Limit analysis on surface roughness and dimensional accuracy of spray metallic crust for rapid tooling production by metal arc spraying process

Repetitively prototyping several prototypes of the same component using currently available rapid-prototyping equipment can be very costly. Substantial savings can be attained with the use of a metal spray process to produce a crust shell on a rapid-prototyping pattern coated with mould release agent (PVA), and then backing the crust with aluminium granules so as to form rapid mould/tooling (RT). The smoothness of the innermost spray layer and its dimensional accuracy in relation to the RP prototype are factors that ensure good quality of parts replicated by RT. This paper establishes a preliminary model for predicting the upper bound of the former and the lower bound of the latter, which have been experimentally verified by arc spraying zinc onto PVA. The theoretical model permits the prediction of spraying parameters for controlling the achievable surface finishing and dimensional accuracy of a spray in RT production.

[1]  Graham Bennett.  First National Conference on Rapid Prototyping and Tooling Research , 1995 .

[2]  H. Lau,et al.  A parametric investigation of arc spraying process for rapid mould making , 2003 .

[3]  G. H. Geiger,et al.  Transport Phenomena in Metallurgy , 1973 .

[4]  C. Finch.  Polyvinyl alcohol; properties and applications , 1973 .

[5]  Roger H. Rangel,et al.  Numerical simulation of substrate impact and freezing of droplets in plasma spray processes , 1993 .

[6]  V. Sobolev,et al.  Effect of substrate deformation on droplet flattening in thermal spraying , 1998 .

[7]  Allan F. M. Barton,et al.  CRC Handbook of solubility parameters and other cohesion parameters , 1983 .

[8]  Egon Matijević,et al.  Surface and Colloid Science , 1971 .

[9]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[10]  M. Pasandideh-Fard,et al.  On the spreading and solidification of molten particles in a plasma spray process effect of thermal contact resistance , 1995 .

[11]  C. Finch.  Polyvinyl alcohol : developments , 1992 .

[12]  Dimos Poulikakos,et al.  Modeling of the deformation of a liquid droplet impinging upon a flat surface , 1993 .

[13]  H. Steffens,et al.  Recent developments in arc spraying , 1990 .

[14]  B. Cantor,et al.  Arc spray forming of nickel aluminides , 1992 .

[15]  Joseph B. Franzini,et al.  Fluid Mechanics with Engineering Applications. 6th Ed. By R. L.DAUGHERTY and J. B. FRANZINI. McGraw-Hill. 1965. 574 pp. $9.95 or 80s. Fluid Dynamics. By J. W. DAILY and D. R. F. HARLEMAN. Addison Wesley. 1966. 454 pp. $12.50 or 94s. , 1967, Journal of Fluid Mechanics.

[16]  E. Lugscheider,et al.  Modeling of the APS plasma spray process , 1996 .

[17]  V. Sobolev,et al.  Influence of droplet impact angle on droplet-substrate mechanical interaction in thermal spraying , 1998 .

[18]  Chi Chiu Lau.  Preliminary development of automated rapid tooling process by metal arc spraying incorporated with STL file : investigation of surface roughness and dimensional accuracy of spray , 2001 .

[19]  Lee E. Weiss,et al.  Arc-sprayed steel-faced tooling , 1994 .

[20]  Radovan Kovacevic,et al.  On-Line Monitoring of the Electric Arc-Spraying Process Based on Acoustic Signatures , 1995 .

[21]  E. Lavernia,et al.  Spray Atomization and Deposition , 1996 .

[22]  Gerardo Trapaga,et al.  Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes , 1991 .