Zhu,et al. A new three-dimensional electromechanical impedance model for an embedded dual-PZT transducer , 2016 .
[16] Yi-Qing Ni,et al. Correlating modal properties with temperature using long-term monitoring data and support vector machine technique , 2005 .
[17] S. Tenbohlen,et al. Detection and location of partial discharges in power transformers using acoustic and electromagnetic signals , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.
[18] Lingyu Yu,et al. Assessment of temperature effect in structural health monitoring with piezoelectric wafer active sensors , 2015 .
[20] José Alfredo Covolan Ulson,et al. An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-Based Structural Health Monitoring , 2014, Sensors.
[21] Eduardo Carlos Bianchi,et al. Digital signal processing of acoustic emission signals using power spectral density and counts statistic applied to single-point dressing operation , 2017 .
[22] Jia Zhao Chen,et al. EMI-Based Damage Identification for Beam Structures , 2014 .
[23] Sukesha,et al. Variation of piezoelectric coefficient and dielectric constant with electric field and temperature: A review , 2014, 2014 Recent Advances in Engineering and Computational Sciences (RAECS).
[24] Roberto Mendes Finzi Neto,et al. Impedance-based structural health monitoring and statistical method for threshold-level determination applied to 2024-T3 aluminum panels under varying temperature , 2017 .
[25] Firuz Zare,et al. Improving the efficiency of high power piezoelectric transducers for industrial applications , 2012 .
[26] W. Ostachowicz,et al. Temperature and damage influence on electromechanical impedance method used for carbon fibre–reinforced polymer panels , 2017 .
[27] Bart De Schutter,et al. Time-varying scheme for non-centralized model predictive control of large-scale systems , 2015 .
[28] Ali Bastani,et al. Identification of temperature variation and vibration disturbance in impedance-based structural health monitoring using piezoelectric sensor array method , 2012 .
[29] Chung Bang Yun,et al. Automated Impedance-based Structural Health Monitoring Incorporating Effective Frequency Shift for Compensating Temperature Effects , 2009 .
[30] B. Pioufle,et al. Monitoring of Microalgae Lipid Accumulation Using RF Open Ended Biosensor , 2017, IEEE Sensors Letters.
[31] Fabricio Guimarães Baptista,et al. Experimental analysis of the feasibility of low-cost piezoelectric diaphragms in impedance-based SHM applications , 2016 .
[32] Hyung Jin Lim,et al. Impedance based damage detection under varying temperature and loading conditions , 2011 .
[33] C. Tănăsoiu,et al. Effect of Temperature on The Main Piezoelectric Parameters of A Soft PZT Ceramic , 2007 .
[34] F. Baptista,et al. Impedance-based damage detection under noise and vibration effects , 2018 .
[35] You-Lin Xu,et al. Temperature effect on vibration properties of civil structures: a literature review and case studies , 2012 .
[36] Suresh Bhalla,et al. Structural impedance based damage diagnosis by piezo‐transducers , 2003 .
[38] Craig A. Rogers,et al. Coupled Electro-Mechanical Analysis of Adaptive Material Systems — Determination of the Actuator Power Consumption and System Energy Transfer , 1994 .